Jasion JS2 PRO Electric Scooter User Manual

1. Important Safety Information

Before operating the Jasion JS2 PRO Electric Scooter, please read this manual thoroughly and understand all safety warnings and instructions. Failure to follow these instructions may result in serious injury or property damage.

• Always wear a helmet and appropriate safety gear (knee pads, elbow pads) when riding.
• Ensure all bolts and fasteners are tightened before each ride.
• Check brake functionality before each use.
• Adhere to all local laws and regulations regarding electric scooter use.
• Do not ride in heavy rain, on slippery surfaces, or through standing water.
• Avoid riding at night without proper lighting and visibility.
• Do not perform stunts or sudden maneuvers.
• The maximum weight limit for this scooter is 220 lbs (100 kg).
• This scooter is designed for adult use.

2. Product Overview

The Jasion JS2 PRO Electric Scooter features a robust design for urban commuting, equipped with a powerful motor, long-range battery, and safety features.

Key Components

• Handlebar and Display: Features a clear LED dashboard for speed, battery level, and mode indication.
• Motor: 750W peak brushless motor for efficient performance.
• Battery: High-capacity 360Wh battery for extended range.
• Tires: 10-inch solid tires for durability and adaptability to various road conditions.
• Braking System: Dual braking system (disc brake and electric brake) for reliable stopping power.
• Lighting System: Bright headlight and LED taillight for visibility.
• Shock Absorption: Rear shock absorber for a comfortable ride.
• Folding Mechanism: Easy 3-step folding for portability and storage.

Figure 2.1: Full view of the Jasion JS2 PRO Electric Scooter.

Figure 2.2: Illustration of the 750W brushless motor and drivetrain components.

Figure 2.3: Close-up of the handlebar with integrated LED display showing speed modes.

Figure 2.4: Visual representation of the dual braking system, including mechanical drum brake and rear electronic brake.

Figure 2.5: The scooter's front headlight and rear taillight for enhanced visibility.

Figure 2.6: Detail of the rear shock absorption system for a smoother ride.

3. Assembly and Initial Setup

The Jasion JS2 PRO Electric Scooter comes largely pre-assembled. Follow these steps for final assembly and initial checks.

3.1 Unfolding the Scooter

1. Place the scooter on a flat surface.
2. Release the folding latch mechanism.
3. Carefully lift the handlebar stem until it locks into the upright position. Ensure the locking mechanism is securely engaged.
4. Adjust the handlebar height if applicable and secure it.

Figure 3.1: Visual guide for the 3-step folding and unfolding process.

3.2 Initial Checks

• Verify that both tires are properly inflated (if applicable, for solid tires ensure they are free from damage).
• Test the brakes to ensure they respond effectively.
• Confirm the headlight and taillight are functional.
• Ensure all visible cables are securely connected and not pinched.

4. Charging the Battery

The scooter is equipped with a 360Wh high-capacity battery. Proper charging ensures optimal performance and battery longevity.

• Locate the charging port on the scooter.
• Connect the charger to the scooter's charging port, then plug the charger into a standard power outlet.
• The charging indicator on the charger will typically show red during charging and turn green when fully charged.
• Charging time is approximately 5-6 hours for a full charge.
• Do not overcharge the battery. Disconnect the charger once charging is complete.
• Only use the official charger provided with your Jasion JS2 PRO scooter.

Figure 4.1: Illustration showing the 22-mile maximum range and 36V 10Ah battery.

5. Operating Instructions

Familiarize yourself with the controls and riding modes before your first ride.

5.1 Power On/Off

• To power on, press and hold the power button on the display for a few seconds.
• To power off, press and hold the power button again until the display turns off.

5.2 Speed Settings

The JS2 PRO offers 3 speed modes. Press the mode button to cycle through them:

• Mode 1: Low speed (e.g., 4 MPH / 6 km/h) for beginners or crowded areas.
• Mode 2: Medium speed (e.g., 9 MPH / 15 km/h) for balanced riding.
• Mode 3: High speed (up to 20 MPH / 32 km/h) for experienced riders on open paths.

Figure 5.1: The handlebar display indicating the three available speed modes.

5.3 Riding the Scooter

• Non-Zero Start: For safety, the scooter requires a slight push-off to initiate movement. Once the speed exceeds 1.8 MPH (3 km/h), you can use the accelerator to control the scooter's speed.
• Use the accelerator lever on the right handlebar to increase speed.
• Apply the brake lever on the left handlebar to slow down or stop.
• Maintain a balanced posture and keep both hands on the handlebars while riding.

5.4 Smart App Integration

The Jasion JS2 PRO can connect to a smart app for personalized riding experience and additional features. Refer to the app's instructions for pairing and usage.

Figure 5.2: Example of the smart app interface for managing scooter settings.

6. Maintenance

Regular maintenance ensures the longevity and safe operation of your scooter.

6.1 Cleaning

• Wipe the scooter with a damp cloth. Do not use high-pressure water jets or corrosive cleaning agents.
• Ensure the charging port cover is closed to prevent water ingress.

6.2 Tire Care

• The scooter uses 10-inch solid tires, which are puncture-resistant and require minimal maintenance.
• Regularly inspect tires for any signs of wear, cracks, or damage.

6.3 Brake System

• Periodically check the brake levers and cables for proper tension and responsiveness.
• Ensure the disc brake and electronic brake are functioning correctly. If you notice reduced braking performance, consult a qualified technician.

6.4 Storage

• Store the scooter in a cool, dry place away from direct sunlight and extreme temperatures.
• If storing for an extended period, ensure the battery is charged to approximately 50-70% and recharge it every 30-60 days to prevent deep discharge.

7. Troubleshooting

This section addresses common issues you might encounter with your Jasion JS2 PRO Electric Scooter.

If you encounter an issue not listed here or if the suggested solutions do not resolve the problem, please contact Jasion customer support.

8. Specifications

Detailed technical specifications for the Jasion JS2 PRO Electric Scooter.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Jasion website. Keep your purchase receipt as proof of purchase for warranty claims.

Manufacturer Contact Information: Jasion