1. Introduction
Thank you for purchasing the Edvivi EPJ9514DG 5-Light Drum Chandelier. This manual provides essential information for safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.
Figure 1: Edvivi EPJ9514DG 5-Light Drum Chandelier
2. Important Safety Information
WARNING: RISK OF ELECTRIC SHOCK. Ensure power is turned off at the main circuit breaker or fuse box before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- This fixture is intended for indoor use only. Do not expose to moisture or water.
- Use only E12 base bulbs, not exceeding the maximum wattage specified in the specifications section.
- Do not attempt to modify the fixture. Any modifications may void the warranty and create a safety hazard.
- Handle glass and crystal components with care to prevent breakage and injury.
- Ensure the mounting surface can support the weight of the fixture.
3. Package Contents
Carefully unpack all components and inspect for any damage. Keep all packaging materials until you are satisfied with the product. If any parts are missing or damaged, contact customer support.
- Chandelier Fixture Body (with pre-attached beads)
- Ceiling Canopy
- Mounting Hardware (crossbar, mounting screws, wire nuts, ground screw)
- Adjustable Hanging Wires (3 wires, up to 131 inches each)
- Instruction Manual
4. Specifications
| Model Number | EPJ9514DG |
| Brand | Edvivi |
| Fixture Dimensions (Diameter x Height) | 17 inches x 29.5 inches |
| Ceiling Canopy Dimensions (Diameter x Height) | 5.1 inches x 1.4 inches |
| Maximum Hanging Height | 162.25 inches (with 131 inch wires) |
| Number of Lights | 5 |
| Bulb Base Type | E12 (Candelabra) |
| Power Source | Corded Electric |
| Material | Metal, Clear Beads |
| Color | Dark Gray Finish |
| Indoor/Outdoor Use | Indoor Only |
Figure 2: Chandelier Dimensions
5. Setup and Installation
Before you begin: Turn off power at the circuit breaker. Ensure you have all necessary tools (screwdriver, wire strippers, electrical tape, ladder).
- Prepare the Mounting Location: Ensure the electrical box is securely mounted to the ceiling joist and can support the fixture's weight.
- Install the Mounting Crossbar: Attach the mounting crossbar to the electrical box using the provided screws. Ensure it is flush and secure.
- Adjust Hanging Height: The chandelier hangs from three adjustable wires. Determine your desired hanging height and adjust the wires accordingly. The maximum height is 162.25 inches.
- Make Electrical Connections:
- Connect the bare copper ground wire from the fixture to the ground wire from the electrical box (usually bare copper or green) using a wire nut. Secure the ground wire to the green ground screw on the mounting crossbar.
- Connect the white (neutral) wire from the fixture to the white (neutral) wire from the electrical box using a wire nut.
- Connect the black (live) wire from the fixture to the black (live) wire from the electrical box using a wire nut.
- Ensure all wire nuts are tightly secured and wrap connections with electrical tape for added safety.
- Secure the Ceiling Canopy: Carefully push the wired fixture up towards the ceiling, tucking all wires into the electrical box. Align the ceiling canopy with the mounting crossbar and secure it with the provided screws or nuts.
- Install Light Bulbs: Screw five E12 base bulbs (not included) into the sockets. Do not exceed the maximum wattage recommended for the fixture.
- Restore Power: Turn the power back on at the circuit breaker. Test the chandelier to ensure it functions correctly.
6. Operating Instructions
The Edvivi EPJ9514DG Chandelier operates like a standard ceiling light fixture. Once installed and wired correctly, it can be controlled by a wall switch connected to the circuit. Ensure appropriate E12 bulbs are installed before operation.
- Turning On/Off: Use the wall switch connected to the fixture to turn the lights on or off.
- Bulb Replacement: Always turn off power at the circuit breaker before replacing bulbs. Allow bulbs to cool completely before touching. Screw in new E12 base bulbs.
7. Maintenance and Care
Regular cleaning will help maintain the appearance and longevity of your chandelier.
- Cleaning: Keep your Edvivi lighting fixture looking beautiful by cleaning it regularly with a dry, soft cloth or duster.
- Avoid Chemicals: Do not use harsh chemicals, abrasive cleaners, or polishing agents as they may damage the finish and beads.
- Inspection: Periodically check all connections and hanging components for tightness and wear.
Figure 3: Detailed view of the chandelier's clear beads
8. Troubleshooting
If you encounter issues with your chandelier, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not light up. | No power to the fixture. Loose wire connections. Faulty bulb. | Check circuit breaker. Ensure wall switch is on. Verify all wire connections are secure. Replace bulb. |
| Lights flicker. | Loose bulb. Loose wire connection. Incompatible dimmer switch. | Tighten bulbs. Check wire connections. Ensure dimmer switch is compatible with LED or incandescent bulbs used. |
| Humming noise from fixture. | Incompatible dimmer switch. Loose components. | Replace dimmer switch with a compatible one. Check for any loose parts within the fixture. |
If the problem persists after attempting these solutions, please contact Edvivi customer support.
9. Warranty and Support
This Edvivi chandelier is covered by a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical assistance, or missing parts, please contact Edvivi customer support through the retailer where the product was purchased or visit the official Edvivi website for contact information.
Please have your model number (EPJ9514DG) and proof of purchase ready when contacting support.
