KitchenAid Go Cordless Hand Blender with Accessories KHBRV75 Instruction Manual

Introduction

Thank you for choosing the KitchenAid Go Cordless Hand Blender. This appliance is designed for versatility and convenience, allowing you to blend, whisk, and chop ingredients without the limitations of a power cord. This manual provides essential information for the safe and efficient operation, maintenance, and care of your new appliance.

Important Safeguards

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:

• Read all instructions before using the hand blender.
• Do not immerse the motor body or battery in water or other liquids.
• Keep hands, hair, and clothing, as well as spatulas and other utensils, away from moving blades during operation to prevent injury.
• The blending blade is sharp. Handle with care when cleaning.
• This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are supervised or have been given instruction concerning use of the appliance by a person responsible for their safety.
• Do not use outdoors.
• Ensure the battery is fully charged before first use.

What's Included

Your KitchenAid Go Cordless Hand Blender package includes the following components:

• Cordless Hand Blender Motor Body
• Removable 7-inch Blending Arm with 4-point Stainless Steel Blade
• Whisk Attachment
• Chopper Attachment
• 4-cup BPA-free Pitcher with Lid
• Removable Pan Attachment (Pan Guard)
• 12V MAX Removable Battery
• USB-C Cable
• Wall Adapter

A detailed diagram showing each component of the KitchenAid Go Cordless Hand Blender system, including the removable battery, 7-inch blending arm, pan guard, whisk attachment, chopper attachment, and BPA-free pitcher with lid.

An overhead view of the KitchenAid Go Cordless Hand Blender components, including the motor body, blending arm, whisk, chopper, measuring pitcher, battery, USB-C cable, and wall adapter.

Setup

Attaching the Battery

1. Ensure the hand blender motor body is turned off.
2. Align the battery pack with the top of the motor body.
3. Slide the battery pack onto the motor body until it clicks securely into place.

Attaching Accessories

1. Ensure the battery is removed or the appliance is off.
2. Align the desired attachment (blending arm, whisk, or chopper motor) with the bottom of the motor body.
3. Twist the attachment clockwise until it locks securely into place. To remove, twist counter-clockwise and pull apart.

Charging the Battery

The 12V MAX removable battery powers your hand blender. It is recommended to fully charge the battery before first use.

1. Remove the battery from the hand blender motor body.
2. Connect the USB-C cable to the charging port on the battery pack.
3. Plug the other end of the USB-C cable into the wall adapter, then plug the adapter into a standard electrical outlet.
4. The battery indicator lights will illuminate to show the charging status. All lights will be solid when fully charged.
5. A full charge typically takes approximately 2 hours.

Operating Instructions

General Operation

• Ensure the battery is securely attached and the desired accessory is locked into place.
• To operate, press and hold the power button. The appliance will run as long as the button is held. Release the button to stop.
• The hand blender operates at a single speed.

Using the Blending Arm

The blending arm is ideal for making smoothies, milkshakes, soups, and sauces.

1. Attach the 7-inch blending arm to the motor body.
2. For use in cookware, attach the removable pan guard to protect your pots and pans.
3. Immerse the blending arm into the ingredients. Ensure the blade guard is fully submerged to prevent splashing.
4. Press and hold the power button to blend. Move the blending arm up and down gently to ensure even blending.
5. Blend until desired consistency is achieved.

A person using the KitchenAid Go Cordless Hand Blender to efficiently blend a creamy soup directly in a cooking pot on a stovetop, demonstrating its cordless convenience.

Using the Whisk Attachment

The whisk attachment is perfect for whipping egg whites, cream, or making vinaigrettes and mayonnaise.

1. Attach the whisk attachment to the motor body.
2. Place the whisk into the ingredients in a bowl or the included pitcher.
3. Press and hold the power button to whisk. Move the whisk gently to incorporate air or mix ingredients thoroughly.

A person using the whisk attachment of the KitchenAid Go Cordless Hand Blender to mix ingredients in a clear measuring pitcher, suitable for whipping egg whites or making vinaigrettes.

Using the Chopper Attachment

The chopper attachment is suitable for chopping herbs, nuts, cheeses, and other small ingredients.

1. Place the chopper blade onto the center post inside the chopper bowl.
2. Add ingredients to the chopper bowl. Do not overfill.
3. Place the chopper motor body onto the chopper bowl, ensuring it is securely seated.
4. Press and hold the power button to chop. Use short pulses for coarse chopping or hold longer for finer results.

A person operating the chopper attachment of the KitchenAid Go Cordless Hand Blender to finely chop fresh herbs, demonstrating its use for preparing ingredients like nuts or cheeses.

Cleaning and Maintenance

Proper cleaning ensures the longevity and performance of your hand blender.

Motor Body and Battery

• Always remove the battery before cleaning the motor body.
• Wipe the motor body and battery with a damp cloth. Do not immerse in water or other liquids.

Blending Arm, Whisk, Chopper Blade, and Pitcher

• Detach all accessories from the motor body.
• The blending arm, whisk, chopper blade, and pitcher are top-rack dishwasher safe.
• Alternatively, wash in warm, soapy water, then rinse thoroughly and dry.
• Exercise extreme caution when handling the blending arm blade, as it is very sharp.

Troubleshooting

If you experience issues with your KitchenAid Go Cordless Hand Blender, please refer to the following common solutions:

• Appliance does not turn on:
  Ensure the battery is fully charged and securely attached to the motor body. Verify that the chosen attachment (blending arm, whisk, or chopper motor) is correctly locked into place.
• Appliance stops during operation:
  The battery may be low. Recharge the battery. If the appliance overheats, it may temporarily shut off. Allow it to cool down before resuming use.
• Poor blending/chopping results:
  Ensure ingredients are cut into appropriate sizes. Do not overfill the blending pitcher or chopper bowl. Add sufficient liquid when blending to ensure smooth operation.
• Excessive vibration or noise:
  Check that all attachments are securely fastened. Ensure the blending arm or whisk is not hitting the sides of the container.

Specifications

Warranty and Customer Support

Your KitchenAid Go Cordless Hand Blender is covered by a 1 Year Limited Warranty. For detailed warranty information, please refer to the warranty card included with your product or visit the official KitchenAid website.

For technical assistance, replacement parts, or to register your product, please contact KitchenAid Customer Service. Contact information can typically be found on the KitchenAid website or in your product packaging.