Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Outfunny 2 Seater Kids Ride-On Car. Please read this manual thoroughly before assembly and use to ensure safe and proper operation of the vehicle. Keep this manual for future reference.
Safety Information
The child must use the product under adult supervision. Always ensure children wear appropriate safety gear, including helmets, when operating the vehicle. Do not operate the vehicle near streets, motor vehicles, steep inclines, swimming pools, or other bodies of water. Always use the safety belts provided. Ensure all connections are secure before each use.
What's in the Box
- Car body
- Motor
- Lead Acid Battery
- Wheels (4)
- Steering Wheel
- Seats (2)
- Remote Control
- Charger
- Assembly Hardware (screws, nuts, washers, pins)
- Suspension Components
- Roll Bar with Lights
- Side Handles
Parts Overview
This video provides a comprehensive overview of all components included in the package and demonstrates the initial unboxing process.
An overhead view of all the parts included in the box, ready for assembly.
Assembly Instructions
Follow these steps carefully to assemble your ride-on car. Refer to the assembly video for visual guidance.
- Step 1: Prepare the Chassis
Carefully remove all components from the packaging. Place the main car body upside down on a stable surface to begin assembly. (Refer to video: 0:00 - 0:03) - Step 2: Install Rear Suspension Bars
Attach the black metal rear suspension bars to the designated points on the car's chassis. Secure them using the provided bolts and nuts. (Refer to video: 0:03 - 0:33) - Step 3: Connect Rear Motors
Insert the motor assemblies into their respective slots at the rear of the vehicle. Connect the motor wires to the corresponding connectors. Ensure a secure connection. (Refer to video: 0:33 - 0:55) - Step 4: Attach Rear Wheels
Slide the rear wheels onto the motor shafts. Secure each wheel with the provided washer, nut, and decorative cap. (Refer to video: 0:55 - 1:17)
Detailed view of the rear wheel, highlighting the robust tire design.
- Step 5: Install Front Suspension Shocks
Attach the front suspension shocks to the designated mounting points on the front frame. Use the provided bolts and Allen wrenches to tighten securely. (Refer to video: 1:36 - 2:39) - Step 6: Connect Front Motors (if applicable)
For 4WD models, insert the front motor assemblies and connect their wires. Secure them in place. (Refer to video: 2:39 - 3:24) - Step 7: Attach Front Wheels
Slide the front wheels onto the axles. Secure each wheel with the provided washer, nut, and decorative cap. (Refer to video: 3:24 - 3:59)
View of the front wheel, demonstrating its attachment point.
- Step 8: Install Front Bumper/Guard
Attach the green front bumper/guard to the front of the vehicle. Secure it with screws. (Refer to video: 3:59 - 5:59) - Step 9: Install Steering Wheel
Connect the steering wheel's electrical connector to the dashboard. Align the steering wheel with the steering column and push it firmly into place until it clicks. (Refer to video: 5:59 - 6:16) - Step 10: Install Side Handles
Insert the black side handles into the designated slots on either side of the cockpit. (Refer to video: 6:16 - 6:28) - Step 11: Connect Battery
Open the battery compartment. Connect the main battery terminals (red to red, black to black/yellow). Ensure all connections are firm. (Refer to video: 6:28 - 6:55) - Step 12: Install Seats
Place the two-seater assembly into the car's interior. Secure it by screwing in the retaining screws. (Refer to video: 6:55 - 7:38) - Step 13: Install Roll Bar with Lights
Attach the roll bar with the integrated lights to the rear of the vehicle. Secure it firmly. Connect any associated wiring for the lights. (Refer to video: 7:38 - 7:54)
Operating Instructions
Driving the Vehicle
To operate the vehicle, press the foot pedal for acceleration. The steering wheel controls the direction of travel. The vehicle features a 2WD/4WD switchable function, allowing you to select the appropriate drive mode for different terrains. Use 4WD for climbing or uneven surfaces and 2WD for smoother paths to optimize battery life.
Remote Control Operation
The included 2.4G remote control allows parents to safely supervise and control the vehicle. To pair the remote, turn off the car, then press and hold the pairing button on the remote while turning on the car. Once paired, the remote can control forward, backward, and steering movements. It also features an emergency stop button for immediate halting of the vehicle.
This video demonstrates the vehicle's driving capabilities and the use of the remote control for parental supervision.
Illustration of a child driving the vehicle while a parent uses the remote control.
Multimedia Features
The vehicle is equipped with a USB interface and Bluetooth functionality, allowing you to connect your device and play music. It also features working front lights and rear searchlights for enhanced realism and visibility.
Demonstration of Bluetooth connectivity for playing music through the vehicle's sound system.
Maintenance
- Battery Charging: The vehicle is powered by a 12V 10Ah lead acid battery. Ensure the battery is fully charged before first use and after each play session. Use only the provided charger. Do not overcharge.
- Cleaning: Wipe the vehicle with a damp cloth. Avoid using harsh chemicals or abrasive cleaners. Do not spray water directly onto electrical components.
- Storage: Store the vehicle in a dry, cool place away from direct sunlight and moisture. If storing for an extended period, charge the battery fully and disconnect it. Recharge the battery every 3 months to maintain its lifespan.
- General Inspection: Regularly check all screws, nuts, and connections to ensure they are tight and secure. Inspect tires for wear and tear.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Vehicle does not move. | Battery not connected or low charge; loose wiring. | Ensure battery is properly connected. Charge the battery fully. Check all electrical connections. |
| Remote control not working. | Remote not paired; remote batteries low or dead. | Pair the remote control with the vehicle according to instructions. Replace remote control batteries. |
| Vehicle moves slowly or struggles on terrain. | Battery low; weight exceeds capacity; 2WD mode on rough terrain. | Charge battery. Ensure total load is within 110 lbs. Switch to 4WD mode for rough terrain. |
| Lights or music not working. | Loose connections; component malfunction. | Check wiring connections to the lights and multimedia unit. Ensure the battery is charged. |
Specifications
- Product Dimensions: 47.24 x 31.89 x 32.68 inches
- Item Weight: 63.9 pounds
- Manufacturer Recommended Age: 3 years and up
- Load Capacity: Up to 110 lbs
- Battery: 12V 10Ah Lead Acid
- Motors: 4 x 40W
- Speed Settings: 3 speeds (1.9-3.1 MPH)
- Drive Modes: 2WD/4WD Switchable
- Features: Remote Control, Bluetooth, USB Interface, Front Lights, Rear Searchlights, Four-wheel Shock Absorption, Three-point Safety Belt, Mesh Pocket Toolbox
Visual representation of the product dimensions and key specifications.
Warranty and Support
For warranty information, technical support, or replacement parts, please contact Outfunny customer service directly. Refer to your purchase documentation for specific contact details or visit the official Outfunny website for assistance.
