BLOKEES Transformers Classic Class 13 Elita-1 Instruction Manual

1. Introduction

Thank you for purchasing the BLOKEES Transformers Classic Class 13 Elita-1 action figure. This model kit allows you to assemble a highly detailed and articulated representation of Elita-1 from the Transformers One universe. This manual provides essential information for safe assembly, operation, and maintenance of your figure.

2. Safety Information

• Age Recommendation: This product is recommended for ages 12 years and up. It contains small parts that may pose a choking hazard for younger children.
• Battery Safety: The figure includes a nonstandard battery for the light-up eye feature. Ensure batteries are inserted correctly and dispose of them responsibly. Do not mix old and new batteries.
• Assembly: Handle parts with care during assembly to avoid breakage or injury. No sharp tools are required.
• Supervision: Adult supervision is recommended during assembly, especially for younger users within the recommended age range.

3. Package Contents

Verify that all components are present before beginning assembly:

• Elita-1 Figure Components (on runners)
• Hand and Weapon Accessories
• Display Base
• Instruction Manual (this document)
• 1 Nonstandard Battery (pre-installed or included for light-up eyes)

Figure 3.1: Overview of Elita-1 model kit components, including parts on runners, weapon, hands, and display base.

4. Assembly Instructions

The BLOKEES Elita-1 figure is designed for easy, tool-free assembly. No glue, paint, or clippers are required. Follow these steps to assemble your figure:

1. Part Identification: Carefully identify all parts on the runners by referring to the included visual guide (if any, otherwise use the component image).
2. Detaching Parts: Gently twist or snap parts off the runners. The design allows for clean separation without tools.
3. Body Assembly: Begin by assembling the main body sections, connecting the torso, waist, and hip components.
4. Limb Assembly: Attach the arm and leg components, ensuring joints are securely snapped into place.
5. Head Assembly: Assemble the head, ensuring the light-up eye mechanism (if separate) is correctly installed and the battery is in place.
6. Accessory Attachment: Attach the hand and weapon accessories as desired. The hands are interchangeable.
7. Display Base: Assemble the display base and attach the figure to it for stable posing.

Figure 4.1: Front view of the fully assembled Elita-1 figure.

Figure 4.2: Back view of the fully assembled Elita-1 figure.

5. Features and Operation

• Light-Up Eyes: Elita-1 features built-in LED eyes. To activate, locate the small switch on the back of the head or neck area and toggle it. Ensure the battery is correctly installed.
• Articulation: The figure boasts over 20 points of articulation, allowing for a wide range of dynamic poses. Carefully manipulate joints to achieve desired stances.
• Accessories: The figure comes with character-specific accessories, including a weapon. These can be held in the figure's interchangeable hands.
• Display Stand: Use the included display stand to securely pose Elita-1 in various action-oriented or static positions.

Figure 5.1: Key features of the Elita-1 figure.

Figure 5.2: Elita-1 displayed on its stand, showcasing articulation and accessories.

6. Maintenance

• Cleaning: Use a soft, dry cloth to gently wipe dust from the figure. Avoid harsh chemicals or abrasive materials.
• Storage: Store the figure away from direct sunlight, extreme temperatures, and high humidity to prevent material degradation.
• Joint Care: If joints become stiff, gently work them back and forth. If they become loose, refer to the troubleshooting section.
• Battery Replacement: When the light-up eyes dim or stop working, replace the nonstandard battery. Follow the instructions for battery compartment access, ensuring correct polarity.

7. Troubleshooting

• Loose Joints: If a joint feels loose, carefully re-seat the part. For persistent looseness, a small amount of clear nail polish or a similar friction-enhancing liquid can be applied to the joint peg and allowed to dry before reassembly.
• Light-Up Eyes Not Working:
  1. Ensure the power switch is in the "ON" position.
  2. Check if the battery is correctly installed with the proper polarity.
  3. Replace the battery with a new one if the existing battery is depleted.
• Parts Not Fitting: Do not force parts together. Re-examine the instructions and ensure you have the correct parts oriented properly. Slight pressure should be sufficient for snap-fit assembly.

8. Specifications

Figure 8.1: Packaging dimensions of the Elita-1 figure.

9. Official Product Video

Watch the official BLOKEES Transformers One product video to see the figures in action:

10. Warranty and Support

For warranty information or technical support, please refer to the official BLOKEES website or contact their customer service. You can also visit the BLOKEES store on Amazon for more products and information.

• BLOKEES Amazon Store: Visit Store
• BLOKEES Facebook Page: Connect on Facebook