Beatbot AquaSense 2 Ultra Robotic Pool Cleaner User Manual

Introduction

The Beatbot AquaSense 2 Ultra is a cordless robotic pool cleaner designed for comprehensive pool maintenance. It features advanced AI mapping, 5-in-1 cleaning capabilities, smart surface parking, and water clarification technology, providing an efficient and hassle-free solution for complex pool environments.

Figure 1: The Beatbot AquaSense 2 Ultra Robotic Pool Cleaner in Prussian Blue, shown with its charging dock and a smartphone displaying the companion app.

Safety Information

Please read all safety instructions carefully before operating the Beatbot AquaSense 2 Ultra. Failure to follow these instructions may result in property damage, injury, or death. Keep this manual for future reference.

• Ensure the pool cleaner is fully charged before first use.
• Do not operate the cleaner if any part is damaged. Contact customer support for assistance.
• Keep hands, hair, and loose clothing away from moving parts.
• Always turn off and unplug the cleaner from the charging dock before performing any maintenance or cleaning.
• Do not allow children to operate the pool cleaner without adult supervision.
• The pool pump should be turned off when the cleaner is in operation to prevent interference with its sensors and navigation.

What's Included

The Beatbot AquaSense 2 Ultra package includes the following components:

• 1 * AquaSense 2 Ultra Robotic Pool Cleaner
• 1 * Dual Filter Basket
• 1 * Charging Dock
• 1 * Clarifying Agent Kit
• 1 * Hook (for retrieval)
• 2 * Side Brushes (extra)
• 1 * Screwdriver
• 4 * Screws for Side Brushes
• 1 * Genuine Dust and Water-proof Cover
• 1 * Quick Start Guide
• 1 * User Manual (this document)

Setup

1. Initial Assembly

The AquaSense 2 Ultra requires minimal assembly. Ensure the side brushes are securely attached. When installing side brushes, it is recommended to insert the end with the smaller tab first into the wheel slot, then attach the end with the larger tab.

2. Charging the Unit

Place the robotic pool cleaner onto its cordless charging dock. The unit will begin charging automatically. A full charge takes approximately 4.5 hours. Ensure the charging dock is placed in a dry, protected area away from direct sunlight and moisture.

3. App Connection (Optional)

For enhanced control and monitoring, download the Beatbot app from your device's app store. The app connects to the cleaner via Wi-Fi (2.4 GHz only) and Bluetooth. You may need to set up a guest network on your router for the cleaner if your main network is 5 GHz. The app allows you to view cleaning maps, customize cleaning modes, and monitor real-time status.

Figure 2: Screenshot of the Beatbot app displaying the pool map and cleaning path, highlighting the AI Vision for precise mapping and obstacle navigation.

Operation

1. Starting a Cleaning Cycle

To start cleaning, press the power button on the unit. Then, select your desired cleaning mode using the mode buttons. The available modes include Floor, Standard (Floor, Walls, Waterline), Pro (Floor, Walls, Waterline, Surface), ECO, MultiZone, and Area modes. After selecting a mode, place the cleaner on a level surface for 5 seconds for calibration, then gently place it into the pool.

Figure 3: Illustration of the Beatbot AquaSense 2 Ultra's 5-in-1 cleaning capabilities, showing it cleaning the floor, walls, water surface, waterline, and performing water clarification.

2. AI-Powered Cleaning and Navigation

The AquaSense 2 Ultra utilizes a 4-core CPU and 27 sensors for intelligent path optimization, adapting to various pool shapes. Its AI vision helps avoid obstacles and navigate tight corners, cleaning in smart S and N-patterns. It also features AI-powered platform cleaning for multi-level pools (minimum platform depth: 13.7 inches / 35 cm) and plant debris detection during floor cleaning.

Figure 4: The Beatbot AquaSense 2 Ultra navigating a multi-level pool, demonstrating its capability to clean elevated platforms.

3. Surface Cleaning and Water Clarification

The cleaner's dual-sided brushes and 6 guide wheels enhance surface cleaning, reaching edges and corners effectively. The automatic ClearWater technology uses a natural, skin-safe clarifier to bind particles, providing crystal-clear water up to 4 times faster without mixing chemicals.

Figure 5: The Beatbot AquaSense 2 Ultra performing superior surface cleaning with its dual side brushes, improving edge and corner cleaning efficiency.

Figure 6: The Beatbot AquaSense 2 Ultra demonstrating its ClearWater Clarifying Technology, which rapidly clarifies pool water by removing dirt, oils, and residues using 100% natural, no-chemical agents.

4. Smart Surface Parking and Retrieval

When cleaning is complete or the battery drops below 12%, the AquaSense 2 Ultra automatically returns to the water surface for easy retrieval. Once at the surface, use the one-touch park button in the app to guide it to the pool edge. The SmartDrain feature automatically releases 4.85 lbs of water, making removal from the pool effortless.

Figure 7: The Beatbot AquaSense 2 Ultra demonstrating its smart retrieval features, including smart return to surface, one-click poolside parking, and auto water release for easy handling.

5. Battery Life

The 13,400mAh battery provides up to 10 hours of surface cleaning, or 5 hours for floor, wall, or waterline cleaning. It can clean pools up to 3,875 sq ft on a single charge.

Maintenance

1. Cleaning the Dual Filter Basket

The dual filter basket is designed for easy removal and cleaning. It is recommended to clean the filters immediately after each use to prevent debris from drying and hardening, which can make cleaning more difficult. Simply remove the basket and rinse it thoroughly with a hose.

2. Storage

When not in use, store the Beatbot AquaSense 2 Ultra on its charging dock in a cool, dry place. Use the provided genuine dust and water-proof cover to protect the unit from environmental elements.

Troubleshooting

If you encounter any issues with your Beatbot AquaSense 2 Ultra, please refer to the following common troubleshooting tips:

• Cleaner not moving or stuck: Ensure the pool pump is off during operation. Check for large debris obstructing the brushes or tracks.
• Poor cleaning performance: Clean the filter basket thoroughly. Ensure the side brushes are properly installed and not worn.
• App connectivity issues: Verify your Wi-Fi network is 2.4 GHz. Restart the cleaner and your mobile device. Ensure the cleaner is out of the water when attempting to connect via Wi-Fi.
• Unit not charging: Ensure the charging dock is properly plugged in and the cleaner is correctly seated on the contacts.

For further assistance, please contact Beatbot customer support.

Specifications

Warranty and Support

The Beatbot AquaSense 2 Ultra comes with a 3-Year Full Replacement Protection. This warranty covers the entire machine, offering replacement instead of repairs, ensuring industry-leading reliability. The product is built with UV and heat-resistant automotive-grade IMR coating and backed by 15 certifications and over 200 rigorous quality tests.

Figure 8: The Beatbot AquaSense 2 Ultra highlighting its robust construction for long-lasting performance, including automotive-grade UV resistance and a 3-Year Full Replacement Protection.

For warranty claims, technical support, or any inquiries, please refer to the contact information provided in your Quick Start Guide or visit the official Beatbot website.

Additional Information

AI-Powered Cruise Detection

The AquaSense 2 Ultra's AI-powered cruise detection ensures no debris is left behind, even recognizing missed leaves for thorough cleaning.

Figure 9: The Beatbot AquaSense 2 Ultra demonstrating its AI-Powered Cruise Detection, which recognizes and targets missed debris like leaves on the pool floor.

Official Product Video