STEM Flying Insect Fan Trap: User Manual

Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your STEM Flying Insect Fan Trap. Please read these instructions thoroughly before using the device to ensure safe and effective indoor insect control. This device is designed to attract and trap flying insects such as mosquitoes, fruit flies, and house flies using a combination of UV light and a quiet fan, capturing them on a replaceable glue trap.

Important Safety Information

PRECAUTIONARY STATEMENTS AND INSTRUCTIONS PERTAINING TO THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS:

• Always follow basic precautions when using electrical appliances.
• Read and save these instructions for future reference.
• Close supervision is necessary when the product is used near children to reduce the risk of injury.
• The product must be handled and applied by an adult.
• Do not insert fingers or hands into the product.
• For safe use, plug the device only into properly functioning 120-volt wall outlets where the device is adequately ventilated.
• If using a GFCI outlet, test it on a regular basis.
• Do not use with extension cords, multi-plugs, or 3-prong adapters.
• Do not immerse the device in water.
• Do not use the device outdoors. It is intended for indoor use only.
• Use only the product's recommended glue traps in this device.
• KEEP OUT OF REACH OF CHILDREN AND PETS.

Package Contents

The STEM Flying Insect Fan Trap Starter Kit includes:

• 1 STEM Flying Insect Fan Trap Device
• 5 Refillable Glue Traps
• 1 Six-foot Power Cord

Setup Instructions

1. Prepare the Device: To open the device, rotate the upper part of the unit counter-clockwise.
2. Insert Glue Trap: Remove the protective film from one glue trap to expose the sticky surface. Insert the glue trap into the device, ensuring it sits flat.
3. Close the Device: Replace the upper part of the device and rotate it clockwise to securely close.
4. Power On: Plug the device into a properly functioning 120-volt indoor wall outlet.
5. Placement: Position the trap in areas where flying insects are present, such as kitchens, bathrooms, basements, near plants, pet feeding stations, dining areas, and entryways. Ensure the device is ventilated and not obstructed.

Operating Instructions

The STEM Flying Insect Fan Trap utilizes dual attraction technology, combining a discreet UV light and a quiet fan to effectively capture flying insects.

• UV Light Attraction: The integrated UV light attracts flying insects towards the device.
• Fan Capture: A quiet fan pulls the attracted insects into the device, where they are captured on the sticky glue trap.

Customizable Settings

Use the touch display on top of the device to select your preferred fan speed and set a timer.

• Fan Speed: Choose between available fan speed settings for optimal performance. The fan operates quietly.
• Timer Options: Set the device to run for 3, 8, or 12 hours, or select continuous 24/7 operation.

Maintenance

Replacing Glue Traps

The glue trap should be replaced when it is full of captured insects. This ensures continuous and effective pest control.

1. Unplug Device: Always unplug the device from the electrical outlet before performing any maintenance.
2. Open Device: Rotate the upper part of the device counter-clockwise to open it.
3. Remove Used Trap: Carefully remove the full glue trap from the base of the device.
4. Dispose: Dispose of the used glue trap in the trash.
5. Insert New Trap: Insert a fresh, insecticide-free glue trap into the device, ensuring the sticky side is exposed and it sits flat.
6. Close Device: Replace the upper part and rotate clockwise to close.
7. Plug In: Plug the device back into the electrical outlet.

Cleaning the Device

To clean the device, first remove it from the electrical outlet. Use the provided brush to remove any debris from the fan and interior surfaces.

Storage and Disposal

• Storage: Store the device and unused glue traps in a cool, dry place.
• Disposal: Unplug the cord from the device. Remove the glue trap from the base and dispose of it in the trash.

Troubleshooting

No specific troubleshooting steps are provided in the product information. If the device is not functioning as expected, ensure it is properly plugged in, the glue trap is correctly inserted, and there are no obstructions to the fan. For further assistance, please contact customer support.

Specifications

Warranty and Support

For warranty details, please visit ghseal.com.

For questions or comments, please call customer support at 800-558-5252.