LCAOPC White 5 Drawer Metal Dresser Instruction Manual

Important Safety Information

Please read and understand all instructions before assembling and using this product. Keep this manual for future reference.

• Adult Assembly Required: This product requires assembly by adults.
• Tip-Over Hazard: Furniture tip-overs can cause serious or fatal injuries. Always secure this dresser to the wall using the provided anti-tip kit.
• Weight Limits: Do not exceed the stated weight capacities. Top weight capacity: 120 lbs. Drawer weight capacity: 60 lbs per drawer.
• Stable Surface: Place the dresser on a flat, level, and stable surface.
• Children Safety: Do not allow children to climb on or play with the dresser. Keep small parts and packaging materials away from children.

Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

Assembly Instructions

For a visual guide, please refer to the official installation video below.

1. Prepare Components: Lay out all parts and hardware on a clean, soft surface to prevent scratches. Identify parts A, B, E, and M as shown in the video.
2. Assemble the Base Frame: Attach the higher legs (E) to the front side panels (A) with bigger holes. Attach the lower legs (M) to the back side panels (B) with smaller holes. Secure with screws.
3. Attach Back Panels: Insert the back panels (C) into the grooves of the side panels. Ensure the concave side of the back panels faces outward. Secure with screws.
4. Install Top Panel: Place the top panel (H) onto the assembled frame. Ensure the side with the fence stay is in the same direction as where the drawers will be inserted. Secure with screws.
5. Assemble Drawers: For each drawer, take parts Z (drawer back panel) and insert it into the middle of part Y (drawer side panel). Push the back drawer seal to the end. Ensure the glazed panel of part Z faces you and is pushed to the end. Secure the drawer components with screws.
6. Attach Drawer Handles: Secure the gold handles to the front of each drawer (part X) using the provided screws.
7. Install Drawer Rails: Separate the inner part of the drawer rails. Attach the outer rail parts to the inside of the dresser frame, paying attention to the 'R' (right) and 'L' (left) labels. Attach the inner rail parts to the sides of each assembled drawer.
8. Insert Drawers: Carefully align the drawer rails and slide each drawer into its designated slot in the dresser frame.
9. Install Adjustable Pads: Screw the adjustable plastic pads into the bottom corners of the dresser to ensure stability and protect your floor.

Operating Instructions

This dresser is designed for simple and smooth operation.

• Opening Drawers: Gently pull the gold handle of the desired drawer outwards. The ball-bearing slides ensure smooth extension.
• Closing Drawers: Push the drawer inwards until it is fully closed and flush with the dresser frame.
• Loading Drawers: Distribute items evenly within the drawers to maintain balance and prevent strain on the slides. Do not overload drawers beyond the 60 lbs capacity.

Maintenance

To keep your LCAOPC metal dresser in optimal condition, follow these simple maintenance guidelines:

• Cleaning: Wipe the dresser surfaces with a dry, soft cloth. Avoid using harsh chemicals, abrasive cleaners, or wet cloths, as these may damage the environmental powder coating.
• Regular Checks: Periodically check all screws and fasteners to ensure they are tight. Tighten if necessary to maintain stability.
• Avoid Moisture: While the dresser is moisture-proof and rust-resistant, avoid prolonged exposure to excessive moisture or humidity.
• Protect Surfaces: Use coasters or protective pads under items placed on the top surface to prevent scratches.

Troubleshooting

If you encounter any issues with your dresser, refer to the following common problems and solutions:

Specifications

• Brand: LCAOPC
• Model Name: LCA-CT05-WH
• Product Dimensions: 15.75"D x 31.5"W x 47.72"H
• Color: White
• Mounting Type: Free Standing
• Room Type: Bedroom, Closet, Dressing Room, Home Office, Living Room
• Special Feature: Levelers, Scratch Resistant
• Drawer Type: Ball Bearing Slide
• Item Weight: 84 Pounds
• Number of Drawers: 5
• Material: High-quality Metal with environmental powder coating

Warranty and Support

LCAOPC stands behind the quality of its products. This dresser comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, claims, or technical support, please contact LCAOPC Direct customer service through your purchase platform or visit the official LCAOPC website.

Customer Support: For assistance, please refer to the contact information provided with your purchase or on the LCAOPC brand store page.