Instruction Manual

Introduction

This manual provides essential information for the safe and efficient operation of your Simple Designs 12.75" Mushroom Magic Disc Dimming & Rechargeable Cordless 4-Way Touch Sensor Stick Desk Lamp. Please read these instructions thoroughly before use and retain them for future reference.

The lamp features a sleek disc-shaped top and a modern stick base, combining functionality with a minimalist design. Its 4-way touch sensor technology allows for easy adjustment of light intensity to suit various environments and moods.

Safety Information

• Ensure the lamp is placed on a stable, flat surface to prevent tipping.
• Do not expose the lamp to water or excessive moisture. This product is designed for indoor use only.
• Keep the lamp away from heat sources, direct sunlight, and flammable materials.
• Use only the provided or recommended charging adapter and cable.
• Do not attempt to disassemble, repair, or modify the lamp. Refer all servicing to qualified personnel.
• Keep out of reach of children and pets.
• Unplug the lamp from the power source before cleaning.

Package Contents

Verify that all items are present in the package:

• 1 x Simple Designs 12.75" Mushroom Magic Disc Dimming & Rechargeable Cordless 4-Way Touch Sensor Stick Desk Lamp
• 1 x USB Charging Cable
• 1 x Adapter
• 1 x CR5 Battery (pre-installed)

Product Features

• 4-Way Touch Sensor: Easily cycle through 4 adjustable brightness levels with a simple tap.
• Rechargeable & Cordless: Built-in rechargeable battery for convenient portability.
• Compact & Versatile: Small size and lightweight design suitable for various spaces.
• Durable Metal Construction: Sleek, modern look built to last.
• Multiple Light Temperatures: Warm White (3000K), Cool White (6000K), Natural White (4000K).

Setup

1. Unpacking: Carefully remove all components from the packaging. Retain packaging for future storage or transport.
2. Initial Charge: Before first use, fully charge the lamp. Locate the USB charging port on the base of the lamp. Connect the provided USB charging cable to the lamp and then to the adapter. Plug the adapter into a standard wall outlet.
   

   Figure 1: USB charging port located at the base of the lamp.

3. Placement: Place the lamp on a stable, flat surface where desired. Its cordless design allows for flexible placement.
   

   Figure 2: The lamp positioned on a desk, showcasing its compact design.

Operating Instructions

The lamp features a touch-sensitive disc on its top for easy control of power and brightness settings.

Figure 3: The touch-sensitive disc on top of the lamp.

1. Power On/Off and Brightness Adjustment:
   • Tap the touch-sensitive disc on the top of the lamp to cycle through the light modes.
   • The sequence of modes is: Warm White (3000K) → Cool White (6000K) → Natural White (4000K) → Off.
   • Each tap will advance to the next mode.
2. Dimming Function:
   • While the lamp is on in any of the three color temperature modes, press and hold the touch-sensitive disc to continuously dim or brighten the light.
   • Release your finger when the desired brightness level is reached.

Figure 4: The Simple Designs desk lamp in operation.

Maintenance

• Cleaning: To clean the lamp, ensure it is turned off and unplugged from the power source. Use a soft, dry cloth to wipe down the surfaces. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish.
• Storage: If storing the lamp for an extended period, ensure it is fully charged and then stored in a cool, dry place.
• Battery Care: To prolong battery life, avoid completely draining the battery frequently. Recharge the lamp regularly, even if not in constant use.

Troubleshooting

Specifications

Figure 5: Lamp dimensions.

Warranty and Support

This Simple Designs product comes with a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

The warranty does not cover damage resulting from:

• Accident, misuse, abuse, or neglect.
• Unauthorized repair or modification.
• Improper installation or operation not in accordance with this manual.
• Normal wear and tear.

For warranty claims, technical support, or any inquiries regarding your product, please contact Simple Designs customer service. Please have your model number (LD1083-BLK) and proof of purchase ready when contacting support.

For more information and support, you may visit the Simple Designs Store on Amazon: Simple Designs Store