Agrieyes AG-CT018

Agrieyes AG-CT018 7-Pin Trailer Wiring Harness with Junction Box User Manual

Model: AG-CT018

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Agrieyes AG-CT018 7-Pin Trailer Wiring Harness with Junction Box. This product is designed to provide a reliable electrical connection between your towing vehicle and trailer, ensuring proper function of lights and brakes. Please read this manual thoroughly before installation and use.

Agrieyes 7-Way Trailer Wiring Harness Kit connected to a trailer and towing vehicle.

Image: The Agrieyes 7-Way Trailer Wiring Harness Kit providing electrical connection between a towing vehicle and a travel trailer.

Product Features

  • Simple Wiring: Features a 7-gang junction box with color-coded terminals for easy identification and connection to the towing vehicle's electrical system.
  • Reliable Connection: Equipped with a dual-pin design 7-pin plug for stable and consistent power delivery.
  • Sealed Protection: Includes 4 open and 4 closed rubber grommets for the heavy-duty junction box, ensuring waterproof and weatherproof performance.
  • Premium Material: Constructed with a flame-retardant ABS junction box and high-conductivity copper wire for durability and long-term use.
  • Versatile Application: Ideal for RVs, trailers, campers, caravans, food trucks, and other towing vehicles.

What's in the Box

  • 1 x Agrieyes 7 Pin Trailer Wiring Harness with 7 Gang Junction Box

Setup and Wiring Guide

Proper wiring is crucial for the safe operation of your trailer. Follow the color-coded guide carefully. The junction box simplifies connections by providing clearly labeled terminals.

Junction Box Wiring

The 7-gang junction box features color-coded terminals corresponding to standard trailer wiring functions. Refer to the diagram below for correct connections.

Easy Wiring Guide for 7-pin trailer harness showing junction box, RV standard, trailer standard, and trailer 4-way color codes.

Image: An easy wiring guide illustrating the color codes for the 7-pin trailer harness junction box, and how they correspond to RV standard, trailer standard, and trailer 4-way wiring.

7-Pin Trailer Wiring Color Code
Wire ColorFunction
WhiteGround
Black12V Auxiliary Power
YellowReverse Lights
RedLeft Turn/Stop
GreenRunning Lights
BrownRight Turn/Stop
BlueElectric Brake

Important Note: While this harness uses standard color codes, always verify the functions of your towing vehicle's wiring and trailer's wiring against this diagram before making connections. Discrepancies can occur with different vehicle manufacturers.

7-Pin Plug Connection

The 7-pin plug is designed for a secure and stable connection. Each pin corresponds to a specific function as detailed below.

Diagram of a 7-pin trailer plug showing the function and wire gauge for each pin.

Image: A detailed diagram of the 7-pin trailer plug, indicating the function and wire gauge for each of its connections.

Junction Box Protection

The junction box is equipped with rubber grommets to protect the wiring from environmental elements. Use the closed grommets for unused entry points to ensure optimal sealing.

Internal view of the junction box showing 4 closed and 4 open rubber grommets and 7 color-coded studs.

Image: An internal view of the junction box, highlighting the placement of 4 closed and 4 open rubber grommets, along with the 7 color-coded studs for wiring connections.

Cable Construction

The harness features high-quality copper wires encased in a tough rubber sleeve for durability and efficient conductivity.

Cross-section view of the trailer wiring harness showing pure copper wires wrapped in a high-quality rubber sleeve.

Image: A cross-section view of the trailer wiring harness, illustrating the pure copper wires protected by a high-quality rubber sleeve.

Operating Instructions

Once the wiring harness is correctly installed and connected to both the towing vehicle and the trailer:

  1. Ensure all connections are secure and free from debris.
  2. Test all trailer lights (running lights, brake lights, turn signals) and the electric brake function before each trip.
  3. Confirm that the 7-pin plug is fully inserted into the vehicle's receptacle and the locking mechanism (if present) is engaged.

Maintenance

Regular maintenance helps ensure the longevity and reliable performance of your wiring harness:

  • Inspect Connections: Periodically check the 7-pin plug and junction box connections for corrosion, loose wires, or damage.
  • Clean Contacts: Keep the electrical contacts of the 7-pin plug clean and free of dirt or grease. Use a dielectric grease for added protection against moisture and corrosion.
  • Check Cable Integrity: Examine the entire length of the cable for any cuts, abrasions, or signs of wear. Replace the harness if significant damage is found.
  • Grommet Inspection: Ensure all rubber grommets on the junction box are properly seated and intact to maintain weatherproof sealing.

Troubleshooting

If you experience issues with your trailer's electrical system, consider the following troubleshooting steps:

  • No Lights/Signals:
    • Check the connection of the 7-pin plug to the towing vehicle. Ensure it is fully seated.
    • Inspect the wiring inside the junction box for loose or corroded connections.
    • Verify the towing vehicle's fuses related to trailer lighting.
    • Ensure the trailer's bulbs are functional and properly installed.
  • Incorrect Light Function (e.g., brake light activates turn signal):
    • Re-verify all wiring connections in the junction box against the provided wiring diagram in this manual. Incorrect wire pairing is a common cause.
    • Confirm that the towing vehicle's wiring matches standard functions or has been correctly adapted.
  • No Electric Brakes:
    • Check the blue wire connection for the electric brake in the junction box and at the 7-pin plug.
    • Ensure your towing vehicle's brake controller is properly installed and functioning.

Specifications

AttributeDetail
BrandAgrieyes
Model NumberAG-CT018
MaterialABS, Copper, Rubber
Item Weight3.2 Pounds
Connector Type7 Way Trailer Plug
Recommended UsesPlug and Play for RVs, Trailers, Campers, Caravans, Food Trucks, Towing Vehicles
Cord Length8 ft
Junction Box DimensionsApprox. 6.7" L x 3.3" W x 2.3" H
Plug DimensionsApprox. 1.6" Diameter
Diagram showing the dimensions of the Agrieyes 7-pin trailer wiring harness junction box and plug.

Image: A diagram illustrating the key dimensions of the Agrieyes 7-pin trailer wiring harness, including the junction box and the plug.

Warranty and Support

Agrieyes offers a one-year warranty for this product. If you encounter any problems during use, please contact us. We are committed to resolving issues within 24 hours.

For support, please refer to the contact information provided with your purchase or visit the official Agrieyes store on Amazon.

Seller: Agrieyes Direct

© 2025 Agrieyes. All rights reserved.

Related Documents - AG-CT018

Preview Agrieyes C602 Wireless Dump Trailer Remote Controller User Manual
User manual for the Agrieyes C602 Wireless Dump Trailer Remote Controller. Covers pairing, installation, wiring, specifications, and operation for 915 MHz remote control systems.
Preview SKODA Ibiza Towbar Electric Wiring Kit Installation Guide
Detailed installation instructions for the SKODA Ibiza electric wiring kit (No. 29500598) for towbars, covering models from 08/15 to 05/17. Includes guidance for CFC9 and CFC7 modules, wiring diagrams, and coding procedures.
Preview SEAT 19500602 Electric Wiring Kit for Towbars Installation Guide
Detailed installation instructions for the SEAT 19500602 electric wiring kit for 7-pin towbars, compatible with the SEAT Tarraco model from 01/19 onwards. Includes wiring diagrams, component lists, and important warnings.
Preview Mitsubishi L200 Double Cab (2003-2019) 7-Pin Wiring Kit Installation Guide
Comprehensive installation instructions for the ConWys AG 7-pin electric wiring kit designed for the Mitsubishi L200 Double Cab (models from March 2010 to July 2019). This guide provides detailed steps, symbol explanations, wire color codes, and troubleshooting tips for professional installation.
Preview RectorSeal AquaGuard AG-3180E Installation Instructions and Warranty
Comprehensive installation guide and warranty information for the RectorSeal AquaGuard AG-3180E, a safety switch designed to prevent HVAC system overflow by shutting off the unit when condensate accumulates. Includes safety warnings, wiring diagrams, and warranty terms.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.