VOLTCRAFT WB-310 Thermal Imager User Manual

1. Introduction

This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your VOLTCRAFT WB-310 Thermal Imager. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage or injury.

The VOLTCRAFT WB-310 is a compact thermal imager designed for professional applications in industrial and trade environments. It features a wide temperature measurement range and multiple color scales for versatile use. Its robust design ensures reliable performance even in challenging conditions.

2. Safety Information

Always observe the following safety precautions to prevent personal injury and damage to the device:

• Do not point the thermal imager directly at strong light sources (e.g., sun, lasers) as this may damage the sensor.
• Do not expose the device to extreme temperatures, high humidity, or corrosive environments.
• Use only the specified power adapter and accessories.
• Do not attempt to disassemble or modify the device. Refer all servicing to qualified personnel.
• Keep the device away from water and other liquids.
• Ensure proper ventilation during operation.

3. Product Overview

Familiarize yourself with the components of your VOLTCRAFT WB-310 Thermal Imager.

Front View

This image displays the front of the WB-310 thermal imager, highlighting the main thermal lens, the integrated visible light camera, and the LED illumination lights located above the lenses. A warning label is visible at the top.

Side View (Screen Side)

This image shows the side of the WB-310 thermal imager, focusing on the display screen which shows a thermal image with temperature readings. Below the screen are the navigation and power buttons, and the ergonomic handle is clearly visible.

Side View (Lens Side)

This image presents another side view of the WB-310 thermal imager, highlighting the lens assembly and the red trigger button located on the handle. The "VOLTCRAFT WB-310" branding is visible on the side casing.

Rear View

This image shows the rear view of the WB-310 thermal imager, primarily featuring the display screen and the array of control buttons beneath it. The ergonomic grip is also prominent.

1. Thermal Lens
2. Visible Light Camera
3. LED Illumination
4. Display Screen
5. Navigation Buttons (Up, Down, Left, Right, OK/Menu)
6. Power Button
7. Trigger Button
8. Micro-SD Card Slot (under protective cover)
9. USB-C Port (under protective cover)

4. Setup

4.1. Charging the Battery

The device is powered by an internal rechargeable battery. Before first use, fully charge the battery using the provided USB-C cable and a compatible power adapter.

• Connect the USB-C cable to the port on the device (usually located under a protective cover).
• Connect the other end of the cable to a USB power source (e.g., computer USB port, wall adapter).
• The charging indicator on the device will illuminate during charging and turn off when fully charged.

4.2. Inserting the Micro-SD Card

The WB-310 requires a micro-SD card (not included) to save thermal images and data. Ensure the device is powered off before inserting or removing the card.

• Locate the micro-SD card slot, typically under a protective rubber cover on the side or bottom of the device.
• Gently insert the micro-SD card with the contacts facing down until it clicks into place.
• To remove, push the card in slightly until it springs out.

5. Operating Instructions

5.1. Powering On/Off

Press and hold the Power Button (usually marked with a power symbol) for a few seconds to turn the device on or off.

5.2. Basic Measurement

1. Point the thermal imager at the object or area you wish to measure.
2. The display will show the thermal image in real-time.
3. The central spot meter will indicate the temperature at the center of the screen.
4. Press the Trigger Button to capture and save the current thermal image to the micro-SD card.

5.3. Menu Navigation

Use the Menu/OK Button to access the main menu. Use the Navigation Buttons (Up, Down, Left, Right) to scroll through options and adjust settings. Press Menu/OK again to confirm selections or exit a submenu.

5.4. Key Settings

• Emissivity: Adjust this setting based on the material being measured for accurate temperature readings. Common values are provided in the specifications section.
• Color Palettes: Select from eight available color scales (e.g., Iron, Rainbow, Black-Hot, White-Hot) to visualize temperature differences.
• Temperature Unit: Switch between Celsius (°C) and Fahrenheit (°F).
• Image Mode: Choose between thermal image, visible light image, or fusion modes (picture-in-picture, overlay) if available.

6. Maintenance

6.1. Cleaning the Device

• Wipe the device body with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• For the lens and screen, use a specialized lens cleaning cloth and solution to avoid scratches.
• Ensure the device is powered off and disconnected from any power source before cleaning.

6.2. Battery Care

• Recharge the battery regularly, even if the device is not in use, to maintain battery health.
• Avoid fully discharging the battery frequently.
• Store the device in a cool, dry place when not in use for extended periods.

6.3. Firmware Updates

Check the official VOLTCRAFT website periodically for available firmware updates. Follow the instructions provided with the update package carefully.

7. Troubleshooting

8. Specifications

9. Warranty and Support

VOLTCRAFT products are designed for reliability and performance. For warranty information and technical support, please refer to the official VOLTCRAFT website or contact your local distributor.

For further assistance, please visit the VOLTCRAFT Store on Amazon or consult the contact information provided with your product packaging.