Loncaster Car Phone Holder Mount Instruction Manual

Introduction

Thank you for choosing the Loncaster Car Phone Holder Mount. This manual provides essential information for the proper setup, operation, and maintenance of your new device. Please read these instructions carefully before use to ensure optimal performance and safety.

Image: The Loncaster Car Phone Holder Mount in both black and red, securely holding smartphones displaying navigation applications on a dashboard.

Product Features

• Upgraded 360° Rotation: The horizontal rotatable design allows for a perfect viewing angle and quick switching of direction, facing either the driver or passenger.


Image: A diagram showcasing the 360-degree horizontal rotation capability of the phone holder, along with its approximate dimensions.

• Super Strong Adhesion: Equipped with a high-tech adhesive pad, the mount securely holds to flat dashboard surfaces (minimum 4.73 x 4.73 inches required) even during turns, bumps, or at higher speeds.


Image: An illustration demonstrating the strong adhesion of the phone holder, ensuring stability across various driving conditions like rough roads, high-speed turns, and speed bumps.

• All Silicone Construction: Made from soft yet high-tenacity silicone, this holder is designed for durability and stability, providing secure placement for your phone without clips or moving parts that can break.


Image: A visual comparison highlighting the Loncaster holder's soft silicone material and shockproof support, contrasting it with other holders that may scratch or drop phones.

• Easy & Efficient One-Hand Operation: Compatible with cell phones 0.23-0.47 inches thick, the mount allows for easy placement and removal of your phone with one hand, without the need for buttons, clamps, or magnets.


Image: An illustration demonstrating the ease of one-hand operation for placing and removing a phone, also showing that the charging port remains accessible.

• Washable & Reusable: The adhesive pad can be cleaned with water and air-dried to restore its stickiness, allowing the holder to be moved and reused without leaving sticky residue.

Setup Instructions

1. Choose a Flat Surface: Identify a clean, flat area on your car dashboard that is at least 4.73 x 4.73 inches to ensure proper adhesion. Ensure the surface is free from dust, oil, or moisture.
2. Prepare the Mount: Carefully peel off the protective film from the adhesive base of the phone holder. Retain this film for future storage or repositioning.
3. Attach to Dashboard: Press the holder firmly onto the chosen dashboard surface for a few seconds to ensure strong adhesion.


Image: The black Loncaster Car Phone Holder Mount positioned on a car dashboard, holding a smartphone with a navigation application.

Operating Instructions

1. Placing Your Phone: Gently slide your smartphone into the holder's slot. The silicone material will securely grip phones with a thickness between 0.23 and 0.47 inches.
2. Removing Your Phone: Simply lift your phone out of the holder with one hand.
3. Adjusting Viewing Angle: The holder features a 360° horizontal rotation. To adjust the viewing angle, gently swivel the entire mount to face the driver or passenger as needed. No clamping or tightening is required.


Image: The red Loncaster Car Phone Holder Mount on a car dashboard, holding a smartphone displaying a navigation application.

Maintenance

To maintain the strong adhesion and cleanliness of your Loncaster Car Phone Holder Mount:

• If the adhesive pad becomes dirty or loses its stickiness, gently rinse it with clean water.
• Allow the adhesive pad to air dry completely before reattaching it to any surface. Do not use cloths or abrasive materials, as this may damage the adhesive surface.
• Avoid exposing the holder to extreme temperatures for prolonged periods, as this may affect the silicone material and adhesive properties.

Troubleshooting

• Holder is not sticking to the dashboard:
  • Ensure the dashboard surface is clean, dry, and flat.
  • Clean the adhesive pad with water and allow it to air dry completely.
  • Verify the dashboard area is at least 4.73 x 4.73 inches for sufficient contact.
• Phone does not fit securely:
  • Check that your phone's thickness is within the compatible range of 0.23 to 0.47 inches.
  • Remove any bulky phone cases that might exceed the maximum thickness.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact Loncaster customer service through the retailer where the product was purchased. Please have your model number and purchase date available when contacting support.