PAWPRO ALPHA1 Replacement Remote Control User Manual

1. Product Overview

1.1 What's in the Box

• PAWPRO ALPHA1 Replacement Remote Control
• USB Charging Cable
• User Manual (this document)

Note: The PAWPRO ALPHA1 training collar is sold separately and is required for use with this remote control.

1.2 Key Features

• Replacement Remote: Designed specifically for the PAWPRO ALPHA1 training collar.
• Easy Pairing: Simple pairing process, typically completed in under 5 seconds.
• Legal Compliance: Operates without electric shock, adhering to the 2024 Animal Welfare Law.
• Three Training Modes: Features Beep, Vibration, and Boost Vibration modes.
• Extended Range: Offers an exceptional range of up to 3000 meters.
• Dual Channel: Capable of controlling two compatible collars simultaneously.
• Rechargeable: Built-in rechargeable battery for convenience.

2. Safety Information

This PAWPRO ALPHA1 Replacement Remote Control is designed for use with the PAWPRO ALPHA1 training collar, which operates without electric shock, in compliance with the 2024 Animal Welfare Law. Always prioritize your dog's well-being and use the device responsibly.

• No Electric Shock: This system exclusively uses Beep, Vibration, and Boost Vibration modes.
• Supervise Use: Always supervise your dog during training sessions.
• Appropriate Training: Use the remote as a training aid, not as a punishment tool. Positive reinforcement is recommended.
• Remote Water Resistance: The remote control is not waterproof. Avoid exposure to water or moisture.

3. Getting Started

3.1 Charging the Remote

Before first use, fully charge the remote control.

1. Locate the charging port on the remote control.
2. Connect the USB charging cable to the remote and a suitable USB power adapter (not included).
3. The charging indicator light will show the charging status.
4. Once fully charged, disconnect the cable and ensure the charging port cover is securely closed to prevent dust ingress.

3.2 Pairing the Remote with the Collar

This replacement remote must be paired with your existing PAWPRO ALPHA1 collar. The process is quick and easy.

1. Step 1: Turn on your remote control and select Channel 1.
2. Step 2: Turn on your receiver collar by pressing the power button for 2 seconds.
3. Step 3: Press the collar's power button 3 times consecutively to enter pairing mode.
4. Step 4: Press any function button on the remote control. Pairing to Channel 1 is now complete!

If you encounter difficulties, please refer to the customer support section.

4. Operating Instructions

4.1 Remote Control Functions

The remote control features an intuitive layout for easy operation.

• Power Button: Turns the remote on/off.
• Channel Selector: Allows selection between Channel 1 and Channel 2 for multi-dog training.
• Mode Buttons: Dedicated buttons for Beep, Vibration, and Boost Vibration modes.
• Intensity Adjustment: Use the side buttons to adjust the intensity level for Vibration and Boost Vibration modes.
• Safety Lock: A dedicated switch to prevent accidental activation.

4.2 Modes of Operation

The PAWPRO ALPHA1 remote offers three humane training modes:

• Beep Mode: Emits an audible tone from the collar. Useful for attention-getting or as a warning.
• Vibration Mode: Delivers a gentle vibration to the collar. Effective for redirecting attention or reinforcing commands.
• Boost Vibration Mode: Provides a stronger, more immediate vibration. Designed for urgent situations or when a higher level of attention is required.

4.3 Adjusting Intensity

The intensity of the Vibration and Boost Vibration modes can be adjusted to suit your dog's sensitivity and the training situation. Refer to the remote's display for the current intensity level.

4.4 Dual Channel Operation

If you have two PAWPRO ALPHA1 collars, you can control both with a single remote by switching between Channel 1 and Channel 2 using the dedicated button on the side of the remote.

4.5 Safety Lock

Activate the safety lock on the side of the remote to prevent accidental button presses, ensuring commands are only sent when intended.

5. Maintenance

5.1 Cleaning and Care

• Wipe the remote control with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Ensure the charging port cover is always closed when not charging to protect against dust and debris.
• Store the remote in a cool, dry place when not in use.

5.2 Storage

When storing the remote for extended periods, ensure it is fully charged and then turn it off. Recharge periodically to maintain battery health.

6. Troubleshooting

If you experience issues with your PAWPRO ALPHA1 Replacement Remote Control, please refer to the following common solutions:

• Remote not turning on: Ensure the remote is fully charged.
• Collar not responding to remote: Re-check the pairing procedure (Section 3.2). Ensure the remote is on the correct channel (1 or 2) for the collar. Verify both devices are charged.
• Short range: Ensure there are no major obstructions between the remote and the collar. Check battery levels on both devices.
• Accidental activation: Ensure the safety lock is engaged when not actively training.

For further assistance, please contact customer support.

7. Specifications

8. Warranty and Support

8.1 Manufacturer's Warranty

This PAWPRO ALPHA1 Replacement Remote Control comes with a 2-year manufacturer's warranty. Please retain your proof of purchase for warranty claims.

8.2 Customer Support

For any questions, technical support, or warranty inquiries, please contact PAWPRO customer service. You can find contact information on the official PAWPRO website or through your retailer.

In case of difficulty with pairing, you can also email: contact@pawpro.eu