JOYMOR 5-in-1 Baby Bassinet Bedside Sleeper

Introduction

Thank you for choosing the JOYMOR 5-in-1 Baby Bassinet Bedside Sleeper. This versatile product is designed to provide a safe and comfortable sleeping environment for your newborn, adapting to various needs as a standalone bassinet, bedside co-sleeper, changing station, rocking cradle, and a baby bed with a mosquito net. Please read this manual thoroughly before assembly and use to ensure proper function and safety.

Safety Information

WARNING: Failure to follow these warnings and instructions could result in serious injury or death.

• Always ensure all parts are correctly assembled and securely fastened before each use.
• Never leave your child unattended in the bassinet or on the changing table.
• The maximum weight capacity for this bassinet is 33 pounds (15 kg). Discontinue use when the child begins to push up on hands and knees, or reaches 33 pounds, whichever comes first.
• Do not use this product if any parts are missing, damaged, or broken. Contact customer service for replacement parts.
• Keep small parts away from children during assembly.
• Ensure the bassinet is placed on a firm, horizontal level floor.
• When using as a bedside co-sleeper, ensure the bassinet is securely attached to the adult bed and there are no gaps between the bassinet and the adult mattress.
• Only use the mattress provided by the manufacturer. Do not add extra padding or mattresses, as this can cause suffocation.

Components List

Please verify that all components are present before beginning assembly:

• Bassinet Frame (Aluminum Alloy Legs)
• Bassinet Fabric Assembly (with mesh sides)
• Mattress (with 2 washable covers)
• Changing Table Attachment
• Mosquito Net
• Storage Basket
• Wheels (integrated with frame)
• Attachment Straps for Bedside Sleeper Mode

Setup and Assembly

Assembly typically takes approximately 45 minutes. Follow the instructions carefully.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface.
2. Assemble Frame: Connect the aluminum alloy legs according to the diagram. Ensure all locking mechanisms click into place. The triangular support structure provides stability.
3. Attach Bassinet Fabric: Secure the bassinet fabric assembly to the frame. Ensure all zippers and snaps are properly fastened. The four-sided mesh design promotes air circulation.
4. Insert Mattress: Place the provided mattress into the bassinet. Use one of the washable mattress covers.
5. Install Storage Basket: Attach the extra-large storage basket to the designated area beneath the bassinet.
6. Attach Changing Table (Optional): If using the changing table, secure it to the top of the bassinet frame. Ensure it is stable and locked in place. The upgraded changing table features a deeper, wrap-around design for security.
7. Install Mosquito Net (Optional): Attach the mosquito net over the bassinet for added protection.

Operating Instructions

5-in-1 Multifunctional Design

• Standalone Bassinet: Use the bassinet independently in any room.
• Bedside Co-sleeper: Lower one side of the bassinet and use the provided straps to securely attach it to your adult bed. This allows for close proximity to your baby while maintaining a separate sleeping space.
• Changing Station: Attach the changing table to the top of the bassinet for convenient diaper changes. The elevated design minimizes bending.
• Rocking Cradle: Adjust the legs to engage the rocking function for gentle soothing.
• Baby Bed with Mosquito Net: Use the included mosquito net to protect your baby from insects.

Height Adjustment

The bassinet features 7 adjustable height settings, ranging from 32" to 38" (from the floor to the top edge of the bassinet). This allows it to align with adult beds ranging from 16" to 24" in height. To adjust the height, locate the adjustment levers on each side of the bassinet frame, press them, and raise or lower the bassinet to the desired level. Ensure both sides are adjusted to the same height for stability.

Mobility and Wheels

The bassinet is equipped with 2 auto-lock wheels for easy mobility. To move the bassinet, lift one side slightly to engage the wheels. When the bassinet is set down, the wheels retract, providing a stable floor grip and preventing accidental movement. This design eliminates the need for manual wheel locks.

Storage Basket

An extra-large storage basket is located beneath the bassinet, providing convenient space for storing baby essentials such as diapers, wipes, clothes, and toys.

Maintenance

Cleaning Instructions

To maintain a clean and hygienic environment for your baby, the bedding fabric and mattress covers are removable and washable.

• Fabric Components: The bassinet's fabric components, including the bedding and mattress covers, can be machine washed. Refer to the care label for specific temperature and cycle recommendations.
• Changing Table Fabric: The fabric on the changing table is easy to remove for cleaning. Wipe down the changing table surface with a damp cloth and mild soap.
• Frame: Wipe the aluminum alloy frame with a damp cloth and mild soap. Do not use abrasive cleaners.

Troubleshooting

If you encounter any issues with your JOYMOR Bassinet, please refer to the following common solutions:

• Difficulty Adjusting Height: Ensure both adjustment levers are fully pressed simultaneously when attempting to change the height. Check for any obstructions.
• Bassinet Not Stable: Verify that all frame connections are securely locked and that the bassinet is placed on a flat, even surface. Ensure the auto-lock wheels are retracted when the bassinet is stationary.
• Changing Table Not Secure: Double-check that the changing table attachment is correctly seated and locked onto the bassinet frame.
• Rocking Function Not Engaging: Ensure the legs are properly positioned to allow for the rocking motion. Refer to assembly instructions for correct configuration.

If problems persist, please contact JOYMOR customer support.

Specifications

Warranty and Support

For warranty information or customer support, please refer to the product packaging or contact JOYMOR directly through their official website or customer service channels. Please have your model number (BSTC) and purchase details ready when contacting support.