diymore Standardmodell

Download PDF
Contents

diymore Battery Capacity Voltage Meter User Manual

Model: Standardmodell (AM03-GXQG0152-007) | Brand: diymore

1. Introduction

The diymore Battery Capacity Voltage Meter is a versatile instrument designed to measure battery capacity, voltage, and temperature. It is suitable for a wide range of applications, including various battery types such as lead-acid and lithium batteries, and can be used in diverse settings from automotive to DIY solar projects. This manual provides detailed instructions for the proper use, installation, and maintenance of your diymore Battery Capacity Voltage Meter. Please read this manual thoroughly before operation to ensure optimal performance and safety.

2. Key Features

  • Multi-functional: Measures battery capacity, voltage, and temperature (switchable between °C and °F).
  • Protective Design: Features a dust and waterproof surface with reverse input connection protection.
  • Integrated Temperature Sensor: Measures temperature from -19 to 80 °C (-2.2 to 179 °F).
  • Configurable Modes: Six programmable modes including battery type setting, delayed shutdown (10-120 seconds), adjustable battery percentage limits, undervoltage alarm, overtemperature alarm, and voltage calibration.
  • Wide Application: Suitable for jet skis, golf carts, RVs, lawn mowers, aquariums, DIY solar generators, and more.
diymore Battery Capacity Voltage Meter
Figure 2.1: The diymore Battery Capacity Voltage Meter, showing its display and compact design.

3. Technical Specifications

ParameterValue
Working Voltage10-100V
Working Current Consumption8-10mA
Delay Time (Adjustable)10s, 20s, 30s, 60s, 120s
Standby Power Consumption15-20uA
Voltage Accuracy±0.1% - ±0.5%
Temperature Accuracy±0.5℃ - ±1℃
Temperature Range-19~80℃ (-2.2~179℉)
Working Temperature-10~65℃
Product Size61.5 x 33.5 x 13.5 mm
Installation Size58.5 x 28.5 mm
Display Size33 x 16.5 mm
Weight30 g
Dimensions of diymore Battery Capacity Voltage Meter
Figure 3.1: Dimensions of the diymore Battery Capacity Voltage Meter, showing its compact size for integration.
Table of specifications for diymore Battery Capacity Voltage Meter
Figure 3.2: Detailed technical parameters of the diymore Battery Capacity Voltage Meter.

4. Setup and Installation

4.1 Wiring Instructions

The product is designed for direct wiring. Ensure correct polarity during connection.

  • Connect the Red line to the positive terminal of the battery.
  • Connect the Black line to the negative terminal of the battery.
  • If an external NTC temperature sensor is included (selective assembly), please connect it to the designated port. Do not squeeze the sensor.
Wiring diagram for diymore Battery Capacity Voltage Meter
Figure 4.1: Wiring diagram showing positive (red) and negative (black) connections to the battery.

4.2 Mounting

The meter is designed for flush mounting. It features a buckle for installation without the need for screws.

  • Ensure the installation area is clean and dry.
  • Carefully insert the meter into the prepared opening until the buckle engages securely.
Back view of diymore Battery Capacity Voltage Meter showing power cord and temperature sensor port
Figure 4.2: Rear view of the meter, highlighting the power cord connection and the built-in temperature sensor location.

5. Operating Instructions

5.1 Basic Operation

  1. Once powered, the instrument will display the battery percentage, voltage value, and analog battery symbols.
  2. To turn on the instrument, press the button. In close mode, you can wake up the instrument by pressing any button. The product can go to sleep automatically after your selected delay time if this function is turned on.
  3. The battery symbols on the display interface, from right to left, represent 7 display boxes showing the power pool from low to high.
  4. The voltage on the display interface is measured in real time, and the voltage value is displayed on 10-100V without external power supply.
  5. The percentage on the display interface is the percentage of the remaining battery power.
  6. Fahrenheit and Celsius can be switched. The basic version shows product temperature, while the upgraded version shows ambient temperature.
  7. When the battery is connected to the charger or discharging high current, the display parameters may fluctuate.
Display of diymore Battery Capacity Voltage Meter showing percentage, voltage, and temperature
Figure 5.1: The meter's display showing battery percentage, voltage, and temperature readings.

5.2 Advanced Settings (SET Button)

The button behind the unit (SET) is used to configure various functions. Note that accessing this button requires the unit to be unmounted if already installed.

  • Change Battery Type: Select between Lithium Battery (L), Lead Acid Battery (P), or LiFeCoPO4 Battery (F).
  • Setting Delay OFF/ON & Delay Time: Adjust the automatic shutdown delay time (10-120 seconds).
  • Customize Voltage of Percentage 0 to 100: Set the upper and lower limits for battery percentage display.
  • Recalibration: Perform voltage calibration for accurate readings.
  • Enable Undervoltage Alarm and Threshold (Selective Assembly): If enabled, the buzzer will ring at 1-second intervals with a flashing volt display when battery voltage is lower than the set threshold.
  • Enable Overtemperature Alarm (Selective Assembly): If enabled, the buzzer will ring at 1-second intervals with a flashing volt display when battery temperature exceeds the set threshold.
  • If the battery specification is special, you can enter set mode 3 and reset the upper and lower limits of the measured battery voltage.
Four functions of diymore Battery Capacity Voltage Meter: change battery type, delay settings, percentage customization, recalibration
Figure 5.2: Overview of the four main configurable functions of the meter.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the display and casing. Do not use abrasive cleaners or solvents.
  • Environmental Conditions: Avoid exposing the meter to extreme temperatures, direct sunlight, or high humidity for prolonged periods.
  • Disassembly: Do not attempt to disassemble or modify the product. Contains electronic parts. Unauthorized disassembly voids warranty and may cause damage or injury.
  • Storage: If storing the meter for an extended period, disconnect it from the power source and store it in a cool, dry place.
Warning label for diymore Battery Capacity Voltage Meter advising against disassembly
Figure 6.1: Important warning regarding product disassembly and modification.

7. Troubleshooting

ProblemPossible CauseSolution
Display is blankNo power, incorrect wiring, or unit in sleep mode.Check power connections and polarity. Press any button to wake the unit. Ensure battery voltage is within 10-100V range.
Inaccurate readingsIncorrect battery type setting, need for calibration, or high current discharge/charge.Verify battery type setting using the SET button. Perform voltage recalibration. Readings may fluctuate during high current events; observe during stable conditions.
Buzzer alarm soundsUndervoltage or overtemperature alarm triggered (if enabled).Check battery voltage and temperature. Address the underlying issue (e.g., charge battery, cool environment). Adjust alarm thresholds if necessary via SET button.
Display parameters fluctuateBattery is actively charging or discharging at high current.This is normal behavior. Readings will stabilize once charging/discharging ceases or current draw is low.

8. Warranty Information

This diymore product is manufactured with high quality standards. For specific warranty terms and conditions, please refer to the purchase documentation or contact diymore customer support. Please note that unauthorized disassembly or modification of the product will void the warranty.

9. Customer Support

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact diymore customer service through the retailer where the product was purchased or visit the official diymore website.

You can also visit the diymore Store on Amazon for more information and products.

© 2025 diymore. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.