1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Wisoqu White Noise Sound Machine with Bluetooth Speaker. Please read this manual thoroughly before using the device to ensure proper function and longevity.

Image 1.1: The Wisoqu White Noise Sound Machine with its integrated stand deployed, revealing the control buttons.
2. Package Contents
Upon unboxing, please verify that all items listed below are present:
- 1 x Wisoqu BT Sleep Speaker
- 1 x Card Reader
- 1 x User Manual (this document)
- 1 x Charging Cable (Type-C)

Image 2.1: All components included in the product package.
3. Setup
3.1 Charging the Device
Before initial use, fully charge the device. Connect the provided Type-C charging cable to the charging port on the speaker and to a compatible USB power source. The device features a 400mAh Li-ion battery, providing approximately 20 hours of usage on a full charge.
3.2 Bluetooth Pairing
- Ensure the speaker is powered on.
- Activate Bluetooth on your mobile device.
- Search for available devices and select "Wisoqu Speaker" (or similar name) from the list.
- Once connected, a confirmation sound may play, and the device will be ready for audio playback.
The speaker supports Bluetooth 5.3 for stable and fast connections.
3.3 Micro SD Card Installation (Optional)
The device includes a slot for a Micro SD card (not included) up to 32GB. Insert the Micro SD card into the designated slot to play audio files directly from the card.
4. Operating Instructions
4.1 Power On/Off
Locate the power button on the device. Press and hold to power the speaker on or off.
4.2 Audio Playback
Once connected via Bluetooth or with a Micro SD card inserted, you can play audio. The speaker utilizes bone conduction technology to deliver sound, which is designed to be soft and low-noise, promoting relaxation without ear discomfort. It also offers a 3D surround sound effect through vibration.

Image 4.1: The device's bone conduction technology provides full and transparent sound quality.
4.3 Sound Selection
The device offers a variety of pre-programmed white noise and sleep-inducing sounds. These include:
- White noise
- Stream sound
- Lullaby
- Bird song
- Meditation song
- Rain sound
- Waves sound
- Thunder sound
Refer to the device's control buttons for switching between these sound effects.

Image 4.2: Available sound effects for relaxation and sleep.
4.4 Volume Control
Use the '+' and '-' buttons on the device to adjust the volume to your preferred level.
4.5 Timed Shutdown
The device features a timed shutdown function. Double-click the designated button (refer to device markings) to adjust or activate the timed shutdown setting, allowing the speaker to turn off automatically after a set period.
4.6 Mobile Phone Stand Function
The integrated stand can be deployed to hold your mobile phone, providing convenience while using the speaker.

Image 4.3: Key features of the Wisoqu Sleep Speaker.
5. Maintenance
To ensure the longevity and optimal performance of your Wisoqu White Noise Sound Machine, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to wipe the exterior of the device. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface.
- Storage: When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid Moisture: Do not expose the device to water or excessive humidity. This can cause internal damage.
- Handle with Care: Avoid dropping the device or subjecting it to strong impacts.
6. Troubleshooting
If you encounter issues with your Wisoqu White Noise Sound Machine, please refer to the following common solutions:
- Device not powering on: Ensure the device is fully charged. Connect it to the charging cable and allow it to charge for at least 30 minutes before attempting to power it on again.
- No sound: Check the volume level on both the speaker and your connected Bluetooth device. Ensure the device is properly paired via Bluetooth or that the Micro SD card is correctly inserted and contains playable audio files.
- Bluetooth connection issues: Turn off and then on the Bluetooth function on your mobile device and the speaker. Try re-pairing the devices. Ensure the speaker is within the effective range of your Bluetooth device.
- Sound distortion: Reduce the volume on both the speaker and your connected device. Ensure there are no obstructions between the speaker and your Bluetooth source.
If the problem persists after attempting these steps, please contact customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Item Type | Bone Conduction Sleep Speaker |
| Material | ABS |
| Battery Type | Li-ion battery |
| Battery Capacity | 400mAh |
| Usage Time | Approximately 20 hours |
| Rated Power | 3W |
| Charging Interface | Type C |
| Micro SD Card Slot | Supports up to 32GB (card not included) |
| Functions | Bluetooth playback, Micro SD card playback, Timing shutdown, Mobile phone stand |
| Product Dimensions | 4.72 x 3.54 x 1.18 inches (120 x 90 x 30 mm) |
| Item Weight | 4.1 ounces (116g) |
| Model Number | Wisoquq1c370ayzm-13 |

Image 7.1: Physical dimensions of the Wisoqu Sleep Speaker.
8. Warranty and Support
Information regarding product warranty and customer support was not provided in the available data. Please refer to the product packaging or the retailer's website for details on warranty coverage and how to contact customer support for assistance.