Introduction
Thank you for choosing the CRUA 34-inch Curved Gaming Monitor. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your new monitor. Designed for an immersive visual experience, this monitor features a WQHD (3440x1440) resolution, a 165Hz refresh rate, and a 1500R curvature, making it ideal for gaming, content creation, and multitasking.
Image: Front view of the CRUA 34-inch Curved Gaming Monitor.
What's in the Box
Please verify that all components are present in the packaging:
- 34-inch Curved Ultra-Wide Monitor
- Base and Support Stand
- Instruction Manual
- DP Cable (4.92ft/1.5m)
- Power Cable 12V 5A (4.92ft/1.5m)
Setup
1. Stand Assembly
The monitor features a snap-on design for easy assembly. No tools are required for attaching the base and support stand to the monitor. Align the stand with the mounting points on the back of the monitor and press firmly until it clicks into place.
2. Connecting the Monitor
Connect your devices to the monitor using the appropriate cables. The monitor is equipped with multiple input ports:
- DisplayPort (DP 1.4): For optimal performance, including the 165Hz refresh rate, use the provided DP cable to connect to your computer's graphics card.
- HDMI (HDMI 2.0): Connect to devices such as PCs, laptops, PS4/PS5, or Switch. Note that HDMI supports refresh rates up to 120Hz.
- 3.5mm Audio Output: Connect external speakers or headphones for audio output.
Image: Rear view of the monitor displaying the DC, HDMI, and DP input ports.
3. Power Connection
Connect the power cable to the DC input port on the monitor and then plug the other end into a power outlet.
Operating Instructions
1. Powering On/Off
Press the power button, typically located on the back or bottom right of the monitor, to turn the monitor on or off. An indicator light will show the power status.
2. On-Screen Display (OSD) Menu
The OSD menu allows you to adjust various display settings. Buttons for OSD navigation are usually located on the back of the monitor. Use these buttons to navigate through options such as brightness, contrast, color temperature, input source, and picture modes.
3. Display Modes (PIP/PBP)
The monitor supports Picture-in-Picture (PIP) and Picture-by-Picture (PBP) modes, allowing you to display content from two different sources simultaneously. Refer to the OSD menu for options to configure these modes.
Image: Illustration of PIP and PBP display modes, showing two input sources simultaneously.
4. Refresh Rate and FreeSync
To achieve the 165Hz refresh rate, ensure you are using a DisplayPort connection and that your graphics card supports this refresh rate. Enable FreeSync in your graphics card settings and through the monitor's OSD menu to synchronize the monitor's refresh rate with your GPU's frame rate, reducing screen tearing and stuttering.
Image: Visual comparison of FreeSync off versus FreeSync on, showing reduced screen tearing.
5. Low Blue Light Mode
Activate the Low Blue Light mode via the OSD menu to reduce eye strain during prolonged use. This feature adjusts the display's color temperature to minimize blue light emissions.
Video: Overview of the CRUA 34-inch Curved Gaming Monitor's features and performance.
Maintenance
To ensure the longevity and optimal performance of your monitor, follow these maintenance guidelines:
- Cleaning the Screen: Gently wipe the screen with a soft, lint-free cloth. For stubborn smudges, lightly dampen the cloth with water or a screen-cleaning solution. Avoid using harsh chemicals or abrasive materials.
- Cleaning the Casing: Use a soft, dry cloth to clean the monitor's casing.
- Ventilation: Ensure the monitor's ventilation openings are clear and not obstructed to prevent overheating.
- Power Off When Not in Use: Turn off the monitor when not in use for extended periods to conserve energy and prolong its lifespan.
Troubleshooting
If you encounter issues with your monitor, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Power | Power cable disconnected; Power outlet issue | Check power cable connection to monitor and outlet; Test outlet with another device. |
| No Signal | Input cable disconnected; Incorrect input source selected | Ensure DP/HDMI cable is securely connected; Select correct input source via OSD menu. |
| Screen Tearing/Stuttering | FreeSync not enabled; Refresh rate mismatch | Enable FreeSync in monitor OSD and graphics card settings; Ensure DP cable is used for 165Hz. |
| Flickering Display | Cable issue; Graphics driver issue | Try a different DP/HDMI cable; Update graphics drivers. |
| Image is too dark/bright | Brightness/Contrast settings incorrect | Adjust brightness and contrast settings through the OSD menu. |
Specifications
Detailed technical specifications for the CRUA 34-inch Curved Gaming Monitor (Model CR340HDU):
- Model Number: CR340HDU
- Screen Size: 34 inches
- Curvature: 1500R
- Aspect Ratio: 21:9
- Resolution: WQHD (3440 x 1440 Pixels)
- Refresh Rate: 165Hz (via DP 1.4), 120Hz (via HDMI 2.0)
- Panel Type: VA
- Color Gamut: 120% sRGB
- Brightness: 300 cd/m²
- Contrast Ratio: 4000:1
- Color Support: 16.7 Million Colors (8-bit)
- Viewing Angle: 178° (Horizontal/Vertical)
- Connectivity: 2x HDMI 2.0, 2x DisplayPort 1.4, 1x 3.5mm Audio Output
- Ergonomics: Tilt Adjustable (-5° to 20°), VESA Wall-Mount Compatible (75mm x 75mm)
- Features: FreeSync, PIP/PBP Modes, Low Blue Light Mode, Matte Screen Surface
- Product Dimensions: 0.39 x 23 x 17 inches
- Item Weight: 15.82 pounds
Warranty and Support
CRUA provides high-quality computer monitors and premium services. Your CRUA monitor includes a 1-3 year warranty. For any questions, technical assistance, or warranty claims, please contact us via email.
Email: service@crua-monitor.com
We are committed to serving you and resolving any issues you may encounter.
Image: CRUA customer support details, including warranty and contact information.
