Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your FLEXISPOT E6 Electric Height Adjustable Standing Desk. Please read this manual thoroughly before assembly and use to ensure proper function and safety. Keep this manual for future reference.
Image: The FLEXISPOT E6 standing desk in a home office setting.
Safety Information
To prevent injury or damage to the desk, please observe the following safety guidelines:
- Always ensure the desk is properly assembled and stable before use.
- Do not exceed the maximum weight limit of 220 lbs (100 kg).
- Keep the work area clear of obstacles to prevent accidents during height adjustment.
- Always use both hands when adjusting the desk height to maintain stability.
- Never leave children unattended near the desk.
- Ensure all cables are properly managed to avoid entanglement during movement.
- Avoid placing liquids directly on the control panel or near electrical components.
Image: Anti-collision system diagram.
Setup and Assembly
Follow these steps to assemble your FLEXISPOT E6 standing desk. It is recommended to have assistance for certain steps due to the weight of components.
1. Unpack Components
Carefully unpack all components and verify against the parts list provided in your packaging. Ensure all parts are present and undamaged.
2. Assemble the Frame
Begin by assembling the crossbeams and pedestals. Ensure screws are aligned with square holes in the cross member and pressed tightly. Pre-tighten all screws for installing the cross beams, then tighten them simultaneously.
Video: FLEXISPOT E6 Essential Standing Desk Installation Guide. This video demonstrates the step-by-step assembly process for the desk frame and desktop attachment.
3. Attach the Desktop
Carefully place the desktop upside down on a soft, clean surface. Position the assembled frame onto the desktop, ensuring proper alignment. The distance between the supporting bracket and the edge of the tabletop should not exceed 200mm. Secure the frame to the desktop using the provided screws. Use a drill for efficiency, but ensure not to overtighten.
Image: The assembled desk with a light wood top and white frame.
4. Install Keypad and Cable Management
Attach the intelligent keypad to the underside of the desktop. Ensure the keypad is on the same side as the adapter bracket and its curved edge is flush with the edge of the table top. Connect all necessary cables (AC power cable, power adaptor, extension cord) to the control box and motors. Utilize the cable clips for organized cable management.
Image: Close-up of the intelligent keypad for height adjustment.
Operating Instructions
Your FLEXISPOT E6 desk features a dual-motor system for smooth and quiet height adjustments.
Height Adjustment
- Use the Up and Down arrows on the keypad to manually adjust the desk height.
- The LED display panel will show the current height.
Memory Presets
The keypad includes four memorizable height settings for convenience:
- Adjust the desk to your desired height using the Up/Down arrows.
- Press the M button (or similar memory set button) followed by a number button (1, 2, 3, or 4) to save the current height to that preset.
- To recall a saved height, simply press the corresponding number button.
Image: Illustration of the desk's height adjustment range.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your standing desk.
- Cleaning: Wipe the desktop and frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Cable Management: Periodically check and reorganize cables to prevent tangling or damage, especially after moving the desk.
- Screw Tightness: Occasionally check all screws and bolts to ensure they are securely tightened. Retighten if necessary.
- Weight Distribution: Distribute weight evenly across the desktop to prevent strain on the motors and frame.
Troubleshooting
If you encounter issues with your FLEXISPOT E6 desk, refer to the following common solutions:
- Desk Not Moving: Check all power connections. Ensure the power adapter is securely plugged into both the wall outlet and the control box.
- Uneven Movement: Perform a reset procedure (refer to the specific reset instructions in your packaged manual, as procedures can vary). Ensure no obstacles are impeding movement.
- Error Codes: If an error code appears on the LED display, consult the full product manual for specific code meanings and solutions.
- Noise During Operation: A slight hum is normal for dual motors. Excessive or unusual noise may indicate loose components; check all connections and screws.
For persistent issues, please contact FLEXISPOT customer support.
Specifications
Key specifications for the FLEXISPOT E6 Electric Height Adjustable Standing Desk:
| Feature | Detail |
|---|---|
| Brand | FLEXISPOT |
| Model Number | E6 |
| Desktop Material | Rubber Solid Wood (FSC-Certified) |
| Frame Material | Metal |
| Product Dimensions (D x W x H) | 55.1" x 23.6" x 23.6" (at minimum height) |
| Desktop Size | 55"x24" (Whole-piece) |
| Minimum Height | 23.6 inches |
| Maximum Height | 48.8 inches |
| Maximum Weight Capacity | 220 lbs |
| Motor Type | Dual Motors |
| Noise Level | Less than 45dB |
| Control Panel | Intelligent Keypad with LED Display and 4 Memory Presets |
| Special Features | Anti-collision system, Finger Joint Design |
| Assembly Required | Yes |
| Tools Recommended for Assembly | Screwdriver |
Image: Desk illustrating its 220 lbs maximum load capacity.
Warranty and Support
FLEXISPOT provides comprehensive warranty coverage for your peace of mind:
- 5-Year Coverage: Applies to the desk frame and motors.
- 2-Year Coverage: Applies to the control panel and electronics.
For any assistance, warranty claims, or product inquiries, please contact FLEXISPOT customer support. You can find contact information on the official FLEXISPOT website or through your purchase platform.
Returnable until January 31, 2026.
