1. Introduction
This instruction manual provides essential information for the safe and effective use of your BufferABC 4.3V Replacement Charger, model A00390. This charger is specifically designed for various Philips Norelco OneBlade and other compatible shaver models, providing a stable 4.3V 70mA output. Please read this manual thoroughly before first use to ensure proper operation and to prevent damage to the charger or your device.
Important Note: This charger is designed for European charging sockets. Please verify compatibility with your local electrical outlets before use.
2. Safety Information
Adhering to the following safety guidelines is crucial for preventing injury and damage to the product:
- Before purchasing and using this charger, carefully compare its connector with your shaver's charging port and ensure your shaver model is listed as compatible.
- This charger is only suitable for European charging sockets. Ensure your socket matches the charger's plug type.
- Do not leave the charger plug loose while the shaver is connected to the power supply. Ensure a secure connection.
- To prevent heat generation and potential damage, disconnect the shaver from the power supply promptly after it has finished charging. Avoid leaving the shaver connected for extended periods once fully charged.
- Keep the charger away from water and moisture. Do not use it in wet environments.
- Do not attempt to disassemble or modify the charger. Refer all servicing to qualified personnel.
- Keep out of reach of children.
3. Product Overview
The BufferABC 4.3V Replacement Charger is a compact and efficient power supply designed for specific Philips Norelco shavers. It features a durable cable and a European-standard plug.
Figure 3.1: Overview of the BufferABC 4.3V Replacement Charger, showing the European plug and the shaver-compatible connector.
The charger is designed for reliable and safe charging, ensuring your shaver receives the correct voltage and current.
Figure 3.2: The charger in use, connected to a shaver and a power outlet, demonstrating reliable and safe charging.
4. Setup
- Verify Compatibility: Before connecting, ensure your shaver model is compatible with this 4.3V charger and that its charging port matches the charger's connector. Refer to Section 6 for compatible models.
- Check Socket Type: Confirm that your electrical outlet is a European-specific socket compatible with the charger's plug.
- Connect Shaver: Insert the charger's connector firmly into the charging port of your shaver.
- Plug into Outlet: Insert the charger's plug securely into the European wall socket.
Figure 4.1: Proper setup of the charger, showing it connected to a shaver and a wall outlet.
5. Operating Instructions
Once properly set up, the charger will begin supplying power to your shaver. The charging indicator on your shaver (if present) will typically illuminate or change state to indicate charging is in progress.
- Allow your shaver to charge until its battery is full. Refer to your shaver's specific manual for typical charging times.
- Once charging is complete, disconnect the charger from the wall outlet first, then remove the connector from your shaver.
- Do not leave the shaver connected to the charger for prolonged periods after it is fully charged, as this can lead to unnecessary heat generation.
Figure 5.1: The charger in a typical home charging scenario.
6. Compatible Devices
This 4.3V 70mA shaver charger is compatible with various Philips shaver models, including but not limited to:
- Philips YQ3 Series: YQ300, YQ306, YQ308, YQ316, YQ318
- Philips QG3 Series: QG3340, QG3250
- Philips QP Series: QP2520
- Philips RQ3 Series: RQ350, RQ338, RQ330, RQ328, RQ320, RQ312, RQ311, RQ310, RQ331
- Philips S10 Series: S1010, S1060
- Philips S5 Series: S510, S511, S512, S520, S530, S531, S538, S500, S550, S551, S526, S528, S529
- Philips S3 Series: S300, S311, S301, S321, S330, S331, S360
- Philips S1 Series: S100, S101, S106, S108, S110, S111, S116, S118
Always verify the charging port shape and required voltage of your shaver before connecting.
Figure 6.1: Visual guide for shaver model compatibility and charging port shape.
7. Incompatible Devices
This 4.3V shaver power charging cable is NOT compatible with the following Philips models or any other models not explicitly listed as compatible:
- Philips HQ8505 (15V)
- Philips HQ850 (8V)
- Philips OneBlade QP2724
- Philips OneBlade QP2834
- Philips OneBlade QP2530
- Philips OneBlade QP2630
- Philips OneBlade QP6510
- Philips OneBlade QP6520
- Philips OneBlade QP6530
- Philips OneBlade QP650
- Philips OneBlade QP6505
Always check the required voltage and charging port shape of your shaver to avoid damage.
Figure 7.1: Visual comparison of charger interfaces and voltages, indicating incompatible models.
8. Specifications
| Parameter | Value |
|---|---|
| Model | A00390 Replacement Charger |
| Input Voltage | 100-240V AC, 50-60Hz |
| Output Voltage | 4.3V DC |
| Output Current | 70mA |
| Power Output | 0.3W |
| Cable Length | 3.45 ft (approx. 105 cm) |
| Material | Metal + Plastic |
| Color | Black |
| Item Weight | 2.12 ounces (approx. 60g) |
| Package Dimensions | 3.15 x 1.97 x 0.98 inches |
Figure 8.1: Detailed dimensions of the charger components.
9. Troubleshooting
- Shaver not charging:
- Ensure the charger is securely plugged into a functioning European wall socket.
- Verify that the charger's connector is fully inserted into the shaver's charging port and is not loose.
- Confirm that your shaver model is listed as compatible with this 4.3V charger (refer to Section 6). Check the required voltage and port shape.
- Inspect the charging cable for any visible damage or kinks.
- Charger or shaver getting hot during charging:
- A slight warmth is normal, but excessive heat indicates a potential issue.
- Ensure the shaver is not left connected to the charger for extended periods after it has reached full charge.
- Confirm compatibility. Using an incompatible charger or shaver can cause overheating.
- Disconnect immediately if excessive heat is detected and contact support.
- Charger not fitting into socket:
- This charger is designed for European-specific sockets. Ensure your socket type matches. Adapters may be required for other regions (not included).
10. Warranty and Support
BufferABC is committed to customer satisfaction. If you encounter any issues with your product, such as damage or unsuitability for use, please do not hesitate to contact us. Upon confirmation that the issue is related to our product, we will endeavor to provide a suitable solution within 24 hours.
For support, please refer to the contact information provided with your purchase or visit the BufferABC official website.
