INFURTURE H1 Plus (BH121A) Hybrid Active Noise Cancelling Headphones User Manual

1. Introduction

Thank you for choosing the INFURTURE H1 Plus Hybrid Active Noise Cancelling Headphones. This manual provides essential information for setting up, operating, and maintaining your headphones. Please read it carefully before use and retain it for future reference.

Safety Guidelines

• Do not expose the headphones to extreme temperatures, humidity, or corrosive environments.
• Avoid dropping or subjecting the headphones to strong impacts.
• Do not disassemble or modify the headphones.
• Clean the headphones with a soft, dry cloth.
• Adjust volume to a moderate level to prevent hearing damage.

2. Package Contents

Ensure all items are present in the package:

• INFURTURE H1 Plus Headphones
• USB-C Charging Cable
• 3.5mm Audio Cable
• Storage Pouch
• User Manual (this document)

3. Product Overview

Familiarize yourself with the headphone components and controls.

Figure 3.1: INFURTURE H1 Plus Headphones (Pink)

Figure 3.2: Headphone Controls and Ports

Control Layout (Refer to Figure 3.2)

1. Power Button: Press and hold to power on/off.
2. Volume Up / Next Track Button: Short press for volume up, long press for next track.
3. Multi-function Button (MFB): Play/pause, answer/end calls.
4. Volume Down / Previous Track Button: Short press for volume down, long press for previous track.
5. ANC Button: Press to activate/deactivate Active Noise Cancellation. Double-tap for EQ modes.
6. USB-C Charging Port: For charging the headphones.
7. 3.5mm Audio Jack: For wired connection.
8. LED Indicator: Displays power, pairing, and charging status.
9. Microphones: Four built-in microphones for clear calls.

4. Setup

4.1 Charging the Headphones

Before first use, fully charge the headphones.

1. Connect the USB-C charging cable to the charging port on the headphones and the other end to a USB power source (e.g., wall adapter, computer USB port).
2. The LED indicator will show charging status (e.g., red for charging, blue for fully charged).
3. A full charge typically takes approximately 1.5 hours. A 10-minute charge can provide up to 5 hours of playback.

Figure 4.1: Charging the Headphones

4.2 Bluetooth Pairing

To connect your headphones wirelessly:

1. Ensure the headphones are charged and powered off.
2. Press and hold the Power Button for approximately 3-5 seconds until the LED indicator flashes blue and red alternately, indicating pairing mode.
3. On your device (smartphone, laptop, etc.), enable Bluetooth and search for available devices.
4. Select "INFURTURE H1 Plus" from the list of devices.
5. Once connected, the LED indicator will flash blue slowly or turn solid blue.

Figure 4.2: Bluetooth Connectivity for Calls

4.3 Wired Connection

You can use the headphones in wired mode with the included 3.5mm audio cable.

1. Connect one end of the 3.5mm audio cable to the headphone's 3.5mm audio jack.
2. Connect the other end to your audio device's 3.5mm output.
3. Note: When using the 3.5mm wired mode, the headphones will power down. Functions such as Active Noise Cancellation (ANC) and volume control will not operate. To use ANC or volume controls, the headphones must be powered on and used in Bluetooth mode.

Figure 4.3: Wired Mode Connection

5. Operating Instructions

5.1 Power On/Off

• Power On: Press and hold the Power Button for 3 seconds. The LED indicator will flash blue.
• Power Off: Press and hold the Power Button for 3 seconds. The LED indicator will flash red and then turn off.

5.2 Music Playback

• Play/Pause: Short press the Multi-function Button (MFB).
• Next Track: Long press the Volume Up button.
• Previous Track: Long press the Volume Down button.
• Volume Up: Short press the Volume Up button.
• Volume Down: Short press the Volume Down button.

5.3 Call Management

• Answer/End Call: Short press the Multi-function Button (MFB).
• Reject Call: Long press the Multi-function Button (MFB).
• Activate Voice Assistant: Triple press the Multi-function Button (MFB).

5.4 Active Noise Cancellation (ANC)

The H1 Plus headphones feature Dual Feed Hybrid Active Noise Cancellation, reducing up to 28dB of ambient noise.

• Activate ANC: Press the ANC Button once. The LED indicator will turn green.
• Deactivate ANC: Press the ANC Button once again. The LED indicator will turn off.

Figure 5.1: Active Noise Cancellation Feature

5.5 EQ Modes

The headphones offer two EQ modes for different audio preferences.

• Switch EQ Mode: Double-tap the ANC Button. You can switch between Bass Mode and Vocal Mode.

Figure 5.2: EQ Mode Selection

6. Maintenance

• Cleaning: Use a soft, dry, lint-free cloth to clean the headphones. Do not use abrasive cleaners, alcohol, or chemical solvents.
• Storage: When not in use, store the headphones in the provided storage pouch to protect them from dust and scratches. Avoid storing in direct sunlight or extreme temperatures.
• Battery Care: To prolong battery life, charge the headphones at least once every three months if not used regularly.

7. Troubleshooting

8. Specifications

9. Warranty and Support

INFURTURE products are designed and manufactured to the highest quality standards. For any questions, technical support, or warranty claims, please contact INFURTURE customer service through the retailer where you purchased the product or visit the official INFURTURE website for contact information.

Please retain your proof of purchase for warranty purposes.