Introduction
Thank you for choosing MAHANCRIS Bar Stools. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read these instructions carefully before assembly and retain them for future reference.
Image: MAHANCRIS BAHR6001 Bar Stools in a kitchen environment.
Safety Information
To ensure safe use of your bar stools, please observe the following guidelines:
- Maximum Weight Recommendation: Do not exceed a total weight of 99.8 kg (220 lbs) per stool.
- Always follow the assembly instructions carefully to ensure the stool's stability and safety.
- Keep the stool on a flat, stable surface to prevent tipping.
- Periodically check all screws and connections to ensure they remain tight.
Package Contents
Before beginning assembly, please verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- 2 x Bar Stool components
- 1 x Accessory Kit (includes screws, washers, Allen wrench)
- 1 x Instructions Manual
Image: Exploded view and dimensions of the bar stool components.
Setup and Assembly Instructions
Assembly is designed to be straightforward. Please follow these steps carefully:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Attach Backrest to Seat: Align the backrest frame with the pre-drilled holes on the underside of the seat. Secure it using the provided screws from the accessory kit. Do not fully tighten yet.
- Assemble Leg Frame: Connect the four leg pieces using the crossbars and footrest bars. Ensure all connections are aligned.
- Attach Seat to Leg Frame: Place the assembled seat onto the leg frame, aligning the mounting points. Secure with the remaining screws.
- Tighten All Screws: Once all components are loosely assembled, gradually tighten all screws using the Allen wrench until secure. Do not overtighten.
- Install Adjustable Feet: Screw the adjustable feet into the bottom of each leg. Adjust them as needed to ensure the stool is stable and level.
Image: Visual guide for bar stool assembly.
Operating Instructions
Your MAHANCRIS Bar Stools are designed for comfortable and stable seating. Here are key features and how to use them:
- Ergonomic Backrest: The curved backrest provides lumbar support, enhancing comfort during extended sitting.
- Footrest: Utilize the integrated footrest to support your legs and reduce pressure, promoting relaxation.
- Adjustable Feet: Each leg is equipped with universal adjustable feet. Rotate these feet to compensate for uneven floors, ensuring the stool remains stable and level. This also helps protect your floors from scratches.
Image: Ergonomic curved backrest for comfort.
Image: Universal adjustable feet for stability and floor protection.
Maintenance
Proper maintenance will extend the lifespan and appearance of your bar stools:
- Cleaning: The smooth engineered wood seat and metal frame can be easily cleaned with a damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Screw Tightness: Periodically (e.g., every 3-4 months) check and retighten all assembly screws to maintain structural integrity and prevent wobbling.
- Floor Protection: Ensure the adjustable feet are properly positioned and intact to protect your floors.
Image: Smooth seat panel for easy cleaning.
Troubleshooting
If you encounter any issues with your bar stools, refer to the following common solutions:
- Wobbling Stool:
- Ensure all assembly screws are fully tightened.
- Adjust the universal feet on each leg to level the stool on uneven surfaces.
- Loose Connections: If any parts feel loose, carefully retighten the corresponding screws. Avoid overtightening.
- Missing Parts: If you find any parts missing during assembly, please contact MAHANCRIS customer support immediately for assistance.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions (L x W x H) | 12.6" x 12.6" x 26" (32cm x 32cm x 66cm) |
| Color | Rustic Brown |
| Frame Material | Metal |
| Seat Material | Engineered Wood |
| Item Weight | 7.7 kg (17 lbs) per stool |
| Maximum Weight Recommendation | 99.8 kg (220 lbs) |
| Number of Pieces | 2 |
Warranty Information
MAHANCRIS products are manufactured with quality and care. For specific warranty details, please refer to the warranty card included with your purchase or contact MAHANCRIS customer support. Please retain your proof of purchase for any warranty claims.
Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact MAHANCRIS customer support through the retailer's platform or visit the official MAHANCRIS website for contact information.