1. Introduction
This manual provides detailed instructions for the safe and efficient use of your mouhtfao Automatic Swing Door Opener, Model ZDKQJ1. This device is designed to automate the opening and closing of swing doors, enhancing accessibility and convenience in various settings. Please read this manual thoroughly before installation and operation to ensure proper function and to prevent damage or injury.
Image 1.1: The main unit of the mouhtfao Automatic Swing Door Opener, showcasing its compact design.
2. Safety Information
Your safety is paramount. This automatic door opener incorporates several safety features. Adhere to all warnings and instructions to prevent accidents.
- Obstacle Detection: The system is equipped with a safety feature that automatically reopens the door if an object is detected in its closing path. This prevents accidents and injuries.
- Ensure all installation steps are followed correctly by a qualified individual.
- Keep the area around the door clear of obstructions during operation.
- Do not attempt to repair or modify the unit yourself. Contact qualified service personnel.
- This product is not water-resistant. For outdoor use, ensure adequate rain shelter is provided.
Image 2.1: Illustration of the automatic door opener's obstacle detection feature, showing the door reopening when a person is in its path.
3. Package Contents
Verify that all components are present and undamaged upon unpacking:
- 1 x Automatic Swing Door Opener Unit
- 2 x Remote Controllers
- 2 x Switches
- 1 x Pull Arm
- 1 x Push Arm
- 5 x ID Cards
- 1 x Control Panel
- 1 x Sensor
- 1 x English RF Card Access Manual
- 1 x Chinese Installation Manual (Refer to English manual for primary instructions)
- 1 x Chinese Sensor Manual (Refer to English manual for primary instructions)
- All necessary accessories for assembly
4. Product Features
The mouhtfao Automatic Swing Door Opener offers a range of features designed for convenience, safety, and adaptability:
- Multiple Access Options: Control door opening and closing within a 49-foot radius using the remote control. Additional access methods include a code entry via the control panel, ID card swipe, or a dedicated door opener switch.
- Powerful and Compact Design: The opener unit measures approximately 20.27 x 3.15 x 3.74 inches. It supports doors with a maximum weight of 220 pounds and a width between 26 and 47.24 inches. It can open doors up to 120° and provides a closing force of approximately 66 lbs.
- Adjustable Parameters: A dedicated programmer allows for customization of operational parameters, such as opening time and door holding time, to suit specific user needs.
- Safety Obstacle Detection: If an object is detected in the door's closing path, the system will automatically reverse and reopen to prevent accidents.
- Manual / Automatic Modes: The system can operate in both automatic and manual modes. In manual mode, the door opens with low pressure and closes slowly, facilitating easier use for individuals with mobility challenges or pedestrians.
- Durable Construction for Outdoor Use: Features an ABS shell and an aluminum alloy cover, suitable for environments with temperatures ranging from -4°F to 122°F. Note: This product requires additional rain shelter for outdoor installation.
- Wide Application: Suitable for various settings including residential homes, commercial buildings, hospitals, meeting rooms, and other high-traffic areas.
Image 4.1: Visual representation of the door opener's capacity, including maximum weight (220 lbs), width (47.24 inches), open angle (120°), and closing force (66 lbs).
Image 4.2: The door opener's suitability for outdoor use, highlighting its ABS shell and aluminum alloy cover, and operational temperature range.
Image 4.3: Various application scenarios for the door opener, including family homes, hospitals, meeting rooms, and residential halls.
5. Specifications
| Attribute | Detail |
|---|---|
| Brand | mouhtfao |
| Model Number | ZDKQJ1 |
| Item Weight | 18.3 pounds |
| Product Dimensions | 20.2 x 3.1 x 3.7 inches |
| Material | Acrylonitrile Butadiene Styrene (ABS), Aluminum |
| Max Door Weight | 220 pounds |
| Max Door Width | 47.24 inches |
| Max Open Angle | 120° |
| Closing Force | Approximately 66 lbs |
| Operating Temperature | -4°F to 122°F |
| UPC | 756804430603 |
6. Setup and Installation
The mouhtfao Automatic Swing Door Opener supports multiple installation configurations to accommodate different door types and opening directions. Professional installation is recommended.
6.1 Installation Types
- Pull Rod Installation: For doors that open inward. The pull arm is configured to pull the door open.
- Push Rod Installation: For doors that open outward. The push arm is configured to push the door open.
Refer to the included installation manual for detailed diagrams and step-by-step instructions specific to your chosen installation type. Ensure all mounting hardware is securely fastened.
Image 6.1: Visual guide illustrating the two primary installation methods: Pull Rod for inward-opening doors and Push Rod for outward-opening doors.
7. Operating Instructions
The door opener offers several convenient methods for operation:
7.1 Access Methods
- Remote Control: Use the provided remote controllers to open and close the door from up to 49 feet away. The remote typically includes buttons for Lock, Hold-Open, Reset, and Auto functions.
- ID Card: Swipe a registered ID card on the control panel to activate the door.
- Password Entry: Enter a pre-programmed password on the control panel keypad.
- Wall Switch: Press the installed door opener switch for quick access.
7.2 Manual / Automatic Mode Selection
The system can be switched between automatic and manual modes:
- Automatic Mode: The door operates fully automatically based on sensor detection or remote/panel commands.
- Manual Mode: In this mode, the door opens with low pressure and closes slowly, requiring a gentle push or pull to initiate movement. This is particularly useful for individuals who prefer a slower, more controlled operation or for those with limited mobility.
Image 7.1: Overview of convenient door opening options, including remote control, ID card, password entry, and a wall-mounted switch.
Image 7.2: A user operating the door in manual mode, illustrating the low-pressure opening and slow-moving closing features.
8. Parameter Adjustment
The automatic door opener is equipped with a programmer that allows you to customize various operational parameters to best suit your requirements.
8.1 Adjustable Settings
- Opening Time: Adjust the speed at which the door opens (e.g., 3-7 seconds for 90° opening).
- Door Holding Time: Set the duration the door remains open before automatically closing (e.g., 1-30 seconds).
Refer to the specific instructions provided with the programmer for detailed steps on how to access and modify these settings. The system also supports external connections for components like electric locks or magnetic locks (not included) for enhanced functionality.
Image 8.1: Visual guide for parameter adjustment, highlighting options for door opening time (3-7s/90°) and door holding time (1-30s).
9. Maintenance
Regular maintenance ensures the longevity and optimal performance of your automatic door opener.
- Regular Cleaning: Keep the main unit, arms, and sensors clean from dust and debris. Use a soft, dry cloth.
- Check Connections: Periodically inspect all electrical connections and mounting hardware for tightness and wear.
- Lubrication: Consult the detailed installation manual for any specific lubrication requirements for moving parts.
- Sensor Functionality: Test the obstacle detection sensor regularly to ensure it is functioning correctly.
- Battery Check: If remote controllers use batteries, check and replace them as needed.
For any complex maintenance or repairs, contact a qualified technician.
10. Troubleshooting
If you encounter issues with your automatic door opener, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Door does not open/close | No power; Remote battery low; Sensor obstructed; System error. | Check power supply; Replace remote battery; Clear sensor path; Reset system (refer to programmer manual). |
| Door opens/closes slowly or with difficulty | Door weight exceeds limit; Obstruction in door path; Parameter settings incorrect. | Verify door weight is within specifications; Remove obstructions; Adjust opening/closing speed parameters. |
| Obstacle detection not working | Sensor dirty or misaligned; Sensor faulty. | Clean and realign sensor; Contact support if sensor is faulty. |
| Remote control not responding | Battery low/dead; Out of range; Remote not paired. | Replace battery; Move closer to the door opener; Re-pair remote control (refer to RF card access manual). |
If the problem persists after attempting these solutions, please contact customer support.
11. Warranty and Support
Specific warranty details for the mouhtfao Automatic Swing Door Opener, Model ZDKQJ1, are not provided in this manual. For information regarding warranty coverage, technical support, or replacement parts, please refer to your purchase documentation or contact the manufacturer directly through their official website or customer service channels.