Introduction
Thank you for choosing the HITSLAM Non-Slip Shower Mat. This manual provides essential information for the proper installation, use, maintenance, and safety of your new shower mat. Please read these instructions carefully before use to ensure optimal performance and longevity of the product.
Product Features
- Ultra Powerful Grip: Equipped with 162 high-performance suction cups for secure adhesion to smooth surfaces.
- Premium Material: Constructed from eco-friendly TPE and PP materials for durability and comfort.
- Effective Drainage Design: Slotted panels and numerous drain holes facilitate rapid water and soap residue flow.
- Customizable Size: Available in 27" x 16" (68x40cm) and 35" x 16" (90x40cm) sizes, with DIY cutting capability for a precise fit.
- Easy to Clean: Designed for simple rinsing and quick drying.
Visual representation of key product features: soft on feet, machine washable, powerful grip, quick draining, and premium quality.
Setup and Installation
- Prepare the Surface: Ensure the bathtub or shower floor is clean, smooth, and free from any textured or tiled areas. The mat will not adhere properly to uneven surfaces.
- Dampen the Surface: Lightly dampen the area where the mat will be placed. This helps create a better seal for the suction cups.
- Position the Mat: Place the HITSLAM shower mat in the desired location within your tub or shower.
- Secure Suction Cups: Firmly press down on the mat with your hands to engage all 162 suction cups. Ensure a tight seal between the mat and the smooth surface.
- Verify Adhesion: Before stepping onto the mat, gently pull on it to confirm it is securely attached and does not shift.
The HITSLAM shower mat securely placed on a shower floor, ready for use.
Overhead view demonstrating the mat's placement within a bathtub.
Usage Instructions
Once the mat is securely installed, you can use your shower or bathtub as normal. The textured surface provides enhanced grip, and the drainage holes prevent water accumulation, contributing to a safer bathing experience. The mat is designed to offer a comfortable standing surface.
Maintenance and Cleaning
To maintain the cleanliness and effectiveness of your HITSLAM shower mat:
- Rinse After Each Use: After each shower or bath, rinse the mat thoroughly under running water to remove soap residue and dirt.
- Hang to Dry: For optimal hygiene and to prevent mildew, hang the mat in a well-ventilated area to dry completely. This also helps to preserve the integrity of the material.
- Periodic Deep Cleaning: Periodically, you may wish to clean the mat with a mild soap and brush to remove any stubborn buildup. Ensure it is thoroughly rinsed and dried afterward.
The mat's design promotes easy water drainage, aiding in quick drying and cleanliness.
Safety Information
- Surface Compatibility: This mat is designed for use on clean, smooth, non-textured, and non-tiled surfaces only. Using it on textured or tiled surfaces may prevent the suction cups from adhering properly, increasing the risk of slipping.
- Secure Adhesion: Always ensure the mat is firmly secured to the surface by pressing down on it before each use.
- Avoid Bath Oils: Do not use bath oils or similar products while using the mat, as they can reduce the effectiveness of the non-slip surface and suction cups, increasing the risk of slipping.
- Children and Elderly: While designed for safety, always supervise children and assist the elderly when using the shower or bathtub.
Illustration of the non-slip surface and powerful suction cups for secure placement.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mat does not stick to the surface. | Surface is textured, tiled, or not clean. Insufficient pressure applied. | Ensure the surface is smooth and clean. Dampen the surface slightly and press firmly on the mat to engage suction cups. |
| Water pools on the mat. | Drainage holes are blocked by debris or soap residue. | Rinse the mat thoroughly after each use. Periodically clean the mat to ensure drainage holes are clear. |
| Mat feels slippery during use. | Mat not properly secured. Presence of bath oils or excessive soap. | Re-secure the mat before use. Avoid using bath oils. Rinse off excessive soap immediately. |
Specifications
- Material: Thermoplastic Rubber (TPR) and Polypropylene (PP)
- Color: Blue
- Size: 27 inches (L) x 16 inches (W) (Rectangular)
- Item Weight: 1.94 pounds
- Model Number: Bathtub mat
- Manufacturer: HITSLAM
The HITSLAM shower mat with its dimensions of 27 inches by 16 inches.
Warranty and Support
For any questions, concerns, or support needs regarding your HITSLAM shower mat, please contact HITSLAM customer service through the retailer's platform or the official HITSLAM website. Please refer to your purchase documentation for specific warranty details, as terms may vary.
