1. Introduction and Overview
The Beatbot Cordless Robotic Pool Vacuum Cleaner is an advanced, intelligent device designed to provide effortless and thorough cleaning for your pool. Featuring smart navigation and powerful suction, this robotic cleaner efficiently cleans the floor, walls, and waterline of your pool, ensuring sparkling clean water with minimal effort. Its cordless design offers unparalleled convenience and flexibility.
2. Setup and Initial Use
Before first use, ensure your Beatbot cleaner is fully charged. The device charges via a standard power cord connected to its charging station. A full charge typically takes approximately 4 hours.
2.1 Charging and Deployment
To charge the unit, place it on its charging station and connect the power cord to a standard outlet. Once fully charged, simply lift the cleaner off the station. The Beatbot app allows you to program your pool's layout and cleaning preferences. After programming, place the cleaner directly into the pool. It will automatically begin its cleaning cycle based on your settings.
3. Operating Instructions
The Beatbot cleaner offers flexible operating modes, controllable both via on-unit buttons and through the dedicated mobile application. The unit features buttons for selecting floor-only cleaning or a combined floor and wall cleaning mode. For more advanced options and detailed control, utilize the Beatbot app.
3.1 Cleaning Modes and Battery Life
The cleaner is equipped with a 10,000 mAh Lithium-Ion battery, providing ample power for comprehensive cleaning. In floor-only mode, the battery can last for approximately 4 hours of continuous cleaning. For combined floor and wall cleaning, the battery life is around 3.5 hours. The cleaner's smart navigation system, enhanced by ultrasonic sensors, ensures efficient coverage and prevents it from getting stuck.
3.2 Wall Climbing and Waterline Cleaning
The Beatbot cleaner is designed to effectively climb pool walls and scrub the waterline, ensuring a thorough clean from top to bottom. Its powerful suction and robust brushes work in conjunction to remove debris and algae from all surfaces.
4. Maintenance
Regular maintenance is crucial for optimal performance and longevity of your Beatbot cleaner.
4.1 Filter Basket Cleaning
The cleaner features an easily accessible filter basket designed to capture debris. After each cleaning cycle, remove the filter basket and hose it out thoroughly to remove collected dirt, leaves, and other particles. The fine mesh of the filter effectively retains even small debris, preventing it from recirculating into the pool.
4.2 Brush Maintenance
The Beatbot cleaner is equipped with large, durable brushes that can be replaced if they become worn or damaged. This ensures consistent cleaning performance over time. Inspect the brushes regularly for any signs of wear and replace them as needed.
5. Troubleshooting
If you encounter any issues with your Beatbot Cordless Robotic Pool Vacuum Cleaner, please refer to the following common troubleshooting tips:
- Poor Cleaning Performance: Ensure the filter basket is clean and free of debris. A clogged filter can reduce suction power.
- Incomplete Coverage: Verify that your pool's layout is correctly programmed in the Beatbot app. The cleaner learns your pool's environment over time, so ensure the app is updated for optimal performance.
- Unit Not Moving/Stuck: Check for any large obstructions in the pool that might be impeding the cleaner's movement. The ultrasonic sensors are designed to prevent this, but extreme cases may occur.
- Charging Issues: Ensure the charging station is properly connected to a power source and the cleaner is correctly docked.
- Connectivity Problems: Ensure your Wi-Fi signal is strong enough near the pool area for optimal app control.
For further assistance, please contact Beatbot customer support.
Important Safety Information: Lithium-ion batteries come with an inherent risk of overheating, catching fire, or even exploding—especially when exposed to water or heat. Always follow charging and usage guidelines carefully.
6. Specifications
| Feature | Description |
|---|---|
| Model Name | Robotic Pool Vacuum Cleaner |
| Special Feature | Cordless, Smart Navigation |
| Control Method | App |
| Battery Type | 1 Lithium Ion (included) |
| Lithium Battery Energy Content | 203.04 Watt Hours |
| Item Weight | 36.3 pounds |
| Product Dimensions | 18 x 17 x 9 inches |
| Capacity | 2 Liters |
| Material | Plastic |
| Color | Blue |
| Efficiency | High efficiency, Complete Pool Coverage, Dual-Pass Waterline Scrubbing |
7. Warranty and Support
The Beatbot Cordless Robotic Pool Vacuum Cleaner comes with a Limited Warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or contact Beatbot customer support.
7.1 Customer Support
For any questions, technical assistance, or warranty claims, please reach out to Beatbot customer support:
- Email: service@beatbot.com
- Website: www.beatbot.com
- Phone (North America): (833) 702-4399
- Support Hours: Monday - Sunday, 9:00 AM - 6:00 PM (CST)
