Introduction
This manual provides essential instructions for the safe assembly, operation, and maintenance of your Patiojoy 42 Inch Rectangular Propane Gas Fire Table. Please read all instructions carefully before use and retain this manual for future reference.
Image: The Patiojoy fire pit table in use, providing warmth and ambiance for a gathering of four people on an outdoor patio.
Safety Information
WARNING: For outdoor use only. Improper installation, adjustment, alteration, service, or maintenance can cause injury or property damage. Read the installation, operating, and maintenance instructions thoroughly before installing or servicing this equipment.
- Keep clear of combustible materials, gasoline, and other flammable vapors and liquids.
- Ensure adequate ventilation. Do not obstruct airflow around the unit.
- Never leave the fire pit unattended while in operation.
- Keep children and pets away from the fire pit.
- Do not use the protective cover until the burner has completely cooled down.
- Keep lava rocks dry to prevent splashes when using.
- Do not completely cover the burner with volcanic rocks when igniting.
Package Contents
Verify that all components are present before beginning assembly:
- Fire Pit Table Unit
- Lava Rocks
- PVC Protective Cover
- Instruction Manual
- Assembly Hardware (screws, bolts, etc.)
- Gas Regulator and Hose
- 1 x AAA Battery (for ignition)
Setup and Assembly
Assembly is required. Follow the detailed instructions provided in the included assembly guide. Ensure all connections are secure before proceeding.
- Unpack Components: Carefully remove all parts from the packaging.
- Assemble Frame: Follow the step-by-step instructions to assemble the main body of the fire pit table.
- Install Burner: Secure the stainless steel burner into its designated position.
- Connect Gas Line: Connect the gas regulator and hose to the burner. Ensure all connections are tight.
- Place Propane Tank: The fire pit requires a standard 20 lbs propane gas tank (not included). Place the tank inside the designated compartment and secure it with the inner fixing ring.
- Add Lava Rocks: Distribute the lava rocks around the burner. Do not completely cover the burner with volcanic rocks when igniting.
- Insert Battery: Install the provided AAA battery into the electric pulse ignition device.
Image: Detailed view of the fire pit's stainless steel burner, lava rocks, and the gas regulator connection point. Important notes regarding lava rock placement during ignition are highlighted.
Operating Instructions
Igniting the Fire Pit
- Ensure the propane tank valve is fully open.
- Push and turn the control knob to the "LOW" position.
- Immediately press and hold the igniter button. You should hear a clicking sound and see a flame.
- Once ignited, continue to hold the control knob in for 10-15 seconds to allow the thermocouple to heat up.
- Release the control knob. If the flame extinguishes, repeat steps 2-4.
- Adjust the flame height by turning the control knob between "LOW" and "HIGH".
Image: Detailed view of the electric pulse ignition system, including the control knob for flame adjustment and the igniter button. Instructions for safe ignition are visible.
Turning Off the Fire Pit
- Turn the control knob to the "OFF" position.
- Close the valve on the propane tank.
- Allow the unit to cool completely before covering or moving.
Using as a Coffee Table
When the fire pit is not in use and has completely cooled, you can cover the burner area with the provided lid to transform it into a functional coffee table. This 2-in-1 design allows for versatile outdoor use.
Image: This illustration demonstrates the fire pit table's dual functionality, serving as both a heating fire pit and a practical coffee table when the lid is in place.
Maintenance
Cleaning
- Ensure the fire pit is completely cool before cleaning.
- Wipe exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners.
- Periodically inspect the burner and gas connections for any signs of damage or leaks.
Lava Rock Care
- Keep lava rocks dry. Wet lava rocks can cause splashing when heated.
- Replace lava rocks if they become excessively dirty or degraded.
Protective Cover
Use the provided PVC protective cover to shield the fire table from sunlight and rain when not in use. Important: Do not use the cover until the burner has completely cooled down.
Image: The PVC protective cover designed to protect the fire table from outdoor elements like sun and rain, ensuring its longevity.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Burner does not ignite. |
|
|
| Low flame. |
|
|
| Flame extinguishes after ignition. |
|
|
Specifications
- Heat Output: 60,000 BTU
- Overall Dimensions (L x W x H): 42 x 20 x 25 inches
- Tabletop Weight Capacity: 220 lbs
- Material: Heavy-duty steel frame, stainless steel burner, PVC cover
- Ignition Type: Electric Pulse Ignition (requires 1 x AAA battery)
- Fuel Type: Propane Gas (standard 20 lbs tank, not included)
- Color: Black
Image: A detailed diagram illustrating the product dimensions, including overall length, width, height, and the internal space for a 20 lbs propane gas tank.
Image: Close-up views highlighting key product features such as the lid with a handling ring, the metal door handle for tank access, adjustable footpads for stability, and the sturdy metal tabletop construction.
Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the manufacturer's official website. Keep your purchase receipt as proof of purchase.