MIPOW x Miffy BTA700M Cool Mist Humidifier Instruction Manual

2. Package Contents

Verify that all items are present in the package:

• 1 x Miffy Humidifier
• 1 x Cotton Core (pre-installed)
• 1 x Spare Cotton Core
• 1 x USB-C Charging Cable
• 1 x Instruction Manual

Image: The package contents of the Miffy humidifier, showing the humidifier unit, a cotton core, a USB-C cable, and the instruction manual.

3. Product Overview

The MIPOW x Miffy Humidifier is designed for ease of use and aesthetic appeal. Key features include:

• Ultrasonic Technology: Ensures quiet operation for an undisturbed environment.
• 450ml Water Tank: Provides up to 10 hours of continuous mist on a single fill.
• Multiple Mist Settings: Choose between single mist, double mist, and intermittent mist modes.
• Night Light Function: A soft, warm light illuminates the Miffy figure, creating a cozy ambiance.
• USB-C Powered: Compatible with various USB power sources (adapter, power bank, laptop).
• Compact Design: Ideal for small to medium-sized rooms, desks, or nurseries.

Image: Visual representation of humidifier features including 450ml capacity, 5-8 hour runtime, warm light, and quiet operation.

Image: An overview of the Miffy humidifier highlighting double spray ports, 450ml capacity, night light, mist modes, USB power, and single button control.

4. Setup

Follow these steps for initial setup:

1. Remove Top Cover: Gently twist and lift the top cover of the humidifier.
2. Remove Miffy Figure: Carefully take out the Miffy figure from the water tank.
3. Prepare Cotton Core: Remove the cotton core from its housing. Important: Soak the cotton core completely in water for 2-3 minutes before first use. This ensures proper water absorption and mist output.
4. Fill Water Tank: Fill the transparent water tank with clean water. Distilled water is recommended to prevent mineral buildup, especially in hard water areas. Do not exceed the maximum fill line (if indicated) or fill past the top of the inner container.
5. Reinsert Cotton Core: Place the soaked cotton core back into its housing, ensuring it is securely fitted.
6. Place Miffy Figure: Return the Miffy figure to its position inside the water tank.
7. Replace Top Cover: Securely place the top cover back onto the humidifier.
8. Connect Power: Plug the USB-C cable into the humidifier's port and connect the other end to a USB power source (e.g., USB adapter, power bank, laptop).

Video: A demonstration of the Miffy Humidifier setup, including soaking the cotton swab, filling the water tank, and assembling the unit. This video shows the yellow variant of the humidifier.

Image: A hand pouring water into the humidifier's transparent tank, demonstrating the easy-fill design.

5. Operating Instructions

The humidifier is controlled by a single touch-sensitive button located on the top cover.

• Power On/Off:
  • Short press the button once to turn on the humidifier and activate the default mist mode (double mist).
  • Long press the button (for approximately 3 seconds) to turn off the humidifier.
• Mist Mode Selection:
  • After turning on, short press the button again to switch to single mist mode.
  • Short press the button a third time to switch to intermittent mist mode (mists for a few seconds, then pauses).
  • Short press the button a fourth time to return to double mist mode.
• Night Light Control:
  • When the humidifier is on, long press the button (for approximately 3 seconds) to turn the night light on or off. The night light operates independently of the mist function.

Image: Illustration of the three mist modes: Double, Single, and Intermittent, demonstrating varying mist outputs.

Video: A short video demonstrating the Miffy Humidifier's double spray function and night light, showcasing its operation and cute design.

6. Maintenance

Regular cleaning and maintenance will prolong the life of your humidifier.

• Daily Cleaning:
  • Empty any remaining water from the tank.
  • Wipe the inside of the tank with a soft, damp cloth.
  • Rinse the tank thoroughly with clean water.
  • Allow all parts to air dry completely before reassembly or storage.
• Weekly Cleaning (or as needed):
  • If mineral deposits (white scale) accumulate, fill the tank with a mixture of equal parts white vinegar and water. Let it soak for 30 minutes to an hour.
  • Scrub gently with a soft brush or cloth to remove deposits.
  • Rinse thoroughly to remove all vinegar residue.
• Cotton Core Replacement:
  • The cotton core should be replaced every 1-3 months, or sooner if you notice reduced mist output or an unpleasant odor.
  • Always soak a new cotton core for 2-3 minutes before installation.
• Water Type:
  • Use clean tap water or distilled water. Do not use essential oils, perfumes, or other aromatic liquids directly in the water tank, as this can damage the humidifier and void the warranty.

Image: The humidifier's water tank is shown, emphasizing its wide circular design for easy filling and cleaning.

7. Troubleshooting

8. Specifications

9. Warranty and Support

MIPOW provides professional after-sales service. In case of any problems or complaints during use or installation, please do not hesitate to contact us. We will respond with solutions within 24 hours.

For support, please refer to the contact information provided in your product packaging or visit the official MIPOW website.