UBPET F10 Automatic Wet Food Cat Feeder Instruction Manual

Product Overview

The UBPET F10 Automatic Cat Feeder is designed to provide fresh, timed meals for your pets, accommodating both wet and dry food. It features advanced semiconductor cooling technology to maintain food freshness for up to 24 hours, eliminating the need for ice packs. With programmable feeding times and a 5-meal food tray, it helps establish healthy eating habits for cats and small dogs.

Figure 1: UBPET F10 Automatic Cat Feeder.

Key Features

• 24-hour Intelligent Fresh-keeping: Utilizes semiconductor refrigeration to keep food fresh at 10 to 15°C for up to 24 hours, removing the need for ice packs.
• Intelligent Feeding Time: Supports 1 instant feeding and 4 scheduled feedings daily, promoting regular and quantitative nutrition.
• 5-meal Food Tray: Features five individual compartments, each with a maximum capacity of 300g (290ml), suitable for wet food, dry food, medicine, or milk.
• Sealed Food-grade Meal Tray: Made from BPA-free ABS material, ensuring safety and durability. The tray is easily disassembled for cleaning and is dishwasher safe.
• Energy-saving & Pet-friendly Design: Low power consumption (approx. 0.2° electricity per day in default cooling mode). Wide-caliber shallow bowl design for comfortable eating. Hidden buttons prevent pets from tampering with settings. Operates at less than 40dB.

Setup Guide

1. Unpack the Feeder: Carefully remove all components from the packaging. Ensure all parts are present: main unit, food tray, lid, and power adapter.
2. Initial Placement: Place the feeder in your pet's usual feeding area. It is recommended to place the device at least 4 inches (10cm) away from any wall to ensure proper ventilation for the cooling system.

Figure 2: Recommended placement and dimensions of the feeder.
3. Power Connection: Connect the power adapter to the feeder and plug it into a standard electrical outlet. The unit will power on.
4. Familiarization Period: Before programming, allow your pet to become comfortable with the feeder. You can place a small amount of their favorite treats or food in the open compartment for a few days. This helps them associate the feeder with positive experiences.
5. Filling the Food Tray: Lift the lid by pressing the secure locking snaps. Fill the five compartments with your pet's desired wet or dry food. Each compartment has a maximum capacity of 300g (290ml).


Figure 3: Filling the automatic rotating food tray.

6. Secure the Lid: Close the lid firmly until the secure locking snaps engage. This ensures the food remains fresh and prevents pets from accessing the internal mechanism.

Figure 4: Securely locking the feeder lid.

Operating Instructions

Setting Time and Feeding Schedule

The control panel with the LCD screen and buttons is located under the lid to prevent accidental changes by pets. Lift the lid to access it.

Figure 5: Hidden control panel for programming.

1. Access Control Panel: Gently lift the top cover to reveal the LCD screen and control buttons.


Figure 6: Detailed view of the LCD screen and control buttons.

2. Set Current Time: Use the “Setting button” (gear icon) to enter time setting mode. Use the “Up adjustment button” (triangle up) and “Down adjustment button” (triangle down) to set the current hour and minute. Press the “Setting button” again to confirm.
3. Program Feeding Times: The feeder allows for 1 instant feeding and 4 scheduled feedings.
   • Press the “Setting button” to cycle through the meal settings (Meal 1, Meal 2, Meal 3, Meal 4).
   • For each meal, use the “Up” and “Down” buttons to set the desired feeding time.
   • The feeder will automatically rotate to the next available food compartment at the programmed time.

Figure 7: Example of a programmed feeding schedule.

Cooling Modes

The UBPET F10 features 3 cooling modes to maintain food freshness. These modes adjust the internal temperature to keep food between 10 to 15°C (50-59°F) for up to 24 hours, based on a room temperature of 77°F.

1. Adjust Cooling: Press the “Power button/Cooling button” (snowflake icon) to cycle through the three cooling levels (Level 1, Level 2, Level 3).
2. Temperature Settings:
   • Level 1: Approximately 73.4°F (23°C)
   • Level 2: Approximately 62.6°F (17°C)
   • Level 3: Approximately 55.4°F (13°C)
   Note: All temperature settings are relative temperatures, measured at room temperature 77°F as the base temperature.

Figure 8: Cooling modes and temperature ranges.

Figure 9: The 24-hour intelligent fresh-keeping system.

Figure 10: Semiconductor cooling technology for continuous freshness.

Pet-Friendly Features

• Paw Protection: If a pet's paw gets into the feeder during rotation, the feeder will stop to prevent injury.


Figure 11: Paw protection feature.

• Shallow Bowl Design: The wide-caliber shallow bowls are designed for easier and more comfortable eating for pets.

Figure 12: Wide-caliber shallow bowl design for pet comfort.

Maintenance

Cleaning Instructions

Regular cleaning ensures hygiene and extends the life of your feeder. The food tray and lid are designed for easy removal and cleaning.

1. Disassemble: Lift the lid and remove the food tray from the main unit.
2. Wash Components: The food tray and lid can be rinsed under running water or placed in the dishwasher for thorough cleaning.

Figure 13: Detachable food tray for easy cleaning.
3. Clean Main Unit: Wipe the main unit (base) with a damp cloth. Ensure no water enters the electronic components. Wipe off any water on the base in time.
4. Reassemble: Once all parts are dry, reassemble the food tray and lid onto the main unit.

Important: Do not store wet food in the cat feeder for more than 24 hours.

Troubleshooting

Specifications

Warranty and Support

For warranty information and customer support, please refer to the documentation included with your product or contact UBPET customer service directly through their official website or the platform where the product was purchased.