WYWNA Solar Street Lights Outdoor 2-Pack 6500W Instruction Manual

1. Introduction

Thank you for choosing the WYWNA Solar Street Lights Outdoor. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new solar street lights. Please read this manual thoroughly before use and retain it for future reference.

Package Contents:

• 2 x WYWNA Solar Street Lights
• 2 x Remote Controls
• Mounting Hardware (screws, anchors)
• User Manual

2. Safety Information

Please observe the following safety precautions to prevent injury or damage to the product:

• Ensure all components are securely fastened during installation to prevent the light from falling.
• Do not disassemble or modify the product. Unauthorized modifications can lead to malfunction or damage and void the warranty.
• Keep the solar panel clean to ensure optimal charging efficiency.
• Avoid direct eye exposure to the LED light source when illuminated.
• Install the light in a location that receives direct sunlight for at least 6-8 hours daily to ensure full battery charge.
• This product is designed for outdoor use and is waterproof. However, avoid submerging it in water.

3. Product Features

• Super Bright Illumination: Equipped with advanced 5730-type LED beads, emitting 6000K cool white light for wide area coverage and over 50,000 hours of operational life.
• Ultra-Wide Angle Lighting: Features a 4-sided design providing 320-degree illumination with 1120 high-efficiency 5730-type lamp beads, covering an area up to 2536 sq.ft.
• Efficient Solar Charging: Utilizes a 6V/5W polycrystalline solar panel with a 25% energy conversion rate. The 5000mAH battery charges in 4-6 hours, providing 6-8 hours of continuous lighting.
• Zero Electricity Cost: The 6500W commercial solar street light uses a 6V/35W high-efficiency solar panel. The 3.2V-30000mAH large-capacity battery ensures 8-10 hours of lighting at night.
• Intelligent Lighting Modes: Offers three operational modes controlled by a remote for convenience.

4. Installation and Setup

Proper installation is crucial for optimal performance of your solar street lights.

4.1 Choosing an Installation Location

Select a location that receives direct, unobstructed sunlight for at least 6-8 hours daily. Avoid areas under trees, eaves, or other structures that may shade the solar panel.

4.2 Mounting the Light

The lights are designed for pole mounting. The recommended installation height for optimal coverage is between 10-23 feet (3-7 meters).

1. Attach the mounting bracket to the pole using the provided screws and anchors. Ensure the bracket is securely fastened.
2. Mount the solar street light onto the bracket. Adjust the angle of the light to direct illumination as desired.
3. Ensure the solar panel faces upwards towards the sun to maximize charging efficiency.

Image: WYWNA Solar Street Light installed on a pole, demonstrating its 320-degree wide angle design and illumination range over a tennis court. Recommended installation height is 10-23 ft.

Image: Visual comparison showing the superior coverage of 220-degree wide angle lighting from the WYWNA solar street light compared to a standard 120-degree light. Installation height shown is 8-10 ft.

4.3 Initial Charge

Before first use, allow the solar light to charge for at least 1-2 full sunny days in the OFF position to ensure the battery is fully charged. This optimizes battery performance and longevity.

Image: Illustration of the A-Grade Polycrystalline High Efficiency Solar Panel, demonstrating a conversion rate up to 25%, 6-8 hours for full charge, and 8-10 hours of lighting throughout the night.

5. Operating Instructions

Your WYWNA Solar Street Lights are equipped with a remote control for convenient operation and mode selection.

5.1 Automatic Operation

The solar street light is designed to automatically turn on at dusk and turn off at dawn, charging during the day.

5.2 Remote Control Functions

Use the included remote control to select from the following lighting modes:

Image: Overview of the WYWNA Solar Street Lights package, including two lights, two remote controls, and a separate solar panel for the 6500W model.

• Mode 1 (Motion Sensor): The light maintains 30% brightness until motion is detected, then automatically adjusts to 100% brightness. After a period of no motion, it returns to 30% brightness.
• Mode 2 (Always Lighting): The light stays on continuously at a selected brightness level. You can adjust the brightness to 25%, 50%, 75%, or 100% using the remote.
• Mode 3 (Timed Lighting): Set the light to operate for a specific duration: 2 hours, 3 hours, 5 hours, 6 hours, or 8 hours. After the set time, the light will turn off.
• ON/OFF Button: Manually turn the light on or off.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your solar street lights.

• Clean Solar Panel: Periodically wipe the solar panel with a soft, damp cloth to remove dust, dirt, leaves, or snow. A clean panel ensures maximum sunlight absorption and charging efficiency.
• Inspect Fixture: Check the light fixture and mounting hardware regularly for any signs of wear, damage, or loose connections. Tighten screws if necessary.
• Battery Care: The integrated battery is designed for long life. Ensure the light receives adequate sunlight for charging, especially during winter months, to maintain battery health.

7. Troubleshooting

If you encounter issues with your solar street light, refer to the following common problems and solutions:

• Light does not turn on at night:
  • Ensure the light is switched ON.
  • Verify the solar panel is receiving direct sunlight for at least 6-8 hours daily. Relocate if necessary.
  • Check for any obstructions (e.g., leaves, dirt) on the solar panel and clean it.
  • The battery might be low. Allow 1-2 full sunny days for charging.
• Light stays dim or only lights for a short period:
  • Insufficient sunlight for charging. Ensure optimal solar panel exposure.
  • Battery capacity may be reduced due to prolonged cloudy weather or age.
  • Ensure the remote control is set to the desired brightness level or timed mode.
• Remote control is not working:
  • Check if the remote control battery needs replacement.
  • Ensure there are no obstructions between the remote and the light's sensor.
  • Point the remote directly at the light's sensor.

8. Specifications

9. Warranty and Support

WYWNA provides a 2-Year Promise for this product, ensuring quality and customer satisfaction. For any questions, technical support, or warranty claims, please contact WYWNA customer service through your purchase platform or the official WYWNA website.

Please have your purchase details and product model information ready when contacting support.