1. Introduction
Thank you for purchasing the BLOKEES Transformers Classic Class 14 Sentinel Prime figure. This instruction manual provides detailed guidance for assembling, operating, and maintaining your collectible figure. Please read through these instructions carefully to ensure proper use and to maximize your enjoyment of this product.
This product is an officially licensed Transformers collectible, meticulously crafted to replicate Sentinel Prime’s cinematic appearance. It is recommended for ages 12 years and up.
Image 1.1: The BLOKEES Transformers Classic Class 14 Sentinel Prime figure.
What's Included:
- Sentinel Prime Figure components
- Character-specific weapons (sword, blaster)
- Display stand
- 1 Nonstandard Battery (included for light-up eyes)
2. Setup and Assembly
The BLOKEES Sentinel Prime figure requires assembly. No glue, clippers, or brush are required for construction. Follow the steps below to assemble your figure.
Image 2.1: Overview of figure components and accessories.
Assembly Steps:
- Unpack Components: Carefully remove all parts from the packaging. Organize them by type (body parts, weapons, accessories).
- Assemble Torso and Limbs: Follow the included visual guide (not provided in this text) to connect the main body, arms, and legs. Ensure all joints snap securely into place.
- Attach Head: Securely attach the head to the torso.
- Install Batteries for Light-Up Eyes: Locate the battery compartment in the head. Insert the included nonstandard battery, ensuring correct polarity. Close the compartment.
- Attach Wings/Backpack: Connect the golden wing components to the back of the figure.
- Attach Weapons: The figure includes a sword and a blaster. These can be held in the figure's hands.
- Assemble Display Stand: Connect the pieces of the display stand as shown in the visual guide. Place the assembled figure onto the stand for stable presentation.
Note: Some parts, such as the feet for battle mode thrusters, may require careful handling during swapping. Apply gentle, even pressure to avoid damage.
3. Operation and Features
Your Sentinel Prime figure is designed with several features for dynamic display and interaction.
Image 3.1: Sentinel Prime showcasing glowing eyes and weapon accessories.
Key Features:
- Light-Up Eyes: The figure features built-in LED eye effects. To activate, locate the small switch on the back of the head or neck area and toggle it to the "ON" position. Toggle to "OFF" to conserve battery life.
- Premium Articulation: With over 20 points of articulation, the figure can be posed in a wide range of dynamic stances. Carefully move each joint to achieve desired poses. Avoid excessive force to prevent damage.
- Switchable Combat & Standard Modes: The figure includes interchangeable parts to convert between battle-ready and standard display modes. Refer to the visual guide for specific instructions on swapping components like feet or armaments.
- Character-Specific Weapons: The included sword and blaster can be placed in the figure's hands. Ensure a firm but gentle grip when inserting or removing weapons.
- Display Stand: Use the provided display stand to showcase your figure in a stable and stylish manner.
Official Product Video:
Video 3.1: Official BLOKEES Transformers ONE Movie product video, showcasing various figures including Sentinel Prime in action.
4. Maintenance
Proper care will ensure the longevity and appearance of your Sentinel Prime figure.
- Cleaning: Use a soft, dry cloth to gently wipe away dust. For stubborn dirt, lightly dampen the cloth with water (do not use harsh chemicals or abrasive cleaners).
- Storage: Store the figure away from direct sunlight, extreme temperatures, and high humidity to prevent discoloration or material degradation.
- Battery Replacement: If the light-up eyes dim or stop working, replace the nonstandard battery. Ensure the replacement battery is of the correct type and inserted with the correct polarity.
- Handling: Always handle the figure by its main body parts. Avoid gripping small, delicate accessories or thin joint areas with excessive force.
5. Troubleshooting
If you encounter any issues with your figure, refer to the following common solutions:
| Problem | Solution |
|---|---|
| Parts do not fit together. | Ensure you are using the correct parts for the intended connection. Apply gentle, even pressure. If a part is stuck, check for any obstructions or misalignment. Do not force parts. |
| Light-up eyes are not working. | Check if the power switch is in the "ON" position. Verify that the battery is correctly installed with the proper polarity. If the issue persists, replace the battery. |
| Figure feels loose or unstable. | Ensure all joints are fully snapped into place during assembly. If using the display stand, confirm the figure is securely attached to it. |
| Weapons do not stay in hands. | Ensure the weapon is inserted correctly into the designated grip. Some weapons may require a specific orientation. |
6. Specifications
Detailed specifications for the BLOKEES Transformers Classic Class 14 Sentinel Prime figure:
| Feature | Detail |
|---|---|
| Product Dimensions | 10 x 6 x 3 inches |
| Item Weight | 7.8 ounces |
| Model Number | CC14 |
| Manufacturer Recommended Age | 12 years and up |
| Batteries | 1 Nonstandard Battery (included) |
| Articulation Points | 20+ |
| Release Date | March 12, 2025 |
| Manufacturer | Pai Technology Inc. |
Image 6.1: Product packaging with dimensions.
7. Warranty and Support
For warranty information or technical support regarding your BLOKEES Transformers Classic Class 14 Sentinel Prime figure, please contact the manufacturer, Pai Technology Inc., or refer to the official BLOKEES brand store.
- BLOKEES Brand Store: Visit the BLOKEES Store on Amazon
- Social Media: BLOKEES on Facebook
Please retain your proof of purchase for any warranty claims.