1. Introduction
Thank you for purchasing the EMERIO WK-132229 Stainless Steel Kettle. This appliance is designed for efficient water heating with precise temperature control and a convenient keep-warm function. Please read this manual carefully before first use to ensure safe and optimal operation. Keep these instructions for future reference.
2. Important Safety Instructions
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
- Read all instructions thoroughly before use.
- Do not touch hot surfaces. Always use handles or knobs.
- To protect against fire, electric shock, and personal injury, do not immerse the power cord, plugs, or the kettle itself in water or any other liquid.
- Close supervision is necessary when the appliance is used by or near children.
- Unplug the kettle from the outlet when not in use and before cleaning. Allow it to cool completely before adding or removing parts, and before cleaning.
- Do not operate any appliance with a damaged cord or plug, or if the appliance malfunctions or has been damaged in any manner. Contact customer support for assistance.
- The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or personal injury.
- Do not use the kettle outdoors.
- Do not let the power cord hang over the edge of a table or counter, or touch hot surfaces.
- Do not place the kettle on or near a hot gas or electric burner, or in a heated oven.
- Always attach the plug to the appliance first, then plug the cord into the wall outlet. To disconnect, turn any control to "off," then remove the plug from the wall outlet.
- Do not use the appliance for purposes other than its intended use.
- Scalding may occur if the lid is removed during the heating cycle.
- This appliance is intended for household use only.
3. Product Overview
Familiarize yourself with the components and controls of your EMERIO WK-132229 kettle.

Figure 3.1: EMERIO WK-132229 Kettle, showing the main body, handle, spout, and integrated digital display.
Components:
- Kettle Body: Features a double-walled design with a food-grade stainless steel interior and a durable plastic exterior.
- Lid: Equipped with a push-button release for easy opening and secure closing.
- Handle: Ergonomically designed for comfortable and safe pouring.
- Spout: Designed for controlled pouring.
- Digital Display: An intuitive touch-sensitive screen showing current temperature, pre-programmed settings, and control buttons.
- Power Base: Provides power to the kettle and allows for 360-degree rotation. Includes cord storage.

Figure 3.2: Detailed view of the digital display, showing temperature readout, pre-programmed tea icons, temperature adjustment buttons (+/-), Keep Warm (SSS), and Power On/Off buttons.
Controls on Digital Display:
- Current Temperature Display: Shows the real-time water temperature.
- Pre-programmed Temperature Icons: Quick selection for common tea types (e.g., 40°C for warm water, 70°C for green tea, 80°C for white tea, 90°C for oolong tea).
- Temperature Adjustment Buttons (+ / -): Manually adjust the target temperature in 5°C increments.
- Keep Warm Function Button (SSS icon): Activates the 2-hour keep warm function.
- Power ON/OFF Button (circle with line icon): Starts and stops the heating process.

Figure 3.3: The kettle features a BPA-free design for all plastic parts in contact with food and a 'Cool Wall' improved design for safety.
4. Setup
Follow these steps for initial setup and first use:
- Unpack: Carefully remove the kettle and all its accessories from the packaging. Retain packaging for future storage or transport.
- Placement: Place the power base on a dry, flat, stable, and heat-resistant surface, away from the edge of the counter.
- Initial Cleaning: Before first use, fill the kettle with clean water up to the MAX level. Boil the water (by selecting 100°C and pressing the power button) and then discard it. Repeat this process 2-3 times to remove any manufacturing residues and ensure optimal taste.
5. Operating Instructions
Operating your EMERIO WK-132229 kettle is straightforward:
- Fill the Kettle: Press the lid release button on the handle to open the lid. Fill the kettle with the desired amount of water, ensuring the water level is between the MIN and MAX marks indicated inside the kettle. Close the lid securely until it clicks.
- Place on Base: Place the filled kettle firmly onto its power base.
- Power On: Plug the power cord into a suitable wall outlet. The digital display will illuminate, showing the current water temperature.
- Select Temperature:
- Manual Selection: Use the + and - buttons on the display to adjust the target temperature. You can select any temperature between 40°C and 100°C in 5°C increments.
- Pre-programmed Selection: For convenience, touch one of the pre-programmed tea temperature icons (e.g., 40°C, 70°C, 80°C, 90°C) to quickly set the desired temperature for different beverages.
- Start Heating: Press the Power ON/OFF button (circle with line icon) to begin the heating process. The display will show the current water temperature as it rises towards your selected target.
- Automatic Shut-off: The kettle will automatically switch off once the selected temperature is reached. A beep may sound to indicate completion.
- Keep Warm Function: If you wish to maintain the water temperature, after selecting your desired temperature, press the Keep Warm button (SSS icon). The kettle will then maintain the selected temperature for up to 2 hours. To deactivate, press the Power ON/OFF button again.
- Pouring: Carefully lift the kettle from the base and pour the hot water. The cool-touch exterior helps prevent burns, but always exercise caution.

Figure 5.1: Interior of the kettle, showing the stainless steel construction and the MAX fill line.
6. Maintenance and Cleaning
Regular cleaning and maintenance will prolong the life of your kettle and ensure optimal performance.
- Before Cleaning: Always unplug the kettle from the power outlet and allow it to cool completely before cleaning.
- Exterior Cleaning: Wipe the exterior of the kettle and the power base with a soft, damp cloth. Do not use abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the surface. Never immerse the kettle body or power base in water or any other liquid.
- Interior Cleaning (Descaling): Over time, mineral deposits (limescale) may build up inside the kettle, especially in hard water areas. This can affect performance and taste. To descale:
- Fill the kettle with a mixture of water and white vinegar (e.g., 1 part vinegar to 2 parts water) or a commercial descaling solution designed for kettles.
- Boil the mixture and let it stand for at least 30 minutes, or longer if the limescale buildup is heavy.
- Empty the kettle and rinse thoroughly with fresh water several times to remove any residual descaling solution.
- If necessary, repeat the descaling process until all deposits are removed.
7. Troubleshooting
If you encounter any issues with your kettle, please refer to the following common problems and solutions:
- Kettle does not turn on:
- Ensure the power cord is securely plugged into a functioning wall outlet and the power base.
- Check that the kettle is correctly placed on the power base.
- Water does not heat:
- Verify that a target temperature has been selected and the power button has been pressed.
- Check for excessive limescale buildup inside the kettle; descale if necessary.
- Kettle switches off too soon:
- This often indicates limescale buildup. Descale the kettle as described in the Maintenance section.
- Water tastes unusual:
- Ensure the initial cleaning steps (boiling and discarding water 2-3 times) were performed before first use.
- Descale the kettle if necessary, as mineral deposits can affect water taste.
If the problem persists after trying these solutions, please contact EMERIO customer support.
8. Specifications
| Brand | EMERIO |
| Model Number | WK-132229 |
| Capacity | 1.7 Liters |
| Power | 2200 Watts |
| Voltage | 230 Volts (AC) |
| Material | Stainless Steel (interior), Plastic (exterior) |
| Color | Black |
| Dimensions (L x W x H) | 22.2 x 16.1 x 26 cm |
| Weight | 1.06 Kilograms |
| Special Features | Digital display, Automatic shut-off, Rotating base, Digital temperature control, Push-button lid, Double wall insulation, Heat-resistant handle, One-handed operation, BPA-free. |
9. Warranty and Support
Warranty information for your EMERIO WK-132229 kettle is typically provided with your purchase. Please refer to the documentation included in the product packaging for specific details on warranty coverage, terms, and conditions.
For technical assistance, spare parts, or any customer service inquiries, please contact EMERIO customer support. Contact details can usually be found on the manufacturer's official website or within the product packaging.