Evolur Loft Antilia Mid-Century 4-in-1 Convertible Crib

Introduction

Thank you for choosing the Evolur Loft Antilia Mid-Century 4-in-1 Convertible Crib. This crib is designed to provide a safe and comfortable sleeping environment for your child, adapting as they grow from infancy through their toddler and youth years. This manual provides essential information for assembly, safe use, maintenance, and conversion of your crib.

The Antilia crib features a modern design with a White & Natural finish, crafted from solid poplar wood. It is GREENGUARD Gold certified and JPMA certified, ensuring it meets high safety and environmental standards.

Image: The Evolur Loft Antilia Mid-Century 4-in-1 Convertible Crib in White & Natural, showcasing its modern design and sturdy construction.

Safety Information

Your child's safety is our top priority. Please read and follow all instructions carefully before assembling and using this crib. Keep this manual for future reference.

• WARNING: Failure to follow these warnings and the assembly instructions could result in serious injury or death.
• Inspect the crib regularly for damaged hardware, loose joints, missing parts, or sharp edges. Do not use the crib if any parts are missing or broken. Contact Evolur for replacement parts. Do not substitute parts.
• Ensure all bolts and screws are securely tightened. Periodically check and retighten as necessary.
• Do not place the crib near windows where cords from blinds or drapes could strangle a child.
• Do not place items with a string or strap around a child's neck, such as pacifier clips or necklaces.
• The mattress used with this crib must be at least 27.25 inches (69 cm) by 51.625 inches (131 cm) with a thickness not exceeding 6 inches (15 cm).
• This crib is GREENGUARD Gold Certified, meaning it has been tested for low chemical emissions, contributing to healthier indoor air. It is also JPMA certified, meeting the highest safety standards set by the CPSC and ASTM.
• Proposition 65 Warning: This product can expose you to chemicals including formaldehyde, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Image: The Antilia crib highlighting its GREENGUARD Gold certification for low chemical emissions and Baby Safety Alliance membership for rigorous testing.

Package Contents

Before beginning assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact Evolur customer service for assistance.

The package includes the components necessary for the crib configuration. Conversion kits for toddler bed and full-size bed are sold separately.

• Crib components (headboard, footboard, side rails, mattress support, hardware)

Assembly Instructions

Assembly of the Evolur Loft Antilia Crib requires two adults. Please follow the step-by-step instructions provided in the separate assembly guide included with your product. Ensure you have adequate space and all tools required before starting.

• Unpack all components and lay them out on a soft, clean surface to prevent scratches.
• Identify all parts and hardware using the parts list in your assembly guide.
• Follow the numbered steps carefully, ensuring all connections are secure. Do not overtighten screws.
• Once assembled, verify the crib is stable and all hardware is tight.

Image: Diagram showing the dimensions of the assembled Evolur Loft Antilia Crib: 58.75 inches length, 31.25 inches width, and 46.5 inches height.

Operating Instructions: Mattress Height Adjustment

The Evolur Loft Antilia Crib features 3 adjustable mattress height positions to accommodate your child's growth and ensure their safety. Adjust the mattress support to the appropriate level based on your child's developmental stage.

• Highest Position: For newborns and infants who cannot push up on their hands and knees. This position allows easier access to your baby.
• Middle Position: For infants who can push up on their hands and knees or have started to roll over.
• Lowest Position: For toddlers who can stand. This position prevents them from climbing out of the crib.

To adjust the mattress height, carefully remove the mattress and mattress support. Reposition the mattress support to the desired height, ensuring it is securely fastened at all four corners before replacing the mattress.

Image: The Antilia crib illustrating the three adjustable mattress height positions: Newborn, Rolling over, and Standing, with arrows indicating the progression.

Conversion Instructions

The Evolur Loft Antilia Crib is a 4-in-1 convertible crib, designed to transition into a daybed, toddler bed, and full-size bed. Conversion kits are sold separately.

• Crib: The initial configuration for infants.
• Daybed: To convert to a daybed, remove the front rail of the crib. The mattress support remains in the lowest position.
• Toddler Bed: To convert to a toddler bed, remove the front rail and install the universal toddler guardrail (sold separately).
• Full-Size Bed: To convert to a full-size bed, remove both side rails and attach the headboard and footboard to universal full-size bed rails (sold separately).

Refer to the specific instructions included with your toddler guardrail and full-size bed rails for detailed conversion steps.

Image: A visual guide demonstrating the 4-in-1 conversion of the Antilia crib: Crib, Toddler bed (with guardrail), Daybed/kids sofa, and Full-size bed (with bed rails). Conversion kits are sold separately.

Maintenance and Care

Proper care will ensure the longevity and safety of your Evolur crib.

• Cleaning: Wipe surfaces with a dry cloth. For stubborn marks, use a damp cloth with mild soap and water, then dry immediately. Avoid abrasive cleaners or strong chemicals.
• Inspection: Periodically check all screws, bolts, and other hardware to ensure they are tight and secure. Retighten as needed.
• Storage: If storing the crib, do so in a dry, temperature-controlled environment to prevent warping or damage to the wood.

Troubleshooting

If you encounter any issues with your Evolur Loft Antilia Crib, please refer to the following common solutions:

• Wobbling or Instability: Ensure all bolts and screws are fully tightened. Check that the crib is on a level surface.
• Difficulty Assembling: Review the assembly instructions carefully. Ensure you are using the correct hardware for each step. Sometimes, parts may appear similar but are designed for specific locations.
• Missing or Damaged Parts: Do not attempt to use the crib with missing or damaged parts. Contact Evolur customer support immediately for replacement parts.

For further assistance, please contact Evolur customer support.

Specifications

Warranty and Support

Evolur stands behind the quality of its products. For information regarding warranty coverage, replacement parts, or any other support needs, please visit the official Evolur website or contact their customer service department directly. Please have your model number (930) and purchase information available when contacting support.

Evolur Customer Service: For contact details, please refer to the information provided with your product packaging or visit the Evolur brand website.