Genericzof8p6rs1h-11

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Generic Electric Foot File IPX7 Callus Remover User Manual

Model: Genericzof8p6rs1h-11

1. Introduction

This manual provides essential information for the safe and effective operation, maintenance, and care of your Generic Electric Foot File IPX7 Callus Remover. Please read this manual thoroughly before first use and keep it for future reference.

2. Safety Warnings

Important Safety Information:

  • For external use only.
  • Avoid contact with eyes.
  • Keep away from flames or heat sources.
  • Do not use on broken, irritated, or infected skin.
  • Consult a doctor before use if you have diabetes, poor circulation, or skin conditions.
  • Keep out of reach of children.
  • The device will automatically stop if too much pressure is applied to prevent skin damage.

3. Package Contents

Verify that all items are present in the package:

  • 1 x Electric Callus Remover
  • 2 x Replacement Grinding Heads
  • 1 x Cleaning Brush
  • 1 x USB Charging Cable
  • 1 x Instruction Manual
Electric Callus Remover and accessories including two grinding heads, a cleaning brush, and a USB charging cable.
Image: Contents of the package, showing the electric foot file, two replacement grinding heads, a cleaning brush, and a USB charging cable.

4. Product Features

  • Powerful Motor: Equipped with a 5W motor and 3 adjustable speeds for efficient dead skin and callus removal.
  • Complete Accessories: Includes two replacement grinding heads for various needs.
  • Cordless Operation: Built-in 1200mAh battery for long-lasting wireless use.
  • LCD Display: Shows gear status and battery level, prompting timely charging.
  • IPX7 Waterproof: Allows for both dry and wet use.
  • Safety Design: Enhanced gravity sensor stops grinding after 5 seconds of strong pressure to prevent skin damage.
Before and after use comparison of feet, showing rough skin before and smooth skin after using the callus remover.
Image: Visual comparison of foot skin before and after using the electric callus remover.

5. Setup

5.1 Charging the Device

Before first use, fully charge the device. Connect the USB charging cable to the charging port on the device and to a suitable USB power adapter (not included).

Close-up of the charging port located at the bottom of the electric foot file.
Image: Detail of the USB charging port on the device.

The LCD screen will indicate the battery status. A full charge typically takes approximately 2 hours and provides up to 120 minutes of use.

5.2 Attaching/Replacing Grinding Heads

Ensure the device is turned off before attaching or replacing grinding heads. Align the grinding head with the slot on the device and press firmly until it clicks into place. To remove, press the release button (if present) and pull the head off.

Close-up of the grinding head attached to the electric foot file.
Image: Close-up view of the grinding head assembly on the device.

6. Operating Instructions

Follow these steps for safe and effective use:

  1. Turn On: Briefly press the power button to turn on the device.
  2. Adjust Speed: After turning on, briefly press the power button again to cycle through the 3 adjustable speeds. The LCD screen will display the current speed setting.
  3. Application: Gently glide the grinding head over the hardened skin or calluses on your feet. Do not apply excessive pressure; the device has a safety feature that will stop it if too much pressure is detected.
  4. Turn Off: Briefly press the power button a fourth time to turn off the device.
The electric foot file showing the power button and grinding head.
Image: The electric foot file, highlighting the power button for operation.

Tip: For best results, use on clean, dry feet. The IPX7 waterproof rating allows for use in the shower, but ensure the charging port cover is securely closed.

7. Maintenance

7.1 Cleaning the Device

After each use, turn off the device and remove the grinding head. Use the provided cleaning brush to remove any dead skin particles from the grinding head and the device. The device is IPX7 waterproof, so you can rinse the grinding head and the device body under running water. Ensure the device is completely dry before storing or recharging.

7.2 Storage

Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it out of reach of children.

7.3 Grinding Head Replacement

Grinding heads should be replaced when they show signs of wear or become less effective. Replacement heads are available separately.

8. Troubleshooting

  • Device not turning on: Ensure the device is fully charged. If the battery is low, connect it to the charger.
  • Grinding head not rotating: Check if the grinding head is correctly attached. Ensure there are no obstructions.
  • Device stops during use: This is likely the safety feature activating due to excessive pressure. Reduce pressure on the skin.
  • Reduced effectiveness: The grinding head may be worn out. Replace it with a new one.

9. Specifications

FeatureSpecification
Item TypeElectric Callus Remover
MaterialABS, Sanding Stone, Alloy
Battery TypeBuilt-in 1200mAh Lithium Battery
Battery Life120 minutes
Input Voltage5V
Power5W
Waterproof RatingIPX7
Model NumberGenericzof8p6rs1h-11
Product Weight314 Grams
Package Dimensions21 x 14 x 6 cm

10. Warranty Information

This product comes with a standard manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions. Keep your proof of purchase for any warranty claims.

11. Customer Support

If you have any questions, concerns, or require assistance with your Electric Foot File, please contact your retailer or the manufacturer's customer support. Contact information can typically be found on the product packaging or the retailer's website.

© 2023 Generic. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.