Ufesa Alpha Ceramic 2000W Flat Ceramic Heater User Manual

1. Safety Instructions

Please read all safety instructions carefully before using the Ufesa Alpha Ceramic heater. Failure to follow these instructions may result in electric shock, fire, or injury.

• Electrical Safety: Ensure the voltage indicated on the rating label matches your mains supply. Do not operate the heater with a damaged cord or plug. Do not immerse the heater in water or other liquids.
• Overheat Protection: The heater is equipped with an automatic overheat protection system. If the heater overheats, it will automatically shut off. Unplug the unit, allow it to cool down for 30 minutes, and remove any obstructions before restarting.
• Placement: Always place the heater on a stable, flat, and heat-resistant surface. Maintain a safe distance from walls, furniture, curtains, and other flammable materials (at least 1 meter). Do not cover the heater.
• Ventilation: Ensure adequate ventilation around the heater. Do not block the air inlet or outlet grilles.
• Moisture: Do not use the heater in bathrooms, laundry areas, or similar damp indoor locations. Avoid direct contact with water or high humidity.
• Children and Pets: Keep the heater out of reach of children and pets. Do not leave the heater unattended when in operation.
• Moving the Unit: Always use the integrated carry handle when moving the heater. Ensure the unit is unplugged and cool before moving.
• Maintenance: Unplug the heater before cleaning or performing any maintenance.

2. Product Overview

The Ufesa Alpha Ceramic heater is a compact and efficient heating solution, featuring ceramic technology for rapid and even heat distribution. It includes an adjustable thermostat and multiple power settings, including a fan-only mode for year-round use.

Key Features:

• 2000W Power: Provides quick and effective heating for small to medium-sized rooms.
• Ceramic Heating Element: Ensures efficient and consistent heat without drying the air.
• 3 Power Levels: Two heating modes (low and high) and a fan-only mode.
• Adjustable Thermostat: Allows precise temperature control for personalized comfort.
• Compact and Portable Design: Flat design with an integrated carry handle for easy transport and space optimization.
• Overheat Protection: Automatic shut-off for enhanced safety.

Components:

1. Power Indicator Light
2. Thermostat Control Knob (MIN/MAX)
3. Function/Power Selector Knob (OFF, Fan, Low Heat, High Heat)
4. Air Outlet Grille
5. Air Inlet Grille (rear)
6. Integrated Carry Handle

Figure 1: Front view of the Ufesa Alpha Ceramic heater, showing the main air outlet and brand logo.

Figure 2: Side view illustrating the thermostat control knob (MIN/MAX) and the function/power selector knob (OFF, Fan, Low Heat, High Heat).

3. Setup

1. Unpack: Carefully remove the heater from its packaging. Retain the packaging for future storage or transport.
2. Placement: Place the heater on a firm, level, and stable surface. Ensure it is at least 1 meter (3 feet) away from any walls, furniture, curtains, or other flammable materials. Do not place it directly under a power outlet.
3. Power Connection: Ensure the heater is switched to the "OFF" position (0 on the function selector knob) before plugging it into a suitable electrical outlet.

4. Operating Instructions

Follow these steps to operate your Ufesa Alpha Ceramic heater:

1. Power On: Plug the heater into a grounded electrical outlet. The power indicator light will illuminate when the unit is receiving power.
2. Select Function/Power Level: Use the Function/Power Selector Knob (refer to Figure 2) to choose your desired mode:
   • 0 (OFF): Turns the heater off.
   • Fan Only: Activates the fan without heat, useful for air circulation.
   • I (Low Heat): Provides heating at a lower power output (e.g., 1000W).
   • II (High Heat): Provides heating at the maximum power output (2000W).
3. Set Thermostat: Rotate the Thermostat Control Knob (refer to Figure 2) to your desired temperature setting.
   • Turn the knob clockwise towards "MAX" for higher temperatures.
   • Turn the knob counter-clockwise towards "MIN" for lower temperatures.
   • The heater will cycle on and off to maintain the set temperature.
4. Power Off: To turn off the heater, rotate the Function/Power Selector Knob to the "0" (OFF) position. Unplug the heater from the wall outlet when not in use.

5. Maintenance

Regular cleaning and proper storage will ensure the longevity and efficient operation of your heater.

• Cleaning:
  1. Always unplug the heater and allow it to cool completely before cleaning.
  2. Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  3. Use a vacuum cleaner with a brush attachment to gently clean dust from the air inlet and outlet grilles.
  4. Ensure no water enters the interior of the heater.
• Storage:
  1. When not in use, store the heater in a cool, dry place.
  2. It is recommended to store the heater in its original packaging to protect it from dust and damage.

Figure 3: Rear view of the heater, showing the air inlet grille. Keep this area clear of dust and obstructions for optimal performance.

6. Troubleshooting

If you encounter issues with your Ufesa Alpha Ceramic heater, refer to the following table:

7. Specifications

8. Warranty and Support

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Ufesa website. Keep your proof of purchase for any warranty claims.

Ufesa Official Website: www.ufesa.es

For direct support, please contact Ufesa customer service through their website or the contact details provided in your product packaging.