1. Introduction
This manual provides essential instructions for the safe and efficient operation of your pecron E1000LFP Solar Generator and accompanying 2x200W Solar Panels. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Image 1.1: pecron E1000LFP Solar Generator with two 200W solar panels.
2. Safety Information
Observe the following safety precautions to prevent injury or damage to the product:
- Do not disassemble, repair, or modify the unit.
- Keep the unit away from fire and direct heat sources.
- Avoid exposure to water or high humidity.
- Do not use the unit if it is damaged or appears to be malfunctioning.
- Ensure proper ventilation during use and charging.
- Keep out of reach of children and pets.
3. Package Contents
Verify that all items are present in your package:
- pecron E1000 LFP Power Station (1 unit)
- 200W Solar Panel (2 units)
- AC Charging Cable (1 unit)
- Solar Charging Cable (1 unit)
- Car Charging Cable (1 unit)
- Accessory Bag (1 unit)
- User Manual (1 unit)
4. Setup
4.1 Initial Charging
Before first use, fully charge the pecron E1000LFP power station. Connect the AC Charging Cable to the power station's AC input port and then to a standard wall outlet. The display will indicate charging status. A full charge typically takes 1.3 hours.
Image 4.1: The pecron E1000LFP power station connected to an AC wall outlet for fast charging.
4.2 Connecting Solar Panels
To charge using solar power, unfold the 200W solar panels and position them in direct sunlight. Connect the solar panels to the power station using the provided Solar Charging Cable. The power station's display will show solar input. Charging time varies based on sunlight intensity.
Image 4.2: Various charging methods for the pecron E1000LFP, including AC, solar, and car charging.
5. Operating Instructions
5.1 Powering On/Off
Press and hold the main power button to turn the unit on or off. The LCD display will illuminate upon activation, showing battery level, input/output wattage, and port status.
5.2 Output Ports
The E1000LFP features 12 output ports to power a variety of devices:
- 5x AC Outlets (1800W total output)
- 2x USB-C Ports
- 2x USB-A Ports
- 1x XT60 Output
- 1x Cigar Port
- 1x DC 5525 Output
Press the respective AC or DC button to activate the desired output group. Connect your devices to the appropriate ports.
Image 5.1: Overview of the 12 output options available on the pecron E1000LFP.
Image 5.2: The pecron E1000LFP powering a laptop and other devices in an outdoor setting.
5.3 Expandable Capacity
The E1000LFP's capacity can be expanded up to 4096Wh by connecting an external battery (sold separately). Refer to the external battery's manual for connection instructions.
5.4 Smart App Control
Download the pecron app to monitor and control your power station remotely. The app allows you to view input/output power, check power levels, and remotely switch DC/AC outputs.
Image 5.3: The pecron mobile application providing smart control over the power station.
5.5 UPS Function
The E1000LFP features an Uninterruptible Power Supply (UPS) function, providing a seamless power transition within 8-20ms in case of a power outage when connected to an AC source.
6. Maintenance
6.1 Battery Care
The pecron E1000LFP utilizes a 1024Wh LiFePO4 battery, designed for durability with over 3500 charge cycles to retain 80% of its original capacity. For optimal battery life, avoid fully discharging the unit frequently and store it with a partial charge (50-80%).
Image 6.1: Internal view of the durable LiFePO4 battery cells within the E1000LFP.
6.2 Battery Heating
The unit includes a battery heating module that activates when charging in temperatures between -20°C and 0°C, ensuring the battery heats up above 0°C for safe and efficient charging in cold environments.
Image 6.2: The pecron E1000LFP's battery heating function for reliable cold weather performance.
6.3 Storage
When storing the power station for extended periods, ensure it is charged to approximately 50-80% and stored in a cool, dry place away from direct sunlight and extreme temperatures. Recharge every 3-6 months to prevent deep discharge.
7. Troubleshooting
If you encounter issues with your pecron E1000LFP, consider the following:
- Unit not turning on: Ensure the battery is charged. If not, connect to an AC outlet for charging.
- No output from ports: Verify that the specific output group (AC/DC) is activated. Check if the device connected requires more power than the port can supply.
- Slow charging: For solar charging, ensure panels are in direct sunlight and free from obstructions. For AC charging, confirm the cable is securely connected.
- Overload protection: If the unit shuts down, it may be due to an overload. Disconnect some devices and restart the unit.
For persistent issues, contact customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Model | E1000LFP |
| Battery Type | LiFePO4 |
| Capacity | 1024Wh |
| Expandable Capacity | Up to 4096Wh |
| AC Output | 1800W (Rated), 120V |
| Total Output Ports | 12 |
| AC Fast Charging Time | 1.3 hours |
| Solar Panel Included | 2x 200W |
| Item Weight | 29 Pounds |
| Product Dimensions | 14.9"L x 9.4"W x 10"H |
| Special Features | Portable, Fast Charging, Large Capacity, Long Last, Safety, Smart Control, UPS, Battery Heating |
9. Warranty and Support
Your pecron E1000LFP Solar Generator comes with a 2+1 year warranty, providing peace of mind for your investment. For any questions, technical assistance, or warranty claims, please contact pecron customer service. Our team is available 24 hours a day, 7 days a week to provide friendly support.
For further assistance, please visit the official pecron website or refer to the contact information provided in your warranty card.
