1. Safety Information
Please read all instructions carefully before assembly and use. Keep this manual for future reference.
- Ensure all parts are present and undamaged before beginning assembly. Do not use if any parts are missing or broken.
- Assemble the table on a soft, clean surface to prevent scratches.
- It is recommended that two people assemble this table for safety and ease.
- Do not overtighten screws during assembly, as this may damage the material.
- Keep small parts away from children during assembly.
- Do not stand or sit on the table during assembly.
- Place the table on a level surface to prevent instability. Use the adjustable foot pads to stabilize on uneven floors.
- Do not exceed the maximum weight recommendation of 200 pounds.
2. Package Contents
Verify that all components listed below are included in your package. If any parts are missing or damaged, please contact customer support.
- Tabletop sections (Engineered Wood)
- Metal Legs/Frame components
- Assembly Hardware (screws, bolts, washers, Allen wrench)
- Adjustable Foot Pads
- Assembly Guide (this document)
Image: Product dimensions and seating capacity diagram. The table measures 78.74 inches wide, 27.55 inches deep, and 29.52 inches high, designed to seat 6-8 people.
3. Assembly Instructions
Follow these steps carefully to assemble your Tribesigns dining table. A drill is recommended for faster assembly, but all necessary tools are included.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent damage. Identify each component using the parts list.
- Attach Legs to Tabletop Sections: Align the metal leg frames with the pre-drilled holes on the underside of the tabletop sections. Secure them using the provided screws and the Allen wrench. Ensure screws are tightened firmly but do not overtighten.
- Connect Tabletop Sections: If your tabletop comes in multiple sections, align them carefully and use the connecting hardware (if provided) to join them securely.
- Install Adjustable Foot Pads: Screw the adjustable foot pads into the bottom of each metal leg. These will help stabilize the table on uneven surfaces and protect your floor.
- Final Check: Once assembled, gently lift and place the table in its desired location. Check all connections to ensure they are secure. Adjust the foot pads as needed to eliminate any wobbling.
Image: Detail of screw hole alignment for easy installation.
Image: Illustration of adjustable foot pads for stability on uneven floors.
4. Usage Guidelines
This Tribesigns dining table is designed for versatile use in various settings.
- Seating Capacity: The table comfortably accommodates 6-8 individuals.
- Versatile Applications: Suitable for use as a dining table, party table, conference table, or a large computer desk.
- Weight Distribution: Distribute weight evenly across the tabletop. Avoid placing heavy items on one side.
- Movement: When moving the table, always lift it rather than dragging it to prevent damage to the legs and floor.
Image: The Tribesigns dining table in a typical dining room setting.
5. Care and Maintenance
Proper care will ensure the longevity and appearance of your dining table.
- Cleaning: Wipe the tabletop and metal legs with a damp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the finish.
- Spills: Clean spills immediately to prevent staining, especially on the engineered wood tabletop.
- Heat Protection: Use coasters or placemats under hot dishes to protect the tabletop from heat damage.
- Sunlight Exposure: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration over time.
- Regular Checks: Periodically check and tighten all screws and bolts to maintain stability.
Image: Features of the thickened MDF desktop, including waterproof and scratch-resistant properties.
6. Troubleshooting
- Table is Wobbly:
Ensure the table is on a level surface. Adjust the foot pads on each leg by twisting them until the table is stable and level.
Check all assembly screws and bolts to ensure they are securely tightened. Do not overtighten.
- Missing or Damaged Parts:
If you find any parts missing or damaged upon opening the package, please contact Tribesigns customer support immediately. Do not attempt to assemble the product with incomplete or damaged parts.
- Difficulty Assembling:
Review the assembly instructions carefully. Ensure you are using the correct hardware for each step. If issues persist, consider seeking assistance from another person, as two people are recommended for assembly.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Tribesigns |
| Model Number | LSH-YS0060-DT-QQ |
| Product Dimensions | 78.7" W x 27.5" D x 29.5" H (78.74" W x 27.55" D x 29.52" H) |
| Color | Black |
| Material Type | Engineered Wood (Tabletop), Metal (Frame/Legs) |
| Item Weight | 62 Pounds |
| Maximum Weight Recommendation | 200 Pounds |
| Seating Capacity | 6-8 Persons |
| Product Care Instructions | Wipe with Damp Cloth |
| Assembly Required | Yes (Tools included, Drill recommended) |
| Adjustable Foot Pads | Yes |
8. Warranty and Support
This Tribesigns dining table comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and claims, please refer to the warranty card included in your package or contact Tribesigns customer support.
If you encounter any issues or have questions not covered in this manual, please reach out to Tribesigns customer service for assistance. Contact information can typically be found on the product packaging or the official Tribesigns website.
