Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Tribesigns Black Console Table, Model RY0058. Please read these instructions carefully before assembly and use to ensure safe and correct installation. This product is designed for indoor use.
Safety Information
- Ensure all parts are present and undamaged before beginning assembly.
- Assemble the table on a soft, clean surface to prevent scratches.
- Do not overtighten screws during assembly.
- Do not exceed the maximum weight recommendation of 200 pounds.
- Keep small parts away from children during assembly.
- General safety warnings may apply, such as ensuring the table is properly assembled and not overloaded.
Package Contents
Verify that all components listed below are included in your package. If any parts are missing or damaged, please contact customer service.
- Tabletop sections (2 pieces, designed to connect for a 94-inch length)
- Arched base supports (multiple pieces)
- Assembly hardware (screws, bolts, connectors)
- Assembly Guide
- Tools: Hammer, Wrench (included)
Assembly Instructions
Recommended number of people for assembly: 1. However, having an additional person may make assembly easier, especially for handling larger sections.
Tools required: Hammer, Wrench (included).
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent damage. Identify each part using the included assembly guide.
- Attach Base Supports: Secure the arched base supports to the underside of the tabletop sections using the provided hardware. Ensure all connections are firm but do not overtighten.
- Join Table Sections: Carefully align and connect the two tabletop sections using the designated connectors and hardware to form the full 94-inch length.
- Final Tightening: Once all components are in place, gently tighten all screws and bolts to ensure stability.
- Placement: Carefully move the assembled table to its desired location.
Visual Aid: Refer to the images below for guidance on assembly and component identification.


Operating Instructions
The Tribesigns Black Console Table is designed for indoor use as an entryway table, sofa table, hallway table, or accent table.
- Placement: Position the table on a flat, stable surface. Avoid placing it in direct sunlight or near heat sources to prevent material damage.
- Weight Distribution: Distribute items evenly across the tabletop. Do not place heavy objects on one side only. The maximum weight capacity is 200 pounds.
- Display: Use the tabletop to display decorative items, lamps, books, or other personal belongings.
Maintenance and Care
Proper care will extend the life and appearance of your console table.
- Cleaning: Wipe the table surface with a damp cloth to remove dust and spills. Follow with a dry cloth to prevent water spots.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or polishes that may damage the finish.
- Protection: Use coasters under drinks and placemats under decorative items to protect the surface from scratches and moisture.
- Inspection: Periodically check all screws and bolts to ensure they remain tight. Retighten if necessary.
Troubleshooting
If you encounter any issues with your Tribesigns Black Console Table, please refer to the following common solutions:
- Wobbling: Ensure the table is placed on a level surface. Check all assembly connections and tighten any loose screws.
- Scratches/Damage: For minor scratches, touch-up pens or furniture markers matching the black finish may be used. For significant damage, contact customer service.
- Missing Parts: If parts were missing upon delivery, contact Tribesigns customer service immediately with your purchase details.
Specifications
| Feature | Detail |
|---|---|
| Brand | Tribesigns |
| Model Number | RY0058 |
| Product Dimensions (D x W x H) | 11.81" x 94.48" x 33.85" |
| Item Weight | 36.59 Pounds |
| Maximum Weight Recommendation | 200 Pounds |
| Frame Material | Engineered Wood (E1 level manufactured wood) |
| Color | Black |
| Assembly Required | Yes |
| Recommended Assembly Persons | 1 |
| Included Tools | Hammer, Wrench |
| Indoor/Outdoor Usage | Indoor |
Warranty and Support
For warranty information or customer support, please refer to the contact details provided with your purchase or visit the official Tribesigns website. Keep your purchase receipt for any warranty claims.





