FLEXISPOT XL51 Dual OKIN Motor Power Lift Recliner Chair Instruction Manual

1. Introduction

Thank you for choosing the FLEXISPOT XL51 Dual OKIN Motor Power Lift Recliner Chair. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new recliner. Please read it thoroughly before use and retain it for future reference.

2. Important Safety Information

• Read all instructions: Before operating the recliner, familiarize yourself with all functions and safety warnings.
• Keep children and pets away: Ensure children and pets are clear of the chair, especially during operation, to prevent injury.
• Avoid pinching hazards: Keep hands and feet clear of the reclining mechanism to prevent pinching.
• Proper placement: Place the recliner on a level surface, ensuring adequate clearance around the chair for reclining and lifting functions.
• Weight limit: Do not exceed the maximum weight recommendation of 350 pounds.
• Power cord safety: Ensure the power cord is not pinched, tangled, or placed in high-traffic areas where it could be damaged. Unplug the chair from the power outlet before cleaning or maintenance.
• Professional repair: Do not attempt to repair the chair yourself. Contact customer support for any issues.

3. Package Contents

Your FLEXISPOT XL51 recliner is designed for convenient "All-in-One Shipping" and arrives in a single box. Carefully unpack all components and verify against the list below:

• Main Recliner Base (with pre-installed OKIN dual motors)
• Backrest
• Left Armrest
• Right Armrest
• Power Adapter
• Power Cord
• Handheld Remote Control (for lift/recline)
• Handheld Massage & Heat Remote Control
• User Manual

Image: The FLEXISPOT XL51 Power Lift Recliner Chair, fully assembled.

Image: Various components of the FLEXISPOT XL51, including the power adapter, power cords, and two remote controls.

4. Assembly Instructions

The FLEXISPOT XL51 is designed for minimal assembly. Please allow 48 hours for the chair to fully rebound and expand after unboxing, as it is delivered in a compressed state.

1. Unpack Components: Carefully remove all parts from the single shipping box.
2. Attach Armrests: Identify the left and right armrests. Align the metal brackets on the armrests with the corresponding slots on the main recliner base. Slide them down firmly until they lock into place. Ensure the zippers on the armrests are properly secured.
3. Attach Backrest: Align the backrest with the main recliner base. Slide it down onto the metal brackets until it securely locks.
4. Connect Wiring: Locate the wiring connections at the back of the chair. Connect the color-coded wires (typically red to red, white to white) for the massage and heat functions. Connect the main power cable to the power adapter, and then connect the power adapter to the chair's main power input.
5. Plug In: Plug the power cord into a wall outlet.
6. Remote Placement: Place the remote controls in the convenient side pockets.

5. Operating Instructions

Your FLEXISPOT XL51 recliner comes with two remote controls: one for lift and recline functions, and another for massage and heat.

5.1. Lift and Recline Functions

Use the primary handheld remote control to adjust the chair's position. The German OKIN dual motors allow for independent adjustment of the backrest and footrest.

• Lift to Standing: Press and hold the "Up" arrow button (usually the top button) to gently raise the chair to an almost standing position, assisting you in getting out.
• Recline: Press and hold the "Down" arrow button (usually the bottom button) to recline the backrest and raise the footrest. Continue holding to reach a nearly 180° lay-flat position.
• Adjust Backrest Independently: Use the dedicated backrest adjustment buttons (often depicted as a chair with only the back moving) to adjust the backrest angle without moving the footrest.
• Adjust Footrest Independently: Use the dedicated footrest adjustment buttons (often depicted as a chair with only the footrest moving) to adjust the footrest height without moving the backrest.

Image: A detailed diagram illustrating the functions of the lift and recline remote control, including the built-in USB charging port.

5.2. Massage and Heat Functions

Use the secondary handheld remote control to activate and customize the massage and heating features.

• Power On/Off: Press the power button to activate or deactivate the massage and heat functions.
• Massage Zones: Select from 8 massage points targeting the back, lumbar, thighs, and legs.
• Massage Modes: Choose from various massage modes (e.g., pulse, wave, normal) and adjust intensity levels (low, medium, high).
• Lumbar Heating: Activate the lumbar heating function for soothing warmth.
• Timer: Set a timer for the massage and heat functions to automatically turn off after a desired duration.

Image: The FLEXISPOT XL51 recliner showcasing its 8 massage points and lumbar heating feature.

6. Key Features

• Dual OKIN Motor: Equipped with German OKIN dual motors for independent control of the backrest and footrest, offering infinite reclining positions up to nearly 180 degrees.
• Oversized Design: Features a spacious 24.5-inch wide seat, providing ample room for comfort.
• 8-Point Massage & Lumbar Heating: Eight massage points target the back, lumbar, thighs, and legs, complemented by a lumbar heating function for enhanced relaxation.
• USB Charging Ports: Conveniently located USB ports allow you to charge your devices while relaxing.
• Side Pockets: Integrated side pockets provide storage for remote controls, magazines, or other small items.
• Extended Footrest: The footrest extends to provide full leg support in reclined positions.

Image: A close-up view of the German OKIN dual motors, emphasizing their quality and independent operation for the backrest and footrest.

Image: The FLEXISPOT XL51 recliner shown in its nearly 180-degree lay-flat position, illustrating its full recline and lift assistance features.

7. Maintenance and Care

• Cleaning: Wipe clean with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the faux leather.
• Regular Inspection: Periodically check all connections and moving parts to ensure they are secure and functioning correctly.
• Power Cord: Ensure the power cord is not damaged or frayed. If damage occurs, discontinue use and contact customer support.

8. Troubleshooting

If you encounter any issues with your FLEXISPOT XL51 recliner, please refer to the following common solutions:

If these solutions do not resolve the issue, please contact FLEXISPOT customer support for further assistance.

9. Specifications

Image: Dimensional drawing of the FLEXISPOT XL51 recliner, showing various measurements and the 350 lbs weight capacity.

10. Warranty & Support

FLEXISPOT is committed to providing high-quality products and customer satisfaction.

• Returns: You are allowed to return/exchange the furniture within 30 days of when you receive it.
• Customer Support: For any questions, issues, or warranty claims, please contact FLEXISPOT customer support.
• Email: contact@flexispot.com
• Call: +1(855)585-5618
• Online: Visit the FLEXISPOT Store on Amazon for more information and support.