1. Product Overview
The K&F CONCEPT Camera Screen Protector provides robust protection for your camera's LCD screen. Crafted from 0.3mm 9H hardness tempered glass, it is designed to resist scratches, impacts, and daily wear. This protector maintains 99.99% high light transmittance for clear visuals and responsive touch sensitivity. It also features anti-fingerprint, waterproof, and dustproof properties.
Compatibility: This screen protector is compatible with Fujifilm XT30, XT30 II, XS10, XT20, XT10, XE3, XF10, XT100, XA1, and XA2 camera models.

Image: The K&F CONCEPT screen protector shown on a Fujifilm camera, highlighting its perfect compatibility with models like the XT30, XT30 II, XS10, XT20, XT10, XE3, XF10, XT100, XA1, XA2.

Image: Diagram illustrating the anti-fingerprint, waterproof, and dustproof features of the screen protector, acting as an invisible shield for the camera screen.
2. Package Contents
Please verify that all items are present in your package:
- Camera Screen Protector x3
- Vacuum Cleaning Cloth x1
- Application Tools x3 (includes wet wipes, dry wipes, dust removal stickers, guide stickers)
- Hot Shoe Cover x3

Image: A visual representation of the package contents, including three screen protectors, cleaning cloth, application tools, and hot shoe covers.
3. Installation Guide
Follow these steps for a bubble-free installation:
- Check Compatibility: Before starting, ensure the protective film matches your camera screen size.
- Clean Screen (Wet Wipe): Gently wipe the camera screen surface with the provided wet wipe to remove dirt and oils.
- Dry Screen (Dry Wipe): Use the dry wipe to thoroughly dry the screen surface, ensuring no moisture remains.
- Remove Dust: Use the dust removal sticker to lift any remaining dust particles. Do not press firmly to avoid leaving residue.
- Peel Backing Film: Carefully peel off the backing film from the screen protector. Avoid touching the adhesive side.
- Align and Apply: Align the screen protector with the edges of your camera screen. Once aligned, gently press the center of the protector and allow it to adhere automatically.

Image: A six-step visual guide demonstrating the installation process of the screen protector on a camera screen.
Hot Shoe Cover Installation
Simply slide the hot shoe cover into your camera's hot shoe mount until it sits securely. This protects the hot shoe from dust, moisture, and accidental impacts.
4. Operating Instructions
Once installed, the screen protector functions seamlessly with your camera's display. Its high transparency ensures that the original screen's colors and brightness are maintained without distortion. Touch sensitivity remains fully responsive, allowing for normal operation of touch-enabled camera screens.

Image: A visual comparison demonstrating the high light transmittance of the K&F CONCEPT screen protector versus a standard protector, showing true color display.

Image: A side-by-side comparison illustrating the superior HD Ultra High Clarity provided by the K&F CONCEPT screen protector, showing a clear butterfly image.
5. Maintenance
To maintain the clarity and effectiveness of your screen protector:
- Use a soft, lint-free cloth (such as the included vacuum cleaning cloth) to gently wipe the screen protector.
- For stubborn smudges, lightly dampen the cloth with water or a screen-safe cleaning solution. Avoid harsh chemicals.
- The anti-fingerprint coating helps reduce smudges, but occasional cleaning is recommended for optimal viewing.
6. Troubleshooting
Common Issues and Solutions:
- Bubbles After Installation:
- Small Bubbles: Often disappear within 24-48 hours. Gently push them towards the edge with a soft cloth.
- Large Bubbles/Dust Trapped: If a bubble persists due to trapped dust, carefully lift the nearest corner of the protector with a dust removal sticker or a piece of tape, use another dust removal sticker to remove the dust from the screen and the adhesive side of the protector, then reapply.
- Screen Protector Not Adhering Properly:
- Ensure the screen was thoroughly cleaned and dried before application. Any oil or dust can prevent proper adhesion.
- If the edges are lifting, gently press them down. If the issue persists, the protector may need to be replaced.
- Reduced Touch Sensitivity:
- Ensure the protector is correctly aligned and fully adhered.
- Clean the screen protector surface.
7. Specifications
| Brand | K&F CONCEPT |
| Model Number | KF31.122 |
| Material | Tempered Glass |
| Item Hardness | 9H |
| Clarity | 99.99% |
| Thickness | 0.3mm |
| Special Features | Touch Sensitive, Anti-Scratch, Bubble-Free, Anti-Fingerprint, Waterproof, Dustproof |
| Compatible Camera Models | Fujifilm X-A1, X-A2, X-E3, X-S10, X-T10, X-T20, X-T30, X-T30 II, XF10, XT100 |
8. Warranty and Support
For warranty information or technical support, please contact K&F CONCEPT directly through their official website or the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.