ZUCWO ZS11

ZUCWO 7 Inch Wireless CarPlay Screen User Manual

Model: ZS11

1. Introduction

Thank you for choosing the ZUCWO 7 Inch Wireless CarPlay Screen. This portable car stereo system is designed to enhance your driving experience by integrating your smartphone's features directly into your vehicle. With support for wireless Apple CarPlay and Android Auto, voice control, GPS navigation, and a backup camera, this device offers convenience and safety on the road.

ZUCWO 7 Inch Wireless CarPlay Screen displaying the CarPlay interface with app icons for Phone, Music, Maps, Messages, Now Playing, Home, Podcasts, and Audiobooks.

The ZUCWO 7 Inch Wireless CarPlay Screen with its intuitive interface.

2. What's in the Box

Please check the package contents to ensure all items are present:

  • 7 Inch Wireless CarPlay Screen Unit
  • Rear Camera (Backup Camera)
  • Type-C Car Charger
  • User Manual (this document)
  • Adhesive Bracket
  • AUX Cable
Diagram showing all included components: Rear Camera, Car Screen, Type-C Car Charger, User Manual, Adhesive Bracket, and AUX Cable.

All components included in the ZUCWO 7 Inch Wireless CarPlay Screen package.

3. Setup and Installation

3.1 Main Unit Installation

  1. Choose a suitable location on your dashboard console for the CarPlay screen. Ensure it does not obstruct your view or interfere with vehicle controls.
  2. Clean the dashboard surface thoroughly where the adhesive bracket will be placed.
  3. Attach the adhesive bracket to the back of the CarPlay screen unit.
  4. Peel off the protective film from the adhesive bracket and firmly press the unit onto the chosen dashboard location. Hold for a few seconds to ensure a secure bond.
  5. Connect the Type-C Car Charger to the CarPlay screen and plug the other end into your vehicle's 12V power outlet (cigarette lighter socket).

3.2 Rear Camera Installation

The included 1080P waterproof backup camera enhances safety during parking and reversing.

Diagram showing the HD Backup Camera with features like waterproof, high definition, and 170-degree wide angle, along with a simulated view of the camera feed with parking lines.

Features of the HD Backup Camera.

  1. Mount the backup camera at the rear of your vehicle, typically above the license plate or near the trunk handle. Ensure it has a clear, unobstructed view.
  2. Route the camera cable from the rear of the vehicle to the CarPlay screen unit.
  3. Plug the rear camera cable into the AV IN interface on the CarPlay screen.
  4. For automatic display when reversing, connect the camera's power wire to your vehicle's reverse light power supply. Consult a professional if unsure about wiring.
Diagram illustrating the rear camera installation process, showing the screen connected to the car's power source and the rear camera cable plugged into the AV IN interface.

Steps for installing the rear camera.

4. Operating Instructions

4.1 Wireless CarPlay Connection

  1. On the CarPlay screen, switch to CarPlay mode.
  2. On your iPhone, go to Settings > Bluetooth and ensure Bluetooth and Wi-Fi are turned on.
  3. Select the Bluetooth device named "AVVLETxxxx" (the last four digits will vary) from the list of available devices on your iPhone.
  4. Confirm the pairing request on both your iPhone and the CarPlay screen. Once paired, CarPlay will automatically launch.
Step-by-step visual guide for connecting to Apple CarPlay, showing screen prompts and phone settings.

Connecting your iPhone to the CarPlay screen.

4.2 Wireless Android Auto Connection

  1. On the CarPlay screen, switch to Android Auto mode.
  2. On your Android phone, go to Settings > Bluetooth and ensure Bluetooth and Wi-Fi are turned on.
  3. Select the device named "AVVLETxxxx" (the last four digits will vary) from the list of available devices on your Android phone.
  4. Confirm the pairing request on both your Android phone and the CarPlay screen. Once paired, Android Auto will automatically launch.
Step-by-step visual guide for connecting to Android Auto, showing screen prompts and phone settings.

Connecting your Android phone to the CarPlay screen.

4.3 Voice Control (Siri/Google Assistant)

Once connected to CarPlay or Android Auto, you can use voice commands for hands-free operation. Simply activate Siri or Google Assistant through the screen or your phone's voice command button.

  • Say "Hey Siri" or "Hey Google" to activate the voice assistant.
  • Give commands such as "Play music," "Navigate home," "Send a message to [contact name]," or "Call [contact name]."
Image of a person driving and using voice commands like 'Hey Siri, play some music!' and 'Hey Google, navigate home!'

Using voice control for safe driving.

4.4 Mirror Link

The Mirror Link function allows you to display your smartphone screen directly onto the 7-inch CarPlay screen. This is useful for apps not natively supported by CarPlay or Android Auto.

  • Select the "Mirror Link" option on the CarPlay screen.
  • Follow the on-screen instructions to connect your iOS or Android device for screen mirroring.
Image showing a smartphone screen being mirrored onto the ZUCWO CarPlay screen, displaying the same content.

Mirror Link functionality in action.

4.5 Audio Output Options

The CarPlay screen offers multiple ways to output audio to your car's sound system:

  • Built-in Speaker: The unit has its own speaker for basic audio output.
  • Car Speaker via AUX: Connect the included AUX cable from the CarPlay screen's AUX output to your car's AUX input.
  • Car Speaker via FM: Tune the CarPlay screen to an unused FM frequency, then tune your car's radio to the same frequency.
  • Car Speaker via Bluetooth: Pair the CarPlay screen with your car's Bluetooth system (if available) to stream audio.
Diagram illustrating four ways of audio output: Built-in Speaker, Car Speaker via AUX, Car Speaker via FM, and Car Speaker via Bluetooth.

Various audio output methods for the CarPlay screen.

4.6 SD Card Playback

The device supports SD card playback, allowing you to view recorded videos or other media directly on the screen. (SD card not included)

  • Insert a compatible SD card into the designated slot on the CarPlay screen.
  • Navigate to the media player or video playback section on the screen to access files on the SD card.
Image showing the ZUCWO CarPlay screen displaying video playback, with smaller preview images of road scenes above it, indicating SD card support.

SD Card Playback feature.

4.7 App Control

The CarPlay screen allows for various settings and controls to be adjusted through its interface, including sound recording, speaker volume, video resolution, loop record options, and collision sensing.

Image showing the CarPlay screen mounted on a dashboard, with icons representing various app control features like sound recording, speaker volume, video resolution, loop record options, and collision sensing.

Overview of App Control features.

5. Maintenance

To ensure the longevity and optimal performance of your ZUCWO CarPlay screen, follow these maintenance guidelines:

  • Cleaning: Use a soft, lint-free cloth to gently wipe the screen and exterior. For stubborn smudges, slightly dampen the cloth with water or a screen-safe cleaner. Avoid abrasive materials or harsh chemicals.
  • Temperature: Avoid exposing the device to extreme temperatures, both hot and cold, for extended periods.
  • Moisture: Keep the unit dry. While the backup camera is waterproof, the main unit is not designed for direct water exposure.
  • Cables: Periodically check all cable connections to ensure they are secure and free from damage.

6. Troubleshooting

If you encounter issues with your ZUCWO CarPlay screen, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Screen does not power onNo power supply; Loose connection; Faulty chargerEnsure car charger is securely plugged into both the unit and the car's 12V outlet. Check if the car's 12V outlet is working. Try a different charger if available.
Cannot connect to CarPlay/Android Auto wirelesslyBluetooth/Wi-Fi off on phone; Incorrect pairing; InterferenceEnsure Bluetooth and Wi-Fi are enabled on your phone. Forget the device in your phone's Bluetooth settings and re-pair. Move closer to the unit if possible. Restart both the phone and the CarPlay screen.
No audio outputIncorrect audio output setting; Volume too low; Loose AUX cableCheck the audio output settings on the CarPlay screen (AUX, FM, Bluetooth). Increase the volume on both the screen and your car's stereo. Ensure AUX cable is fully inserted. If using FM, verify the frequency is clear and matched.
Backup camera not displayingCamera cable loose; Incorrect AV IN connection; Camera power issueCheck the connection of the backup camera cable to the AV IN port on the screen. Ensure the camera is receiving power (e.g., from reverse lights).
Screen freezes or is unresponsiveSoftware glitch; OverheatingPerform a soft reset by unplugging the power cable and plugging it back in after a few seconds. Ensure adequate ventilation around the unit.

If the problem persists after trying these solutions, please contact ZUCWO customer support for further assistance.

7. Specifications

FeatureDetail
Model Name7 Inch Wireless CarPlay Screen (ZS11)
Screen Size7 inches / 18 cm (diagonal)
Product Dimensions1.02 x 7.44 x 4.33 inches
Item Weight14.1 ounces
Connectivity TechnologyBluetooth, Wi-Fi, USB, CarPlay
Special FeaturesLoop Recording, Android Auto, App Control, Voice Control, Apple CarPlay, Mirror Link
Video Capture Resolution1080p (Backup Camera)
Mounting TypeDashboard Mount
Vehicle Service TypeCar, Truck, Tractor
ManufacturerZUCWO

8. Warranty and Support

ZUCWO provides a one-year warranty for this product. For any assistance with installation, wiring, usage, or other issues, please contact ZUCWO professional technical support.

For the latest support information and contact details, please visit the official ZUCWO store on Amazon or refer to the contact information provided with your purchase.

ZUCWO Store Link: Visit the ZUCWO Store

Related Documents - ZS11

Preview ZUCWO ZS31 Smart Screen Player User Manual
This user manual provides comprehensive instructions for the ZUCWO ZS31 Smart Screen Player. It covers product overview, composition, detailed specifications, wiring and installation guidance, interface functions like Apple CarPlay and Android Auto, DVR capabilities, Bluetooth connectivity, FM transmission, settings, and troubleshooting. Learn how to set up and use your ZS31 device effectively.
Preview ZUCWO ZC81 Wireless Adapter User Manual - Seamless CarPlay & Android Auto Integration
Official user manual for the ZUCWO ZC81 Wireless Adapter. Get step-by-step instructions for connecting Apple CarPlay and Android Auto, troubleshooting common issues, and performing firmware upgrades. Enhance your car's infotainment system.
Preview Shenzhen Yihang E-commerce Co., Ltd - Model Difference for Car Intelligent Navigation Screen
Document detailing model differences for Shenzhen Yihang E-commerce Co., Ltd's Car Intelligent Navigation Screen, including model names (ZS31, ZS11, etc.), trade name ZUCWO, and FCC ID 2BNJV-ZS31.