Introduction
Thank you for choosing the PANACARE Mini Bubble Gun. This automatic bubble machine is designed for ease of use and portability, providing an engaging experience for children aged 3 and up. This manual provides essential information for the safe and proper setup, operation, and maintenance of your bubble gun.
Image: Children enjoying the PANACARE Mini Bubble Gun.
Safety Information
- Age Recommendation: This product is not suitable for children under 36 months (3 years) due to small parts.
- Battery Safety: Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries. Insert batteries with correct polarity. Remove batteries if the product is not used for an extended period.
- Bubble Solution: Use only approved bubble solution. Avoid contact with eyes and mouth. In case of contact, rinse thoroughly with water.
- Supervision: Adult supervision is recommended during use.
Package Contents
Please check the package to ensure all items are present:
- 1 x PANACARE Mini Bubble Machine
- 1 x Bubble Solution Bottle
Setup Instructions
- Install Batteries: Locate the battery compartment, typically secured with a small screw. Use a screwdriver to open it. Insert 3 x 1.5V AA batteries (not included) according to the polarity markings. Close the compartment securely.
- Attach Bubble Solution: Unscrew the cap from the bubble solution bottle. Securely attach the bottle to the designated opening at the bottom of the bubble gun. Ensure it is tightly fastened to prevent leaks.
Image: Visual guide for battery installation and solution attachment.
Operating Instructions
- First Use: For the initial use, after installing batteries and solution, press and hold the trigger for 10-30 seconds. This allows the machine to expel any air in the tube and begin producing bubbles consistently.
- Generate Bubbles: Simply press and hold the trigger. The bubble gun will automatically generate a continuous stream of bubbles, accompanied by an LED light.
Image: The bubble gun in operation, highlighting its bubble output and LED light.
Maintenance
- After Use: When you finish using the bubble gun, pour any remaining bubble liquid from the bottle back into its original container or discard it.
- Cleaning the Tube: Replace the bubble solution bottle with a bottle of clean water. Press the trigger for a few seconds to flush the internal tube, preventing clogs and keeping the machine clean.
- Battery Storage: If the bubble gun will not be used for an extended period, remove the batteries to prevent leakage and extend the device's lifespan.
- Exterior Cleaning: Wipe the exterior of the bubble gun with a damp cloth. Do not submerge the device in water.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No bubbles are produced. |
|
|
| Bubble gun is leaking. |
|
|
| Difficulty opening battery compartment. |
|
|
Specifications
- Model: B0DNVS4WY8
- Brand: P PANACARE
- Product Dimensions: 12 x 12 x 4.5 cm (4.7 x 4.7 x 1.7 inches)
- Item Weight: 6.7 ounces (approximately 190g)
- Material: ABS Plastic
- Bubble Output: 5000+ bubbles per minute
- Batteries Required: 3 x 1.5V AA batteries (not included)
- Recommended Age: 3 years and up
Warranty and Support
For any questions, concerns, or support regarding your PANACARE Mini Bubble Gun, please contact P PANACARE customer service. You can find more information and contact details on the official P PANACARE Amazon Store.
Please retain your purchase receipt for any warranty claims.
