Introduction
Thank you for choosing the ALAULM M-7 Seats Aluminum Patio Furniture Set with Propane Fire Pit Table. This set is designed to provide comfort and style for your outdoor living space. It features a durable aluminum frame, comfortable cushions, swivel chairs, ottomans, and a functional propane fire pit table. This manual provides essential information for assembly, operation, maintenance, and safety to ensure a long and enjoyable experience with your new furniture set.

Image: Overview of the ALAULM M-7 Seats Aluminum Patio Furniture Set.
Safety Information
Please read and understand all safety warnings before assembling or operating this product. Failure to follow these instructions may result in property damage, personal injury, or death.
- Keep children and pets away from the fire pit table when in use.
- Always follow assembly instructions carefully to prevent injury.
- Keep small parts out of reach of young children.
- Ensure the fire pit is placed on a level, non-combustible surface.
- Do not store propane cylinders indoors.
- Never leave the fire pit unattended when lit.
Package Contents
Your ALAULM patio furniture set is delivered in multiple boxes (typically 5 boxes) which may arrive at different times. Please verify all components are present before beginning assembly. The package includes:
- 1 x 3-Seat Sofa
- 1 x Fire Pit Table
- 2 x Swivel Chairs
- 2 x Ottomans
- Seat and Back Cushions for all seating units
- Assembly Hardware and Tools
- Fire Pit Windshield and Blue Glass Stones
- Fire Pit Lid

Image: Product dimensions and included components.
Assembly Instructions
Assembly is required for this furniture set. It is recommended that two people assemble the larger pieces. Follow the detailed instructions provided in the separate assembly guide included in your package. A general tip for assembly is to not fully tighten any screws until all components are loosely fitted together. This allows for easier alignment and prevents stripping of screws.
Sofa and Chairs Assembly
- Unpack all sofa and chair components and lay them out on a soft, clean surface to prevent scratches.
- Attach the backrests to the seat frames using the provided hardware.
- Secure the armrests to the assembled back and seat frames.
- For swivel chairs, ensure the swivel mechanism is correctly oriented and securely attached to the chair base.
- Once all parts are loosely assembled, gradually tighten all screws until secure.
- Place cushions on the assembled frames. The cushions feature a zipper design for easy removal and cleaning.

Image: Sturdy all-aluminum frame construction.

Image: Swivel and rocking chair features.
Fire Pit Table Assembly
- Assemble the fire pit table base and attach the tabletop.
- Install the burner unit into the designated opening in the tabletop.
- Connect the gas hose to the burner and route it to the propane tank storage area.
- Carefully place the blue glass stones around the burner.
- Install the tempered glass windshield around the burner for safety and aesthetics.

Image: Fire Pit Table features.
Ottoman Assembly
- Assemble the ottoman frames using the provided hardware.
- Place the ottoman cushions on the assembled frames.

Image: Multi-purpose ottoman.
Assembly Videos
Video: Assembly and features of the ALAULM Aluminum Swivel Chair Set.
Video: Overview of the ALAULM Aluminum Patio Furniture Set with Swivel Chairs, including assembly tips.
Operating Instructions (Fire Pit Table)
The fire pit table is CSA certified, ensuring it meets safety standards. It features a 55,000 BTU heat output and an automatic ignition system for ease of use.
Connecting the Propane Tank
- Ensure the fire pit control knob is in the "OFF" position.
- Connect the gas hose from the fire pit to a standard 20 lb propane tank (not included). Hand-tighten the connection firmly.
- Place the propane tank securely within the designated compartment in the fire pit table.
- Slowly open the valve on the propane tank.
Igniting the Fire Pit
- Press and hold the ignition button while slowly turning the control knob to the "LOW" position.
- Continue to hold the ignition button for 10-15 seconds to allow gas to flow and ignite.
- Once ignited, release the ignition button.
- Adjust the flame height by rotating the control knob between "LOW" and "HIGH" as desired.
Turning Off the Fire Pit
- Turn the control knob to the "OFF" position.
- Close the valve on the propane tank.
- Allow the fire pit to cool completely before covering or storing.

Image: Fire Pit control panel and components.

Image: Fire pit table with cover, used as a regular table.
Maintenance
Regular maintenance will help prolong the life and appearance of your patio furniture set.
Aluminum Frame
- The aluminum frame is rust-proof and durable. Clean with a soft cloth, mild soap, and water. Rinse thoroughly and dry completely.
- Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.

Image: Detail of the aluminum frame.
Cushions
- The 5.1-inch thick sponge cushions are designed for resilience.
- Cushion covers can be removed via zippers for cleaning. Hand wash with mild soap and cold water, or spot clean. Air dry only.
- Store cushions indoors during inclement weather or prolonged periods of non-use to prevent fading and wear.

Image: 5.1-inch extra-thick seat cushions.
Troubleshooting
If you encounter issues with your patio furniture set, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fire pit does not ignite. | Propane tank valve closed, low propane, igniter not sparking, gas line obstruction. | Ensure propane tank valve is fully open. Check propane level. Verify igniter is clicking and sparking. Check for kinks in the gas line. |
| Unstable furniture. | Loose bolts, uneven surface. | Check and tighten all assembly bolts. Move furniture to a level surface. |
| Cushions appear flat or misshapen. | New cushions settling, prolonged compression. | Allow time for cushions to fully expand after unpacking. Gently massage or fluff cushions to help them regain shape. |
If problems persist, please contact customer support for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | ALAULM |
| Model | M-7 Seats w/Swivel+Fire Pit+Ottomans |
| Color | Dark Blue |
| Material Type | Aluminum |
| Style | Modern |
| Assembly Required | Yes |
| Fire Pit Heat Output | 55,000 BTU |
| Fire Pit Certification | CSA Certified |
| Swivel Chair Weight Capacity | 500 lbs (approximate, based on similar products) |
| Cushion Thickness | 5.1 inches |
Warranty and Support
For any issues such as missing or damaged accessories, please contact ALAULM customer service. Our team is committed to responding within 24 hours to assist you.
Please refer to your purchase documentation for specific warranty details and contact information.





