Introduction
Thank you for choosing the GAOMON 10-inch Full Size Metal Platform Bed Frame. This manual provides essential information for the safe assembly, proper use, and maintenance of your new bed frame. Please read these instructions carefully before beginning assembly and retain them for future reference.

Image: The GAOMON 10-inch Full Size Metal Platform Bed Frame, fully assembled with a mattress and bedding, in a modern bedroom.
Safety Information
- Read all instructions: Ensure you understand all assembly steps and safety warnings before proceeding.
- Adult assembly required: This product should be assembled by adults.
- Weight Limit: Do not exceed the maximum recommended weight of 1000 pounds (approximately 453 kg).
- Proper Use: Do not jump on the bed frame. Distribute weight evenly across the frame.
- Regular Checks: Periodically check all bolts and connections to ensure they remain tight.
- Keep away from children: Small parts can be a choking hazard. Keep assembly components out of reach of children.
- Use on a level surface: Assemble and use the bed frame on a flat, stable surface to prevent tipping.
Package Contents
Before assembly, verify that all parts are present. All components and the assembly manual are typically packaged together.
- Headboard and Footboard sections (with unique arch design)
- Side Rails
- Steel Slats
- Center Support Legs
- Assembly Hardware (bolts, washers, Allen wrench)
- Instruction Manual

Image: All components of the GAOMON bed frame laid out, ready for assembly.
Setup (Assembly Instructions)
Assembly is designed to be straightforward. It is recommended to lay out all parts in order before beginning. An extra piece of hardware for each type is usually included.
- Unpack and Identify Parts: Carefully remove all components from the packaging. Identify each part by comparing it to the parts list in your included manual.
- Assemble Side Rails: Attach the side rails to the headboard and footboard sections using the provided bolts and Allen wrench. Ensure all connections are secure but do not overtighten initially.
- Install Center Support: Attach the center support legs to the designated points on the frame. These provide additional stability.
- Place Slats: Lay the steel slats across the frame. Ensure they are evenly spaced and securely fastened to the side rails. The unique arch design at the head and foot helps prevent mattress slippage.
- Final Tightening: Once all parts are in place, go back and securely tighten all bolts. Do not overtighten to avoid stripping screws.
- Position Bed Frame: Carefully move the assembled bed frame to its desired location.
- Place Mattress: Position your mattress directly onto the steel slats. A box spring is not required for this platform bed frame.

Image: Dimensional diagram of the bed frame, indicating a height of 10 inches and overall length/width.

Image: Detailed view highlighting the thick steel, upgraded midfoot support, and overall sturdy steel body frame construction.
Operating (Usage)
This platform bed frame is designed to support a mattress directly, eliminating the need for a box spring. Its 10-inch height is ideal for mattresses between 6 to 12 inches thick, providing a comfortable sleeping height.
- Mattress Compatibility: Suitable for full-size mattresses.
- No Box Spring Required: The sturdy steel slats provide ample support for your mattress.
- Noise-Free Design: Engineered to minimize noise, ensuring a quiet sleeping environment.
- Under-Bed Storage: The low height allows for convenient storage space underneath the bed.

Image: The GAOMON bed frame with mattress and bedding, showcasing its minimalist design and functional height.
Maintenance
- Cleaning: Wipe the metal frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the powder-coated finish.
- Tighten Connections: Periodically (e.g., every 3-6 months) check and retighten all bolts and screws to ensure the frame remains stable and secure.
- Inspect Slats: Ensure all steel slats are properly seated and not bent or damaged.
- Rust Prevention: The frame is powder-coated for rust resistance. Avoid prolonged exposure to moisture.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed frame is wobbly or unstable. | Loose bolts or uneven assembly. | Ensure all bolts are securely tightened. Check that the frame is on a level surface. |
| Squeaking noises. | Loose connections or friction between metal parts. | Retighten all bolts. The design is noise-free, but if noises occur, check for any parts rubbing together and ensure proper assembly. |
| Mattress slides on the frame. | Improper mattress placement or lack of friction. | Ensure the mattress is centered. The unique arch design at the head and foot is intended to prevent slippage. |
Specifications
- Model: FZZHTD23083106
- Brand: GAOMON
- Size: Full
- Material: Metal (Thick Steel)
- Product Dimensions (L x W x H): 196.1 cm (77.2") Length x 141.5 cm (55.7") Width x 25.4 cm (10") Height (from floor to top of frame)
- Height from Floor: 10 inches (approx. 25.4 cm)
- Recommended Mattress Thickness: 6-12 inches
- Maximum Recommended Weight: 1000 pounds (approx. 453 kg)
- Color: Black
- Assembly Required: Yes
- Special Features: Sturdy, Noise-free, Unique Arch Design (prevents mattress slippage), Upgraded Midfoot Structure
Warranty and Support
GAOMON is committed to providing high-quality products and customer satisfaction. If you encounter any issues during assembly or use, or if you have questions about your bed frame, please do not hesitate to contact our customer support team.
We aim to respond to all inquiries within 24 hours. Please refer to your purchase documentation or the seller's information on the platform where you purchased the product for specific contact details.
For assistance, please contact the seller directly via the platform's messaging system.