ROCAM CR1028EM Loud Vibrating Alarm Clock User Manual

Introduction

The ROCAM CR1028EM Loud Vibrating Alarm Clock is designed to provide a reliable wake-up solution for heavy sleepers, individuals with hearing impairment, and anyone needing a robust alarm. It features a large LED digital display, dual alarms, adjustable brightness, a nightlight, and a bed shaker for enhanced wake-up effectiveness.

This manual provides detailed instructions for setting up, operating, and maintaining your alarm clock to ensure optimal performance.

Package Contents

• 1x ROCAM CR1028EM Alarm Clock
• 1x Power Adapter (DC 5V/2A)
• 1x Bed Shaker (Length: 1.8m/6ft)
• 1x USB Charging Cable
• 1x User Manual

Product Overview & Controls

Familiarize yourself with the alarm clock's components and control buttons:

Image: Front view of the ROCAM CR1028EM alarm clock, showing the large LED display with time and day indicators.

Top Panel Buttons:

• TIME/DIM: Press to set time and date. Long press to adjust display brightness.
• AL1: Short press to turn Alarm 1 on/off. Long press to set Alarm 1.
• AL2: Short press to turn Alarm 2 on/off. Long press to set Alarm 2.
• - / +: Adjust values during setting modes.
• VOL / 12/24H DST: Adjust alarm volume. Short press to switch between 12/24 hour format. Long press to activate/deactivate Daylight Saving Time (DST).
• SNOOZE/OK/LIGHT: Press to snooze a sounding alarm (9 minutes). In normal mode, short press to adjust nightlight brightness. Long press to confirm settings.

Image: Diagram showing the layout and functions of the control buttons on the top of the alarm clock.

Rear Panel Ports & Switches:

• Battery Compartment: Holds 2x AAA batteries (not included) for time memory and alarm backup during power outages.
• Speaker: For audible alarm sound.
• Vibration Intensity Switch (H/M/L): Adjusts the strength of the bed shaker.
• DC IN Port: Connects to the power adapter.
• USB Output Port (5V 1A): For charging external devices like smartphones.
• Bed Shaker Power Port: Connects the bed shaker.
• Day Selection Switches (MON-SUN, MON-FRI, SAT-SUN): Set alarm days for Alarm 1 and Alarm 2 independently.

Image: Diagram illustrating the ports, switches, and battery compartment on the rear panel of the alarm clock.

Setup

1. Power Connection: Connect the power adapter to the DC IN port on the back of the alarm clock, then plug the adapter into a standard wall outlet.
2. Battery Installation (Optional): Open the battery compartment on the rear and insert 2x AAA batteries. These batteries serve as a backup for time settings and alarm functionality during power interruptions. The display will turn off when running on battery power only, but the alarm will remain active.
3. Bed Shaker Connection: Plug the bed shaker cable into the Bed Shaker Power Port on the rear of the alarm clock. Place the bed shaker under your pillow or mattress for optimal vibration.
4. Initial Time Setting:
   • Press and hold the TIME/DIM button until the time digits start flashing.
   • Use the + or - buttons to adjust the hour. Press TIME/DIM again to move to minutes.
   • Use the + or - buttons to adjust the minutes. Press TIME/DIM again to move to the day of the week.
   • Use the + or - buttons to select the current day.
   • Press TIME/DIM or SNOOZE/OK/LIGHT to confirm and exit time setting mode.

Operating Instructions

Setting Alarms (AL1 & AL2):

1. Press and hold either AL1 or AL2 button until the alarm time digits start flashing.
2. Use the + or - buttons to adjust the hour. Press the respective AL button again to move to minutes.
3. Use the + or - buttons to adjust the minutes. Press the respective AL button again to select the alarm mode (Buzzer Only, Vibration Only, or Both).
4. Use the + or - buttons to choose the desired alarm mode.
5. Press the respective AL button or SNOOZE/OK/LIGHT to confirm and save the alarm setting.

Turning Alarms On/Off:

• Short press AL1 or AL2 button to toggle the alarm on or off. The corresponding alarm icon will appear/disappear on the display.
• To completely cancel an alarm for the next day, press and hold the respective AL button until the alarm indicator disappears.

Snooze Function:

• When the alarm sounds, press the SNOOZE/OK/LIGHT button to activate snooze. The alarm will temporarily stop and ring again after 9 minutes. This can be repeated up to 9 times.

Adjusting Display Brightness:

• In normal time display mode, short press the TIME/DIM button to cycle through 5 levels of display brightness (L05 being brightest, L01 being dimmest).

Using the Nightlight:

• In normal time display mode, short press the SNOOZE/OK/LIGHT button to cycle through 3 levels of nightlight brightness (High, Medium, Low, Off).

Adjusting Vibration Intensity:

• On the rear panel, slide the Vibration Intensity Switch to H (High), M (Medium), or L (Low) to set the desired strength of the bed shaker.

Charging External Devices:

• Connect your mobile device's USB charging cable (not included) to the USB Output Port (5V 1A) on the rear of the alarm clock.

Media Integration

Image: The ROCAM CR1028EM alarm clock displayed next to its bed shaker, highlighting the dual wake-up functionality.

Image: The ROCAM CR1028EM alarm clock on a nightstand, showing a smartphone charging via its built-in USB port.

Image: The ROCAM CR1028EM alarm clock with its nightlight feature illuminated, providing a soft glow.

Troubleshooting

• Alarm not sounding/vibrating: Ensure the alarm is enabled (icon visible on display) and the volume/vibration intensity is set appropriately. Check power connection and battery backup.
• Display too bright/dim: Adjust display brightness using the TIME/DIM button.
• Time incorrect: Re-set the time following the "Initial Time Setting" instructions. Check DST setting if applicable.
• Bed shaker not working: Ensure the bed shaker is securely plugged into its dedicated port and the vibration intensity switch is not set to 'Off' or 'Low' if a stronger vibration is desired.

Specifications

Warranty and Support

Your ROCAM CR1028EM Loud Vibrating Alarm Clock comes with:

• 18-Month Warranty: If the product has any quality issues, please contact ROCAM for a replacement or partial refund.
• Lifetime Free Customer Support: ROCAM provides lifelong free customer support. If you have any questions or concerns, please do not hesitate to reach out.

For support, please contact ROCAM via:

• Email: Support@yelaw.net
• Website: http://www.yelaw.net