Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your KISLOT Counter Height Swivel Barstools. Please read this manual thoroughly before assembly and use to ensure proper function and safety. Retain this manual for future reference.
Safety Information
Important Safety Precautions:
- Do not exceed the maximum weight recommendation of 250 pounds (113 kg) per stool to ensure stability and prevent accidents.
- Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not stand on the stool.
- Keep children away from the assembly area. Small parts may pose a choking hazard.
- Use the stool on a flat, stable surface.
Package Contents
Before beginning assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.
| Part | Description | Quantity |
|---|---|---|
| A | Seat Cushion with Backrest | 2 |
| B | Leg Frame Assembly | 2 |
| C | Swivel Plate | 2 |
| D | Footrest Ring | 2 |
| E | Hardware Pack (Bolts, Washers, Allen Wrench) | 1 |
Setup and Assembly
Assembly is required for these barstools. It is recommended to assemble on a soft, clean surface to prevent scratching. Estimated assembly time: under 15 minutes per stool.
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a protected surface.
- Attach Swivel Plate to Seat: Align the swivel plate (C) with the pre-drilled holes on the underside of the seat cushion (A). Secure using the provided bolts and washers from the hardware pack (E). Do not overtighten.
- Attach Leg Frame to Swivel Plate: Connect the leg frame assembly (B) to the swivel plate (C) using the remaining bolts and washers from the hardware pack (E). Ensure the leg frame is oriented correctly so the footrest attachment points face inwards.
- Install Footrest Ring: Insert the footrest ring (D) into the designated slots on the leg frame assembly (B). Secure with the provided screws. Ensure the ring is level and stable.
- Final Tightening: Once all parts are loosely assembled, carefully place the stool upright. Apply gentle pressure to the seat and then progressively tighten all bolts and screws using the Allen wrench. Do not overtighten to avoid damaging the components.
Image: Illustration of the barstool assembly process, showing the seat, swivel plate, leg frame, and footrest ring.
Operating Instructions
Your KISLOT Counter Height Swivel Barstools are designed for comfortable seating at counter height surfaces.
- Swivel Function: The stool features a 360-degree smooth swivel mechanism. To rotate, simply apply gentle force to the seat in the desired direction.
- Seating: Sit centrally on the seat cushion. Use the footrest for added comfort and support.
Image: Two KISLOT barstools positioned at a kitchen island, demonstrating typical use.
Image: Close-up of the barstool highlighting the 360-degree swivel feature and its range of motion.
Maintenance and Care
Proper care will extend the life and appearance of your barstools.
- Cleaning: For general cleaning, wipe the upholstered surfaces with a dry cloth. For spills, immediately blot with a clean, dry cloth. Avoid abrasive cleaners or harsh chemicals.
- Frame Care: Wipe the metal and wood components with a soft, damp cloth. Dry thoroughly.
- Regular Inspection: Periodically check all bolts and screws to ensure they remain tight. Re-tighten as needed to maintain stability.
- Weight Limit: Adhere strictly to the 250-pound maximum weight recommendation.
Image: Detailed view of the beige leather-like upholstery, emphasizing its texture and ease of cleaning.
Troubleshooting
Refer to this section for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Stool feels wobbly or unstable. | Loose bolts or uneven floor. | Check and tighten all assembly bolts. Ensure the stool is on a flat, level surface. |
| Swivel mechanism is stiff or noisy. | Lack of lubrication or debris in the mechanism. | Apply a small amount of silicone-based lubricant to the swivel plate. Ensure no debris is obstructing movement. |
| Missing parts during assembly. | Packaging error. | Do not proceed with assembly. Contact KISLOT customer support immediately for replacement parts. |
Specifications
- Model: T-KSA2051
- Product Dimensions: 20.9"D x 19.7"W x 37.8"H
- Seat Height: 26 Inches
- Seat Width: 20 Inches
- Maximum Weight Recommendation: 250 Pounds (113 kg)
- Material: Upholstered (Beige Leather-like finish), Solid Wood Legs, Iron Footrest
- Assembly Required: Yes
- Number of Items: 2 (Set of 2)
- Item Weight: Approximately 45 pounds (per set)
Image: Technical drawing illustrating the dimensions of the KISLOT barstool, including height, width, and depth.
Warranty and Support
KISLOT products are covered by a 1-year warranty from the date of purchase. This warranty covers manufacturing defects. For warranty claims, missing parts, or any product support inquiries, please contact KISLOT customer service.
Customer Support Email: CS.furniture@outlook.com
Please provide your purchase details and model number (T-KSA2051) when contacting support for faster service.
