SmallRig Magnetic Selfie Light for iPhone

Introduction

The SmallRig Vibe P48 Magnetic Selfie Light is designed to provide enhanced illumination for your smartphone photography and videography. Its compact and portable design, combined with versatile lighting adjustments, makes it an ideal accessory for various content creation needs. This manual provides detailed instructions on setting up, operating, and maintaining your device.

Image: Overview of the SmallRig Magnetic Selfie Light, showing the light unit, the included metal ring, and the built-in mirror.

What's in the Box

• Detachable Mobile Phone LED Video Light x 1
• Metal Ring Sticker x 1
• USB-A to USB-C Charging Cable x 1

Setup

The SmallRig Vibe P48 offers two primary methods for attachment to your smartphone:

1. Magnetic Attachment (for MagSafe-compatible devices): Simply align the light with the MagSafe area on the back of your iPhone or MagSafe-compatible phone case. The light will instantly snap into place.
2. Metal Ring Sticker Attachment (for non-MagSafe devices): For Android phones or iPhones without MagSafe, use the included metal ring sticker. Clean the back of your phone or phone case thoroughly. Peel off the adhesive backing from the metal ring and firmly press it onto the desired location on your device. Once the ring is securely attached, the selfie light can be magnetically attached to this ring.

To charge the device, connect the provided USB-A to USB-C charging cable to the light's USB-C port and a compatible USB power source. The light features an 850mAh polymer lithium battery, providing up to 90 minutes of continuous full-power use.

Image: Demonstrates direct magnetic attachment to an iPhone and the use of the metal ring sticker for non-MagSafe phones.

Operating Instructions

The SmallRig Vibe P48 is designed for intuitive operation:

• Power On/Off: Long press the power button located on the side of the light to turn the device on or off.
• Adjusting Brightness: Use the '+' and '-' buttons to cycle through five adjustable brightness levels (20%, 40%, 60%, 80%, 100%).
• Adjusting Color Temperature: Short press the color temperature button to switch between four color temperature options: Warm Yellow (2700K), Yellow (3200K), White (4300K), and Cold White (5600K).
• 360° Fill Light Coverage: The light features a mini dual-axis head that allows for full 360° pan rotation and 270° tilt adjustment. This enables versatile lighting angles for diverse shooting needs.
• Built-in Mirror: The integrated mirror is convenient for quick touch-ups and checks, making grooming routines and quick adjustments easier on-the-go.

Image: Visual representation of the four color temperature settings and five brightness levels available on the light.

Image: Illustrates the 360-degree pan and 270-degree tilt capabilities of the light for flexible positioning.

Image: Examples of the light's versatility, including use for vlogging, food photography, and as a desktop support.

Maintenance

To ensure the longevity and optimal performance of your SmallRig Vibe P48, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to wipe the exterior of the light. Avoid using abrasive cleaners or solvents, which may damage the surface.
• Storage: Store the light in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To preserve battery health, avoid fully discharging the battery frequently. If storing for extended periods, charge the battery to approximately 50% every three months.

Troubleshooting

If you encounter issues with your SmallRig Vibe P48, refer to the following common problems and solutions:

• Light not turning on: Ensure the device is fully charged. Connect it to a power source using the USB-C cable and allow it to charge for at least 30 minutes before attempting to power on again.
• Magnetic attachment is weak or not holding:
  • For MagSafe-compatible devices, ensure there is no obstruction between the light and your phone/case.
  • If using the metal ring sticker, verify it is securely attached to a clean, flat surface on your phone or case. Ensure the sticker is not peeling or damaged.
  • Thick phone cases may interfere with magnetic strength. Consider using a thinner case or attaching the metal ring directly to the phone.
• Light output is inconsistent or flickering: This may indicate a low battery. Recharge the device fully. If the issue persists, contact customer support.

Specifications

Official Product Videos

No official seller videos were found in the provided product data. Please refer to the manufacturer's website or product page for any available video demonstrations.

Warranty and Support

For warranty information and customer support, please refer to the documentation included with your product or visit the official SmallRig website. Keep your purchase receipt as proof of purchase for warranty claims.