Introduction
Thank you for choosing the Zerodis Stainless Steel Cat Water Fountain. This automatic circulating pet drinking fountain is designed to provide a continuous supply of fresh, filtered water for your cats, dogs, and other small pets. Constructed from durable 304 stainless steel, it ensures a safe and clean drinking source. Its quiet operation and large 3.5L capacity make it a convenient and reliable choice for pet hydration.
Image: The Zerodis Stainless Steel Cat Water Fountain, showcasing its design and a cat in the background.
Product Components
Before assembly, please ensure all components listed below are present in your package:
- 1 x Stainless Steel Fountain Body
- 1 x Wired Pump
- 1 x Water Tap (Spout)
- 1 x Stainless Steel Lid
- 1 x Filter Cotton
- 1 x Filter Core
- 1 x User Manual (this document)
Image: Top and bottom views of the stainless steel fountain body, illustrating its separate components.
Setup Instructions
Follow these steps to set up your Zerodis Cat Water Fountain:
- Clean All Components: Before first use, thoroughly wash the stainless steel fountain body, lid, water tap, and filter housing with mild soap and water. Rinse all parts completely to remove any residue.
- Assemble the Pump: Insert the wired pump into its designated slot at the bottom of the fountain body. Ensure it is securely placed.
- Install the Filter: Place the filter cotton and filter core into the filter housing. Position the assembled filter unit over the pump.
- Fill with Water: Fill the stainless steel fountain body with clean drinking water up to the maximum fill line. Do not overfill.
- Place the Lid and Tap: Place the stainless steel lid onto the fountain body. Insert the water tap (spout) into the opening on the lid, ensuring it connects properly to the pump outlet.
- Connect Power: Place the assembled fountain on a stable, level surface. Plug the wired pump into a standard electrical outlet. The fountain should begin circulating water immediately.
Image: The fully assembled Zerodis Cat Water Fountain, ready for use.
Operating Instructions
The Zerodis Cat Water Fountain is designed for continuous, automatic operation:
- Automatic Circulation: Once plugged in, the fountain will continuously circulate water, keeping it fresh and oxygenated for your pets.
- Quiet Operation: The pump is designed to operate quietly, minimizing disturbance to you and your pets. Ensure the water level is always above the pump to maintain quiet operation.
- Water Level Monitoring: Regularly check the water level. Refill the fountain when the water level is low to prevent the pump from running dry, which can shorten its lifespan and increase noise.
Image: The fountain in operation, highlighting the automatic circulation of water and its quiet design.
Maintenance Instructions
Regular cleaning and maintenance are crucial for the longevity and hygiene of your pet's water fountain:
- Daily Checks: Check the water level daily and top up as needed.
- Weekly Cleaning: Disassemble the fountain completely. Wash all stainless steel components with mild soap and water. Rinse thoroughly. The stainless steel parts are also suitable for dishwasher cleaning.
- Pump Cleaning: Clean the pump at least once a week. Disconnect the power, remove the pump, and open its casing to clean the impeller and remove any hair or debris.
- Filter Replacement: Replace the filter cotton and filter core every 2-4 weeks, or more frequently if you have multiple pets or notice reduced water flow/quality.
Image: The stainless steel pet water dispenser, indicating its compatibility with dishwashers for easy cleaning.
Troubleshooting
If you encounter issues with your Zerodis Cat Water Fountain, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fountain not dispensing water | No power; pump blocked; water level too low | Check power connection; clean pump and impeller; refill water to appropriate level |
| Weak water flow | Clogged filter; dirty pump; debris in water tap | Replace filter; clean pump thoroughly; clean water tap |
| Excessive noise from fountain | Low water level; dirty pump; pump not properly seated | Refill water; clean pump and impeller; ensure pump is securely placed in its slot |
| Water appears dirty or cloudy | Filter needs replacement; fountain needs cleaning | Replace filter; thoroughly clean all fountain components |
Specifications
- Item Type: Cat Water Fountain
- Material: 304 Stainless Steel
- Capacity: 3.5 Liters
- Dimensions: Approx. 17.8 x 10 cm (7.01 x 3.94 inches)
- Item Weight: 1.93 pounds
- Model Name: Zerodisqw2u7n4kvf
- Manufacturer: Zerodis
Warranty Information
This Zerodis Cat Water Fountain comes with a manufacturer warranty for 90 days from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, neglect, accidents, or unauthorized modifications.
Customer Support
For any questions, concerns, or technical assistance regarding your Zerodis Stainless Steel Cat Water Fountain, please contact Zerodis customer service. Refer to the contact information provided with your purchase or visit the official Zerodis website for support details.