1. Introduction
The RUBI DT-10IN MAX Extendable Table is designed to provide additional workspace and support when cutting large-format tiles with the RUBI DT-250 MAX tile saw. This accessory enhances cutting precision and efficiency by offering a stable, extended surface for material handling.
Constructed from reinforced extruded aluminum with a protective rubber-coated top, the table ensures both durability and material safety. Its integrated extendable legs provide crucial stability, preventing movement during operation.
2. Safety Information
WARNING: Always read and understand all safety instructions before operating this product or any associated equipment. Failure to follow these instructions may result in serious injury or property damage.
- Ensure the DT-10IN MAX Extendable Table is securely attached to the DT-250 MAX tile saw and its legs are fully extended and stable before placing any material on it.
- Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and gloves, when operating the tile saw and handling tiles.
- Do not exceed the maximum weight capacity of the extension table. Refer to the DT-250 MAX manual for overall system limitations.
- Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
- Keep children and bystanders away while operating the tile saw and extension table.
- Inspect the extension table for any damage before each use. Do not use if damaged.
3. Package Contents
Verify that all items are present and undamaged upon unpacking:
- RUBI DT-10IN MAX Extendable Table
- Stability Legs (2 units)
- Instruction Manual (this document)
4. Setup and Installation
This section details the steps for attaching the DT-10IN MAX Extendable Table to your RUBI DT-250 MAX tile saw.
4.1 Attaching the Extendable Table
Prepare the Tile Saw: Ensure your RUBI DT-250 MAX tile saw is powered off and disconnected from the power source. Position the saw on a stable, level surface.
Image 4.1.1: The RUBI DT-250 MAX tile saw with the DT-10IN MAX extension table installed.
Position the Extension Table: Align the connection points of the DT-10IN MAX Extendable Table with the corresponding slots on the side of the DT-250 MAX tile saw's work surface. The extension table is designed to seamlessly integrate with the saw's existing structure.
Image 4.1.2: Proper alignment of the extension table during installation.
Secure the Table: Gently slide the extension table into place until it clicks or locks securely. Ensure there is no play or instability in the connection. Refer to your DT-250 MAX manual for specific locking mechanisms if necessary.
Image 4.1.3: The DT-10IN MAX extension table, showing its design for secure attachment.
4.2 Installing the Stability Legs
Locate Leg Attachment Points: Identify the designated attachment points on the underside of the DT-10IN MAX Extendable Table or the main saw stand where the stability legs are to be installed.
Image 4.2.1: The stability legs provided with the DT-10IN MAX.
Attach Legs: Insert the stability legs into their respective attachment points. Tighten any knobs or clamps to secure them firmly. Ensure the legs are fully extended and locked into position to provide maximum support.
Image 4.2.2: Securing the stability legs to the saw stand.
Verify Stability: Gently push down on the extension table to confirm it is stable and does not wobble. Adjust the legs as needed to achieve a level and secure work surface.
5. Operating Instructions
The DT-10IN MAX Extendable Table provides an expanded surface for supporting large tiles during cutting operations with the DT-250 MAX tile saw.
Prepare the Tile: Place the large-format tile onto the combined work surface of the DT-250 MAX and the DT-10IN MAX extension table. Ensure the tile is fully supported and stable across its length.
Image 5.1.1: Positioning a large tile for cutting.
Align for Cut: Adjust the tile's position to align the desired cut line with the saw blade. The rubber surface of the extension table helps prevent the tile from slipping during alignment and cutting.
Perform the Cut: Follow the operating instructions for your RUBI DT-250 MAX tile saw to perform the cut. Maintain steady pressure and guide the tile smoothly across the cutting path, ensuring continuous support from the extension table.
Remove Cut Pieces: Once the cut is complete, carefully remove the tile pieces from the work surface. Always ensure the saw blade has come to a complete stop before handling cut materials.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your DT-10IN MAX Extendable Table.
- Cleaning: After each use, clean the rubber surface and aluminum frame of the extension table to remove tile dust, debris, and water residue. Use a damp cloth and mild detergent if necessary. Avoid abrasive cleaners that could damage the rubber or aluminum finish.
- Inspection: Periodically inspect the table for any signs of wear, damage, or loose connections. Pay close attention to the rubber surface for tears and the stability legs for proper function.
- Storage: Store the extension table in a clean, dry place away from direct sunlight and extreme temperatures. If detaching from the saw, store it in a manner that prevents bending or damage to the frame.
7. Troubleshooting
This section addresses common issues you might encounter with the DT-10IN MAX Extendable Table.
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is unstable or wobbles. |
|
|
| Tile slips on the table surface. |
|
|
| Difficulty attaching/detaching the table. |
|
|
8. Specifications
- Model: DT-10IN MAX
- Part Number: 58907
- Compatibility: RUBI DT-250 MAX Tile Saw (Ref. 26994)
- Material: Reinforced Extruded Aluminum, Rubber Surface
- Product Dimensions: Approximately 50" L x 16" W x 4" H (127 cm L x 40.6 cm W x 10.2 cm H)
- Item Weight: Approximately 28.2 pounds (12.8 kg)
- Maximum Tile Support Length: Up to 48 inches (120 cm) when combined with DT-250 MAX
9. Warranty Information
The RUBI DT-10IN MAX Extendable Table is covered by a limited warranty. For specific terms, conditions, and duration of your warranty, please refer to the warranty card included with your product or visit the official RUBI website. Keep your proof of purchase for warranty claims.
10. Customer Support
For technical assistance, spare parts, or further information regarding your RUBI DT-10IN MAX Extendable Table, please contact RUBI customer service:
- Website: www.rubi.com
- Contact Information: Refer to the "Contact Us" section on the official RUBI website for regional phone numbers and email support.
When contacting support, please have your product model (DT-10IN MAX) and part number (58907) available.
