Tecnock S9606C

Tecnock RC Car Model S9606C Instruction Manual

1:18 Scale RC Car with LED Lights, 2.4GHz 2WD All-Terrain

1. Introduction

This manual provides essential information for the safe operation, setup, and maintenance of your Tecnock RC Car Model S9606C. Please read it thoroughly before first use to ensure proper function and longevity of the product.

2. Safety Information

CHOKING HAZARD – Small parts. Not for children under 3 years.

  • Always operate the RC car in open areas, away from people, pets, and obstacles.
  • Do not operate near water or in wet conditions to prevent electrical damage.
  • Keep fingers, hair, and loose clothing away from moving parts, especially the wheels.
  • Adult supervision is recommended for children operating the RC car.
  • Use only the specified batteries and charging methods.
  • Do not attempt to modify or disassemble the RC car or remote control.

3. Package Contents

Verify that all items are present in the package:

  • Tecnock RC Car Model S9606C
  • 2.4GHz Remote Control
  • Rechargeable Car Battery (Nickel-Cadmium)
  • USB Charging Cable (Type-C)
  • AA Batteries for Remote Control (pre-installed or included)
  • Screwdriver
  • Instruction Manual
Tecnock RC Car, remote control, and USB charging cable
Image 3.1: Contents of the Tecnock RC Car package, including the car, remote control, and charging cable.
Tecnock RC Car with dimensions and accessories
Image 3.2: The RC car shown with its approximate dimensions and included accessories like the remote, batteries, and screwdriver.

4. Components Overview

4.1 RC Car Features

  • Durable PVC Shell: Provides protection and features a textured design.
  • LED Lights: Integrated lights for enhanced visual experience.
  • Powerful Motor: Enables speeds up to 15 km/h.
  • Robust Suspension & Shock Absorbers: For stable driving on various surfaces.
  • Durable Anti-Slip Tires: Designed for all-terrain performance.
  • Rechargeable Battery: Provides over 50 minutes of playtime per charge.
Diagram showing powerful motor, resilient shell, shock absorber, and anti-slip tires
Image 4.1: Key components of the RC car, including the powerful motor, resilient shell, shock absorbers, and anti-slip tires.

4.2 Remote Control

The 2.4GHz remote control ensures smooth operation and prevents signal interference. It typically features a steering wheel for direction and a trigger for forward/backward movement.

5. Setup

5.1 Remote Control Battery Installation

  1. Locate the battery compartment on the back of the remote control.
  2. Use a screwdriver to open the battery cover.
  3. Insert the required AA batteries, ensuring correct polarity (+/-).
  4. Replace the battery cover and secure it with the screw.

5.2 Charging the Car Battery

The RC car features a convenient Type-C charging port, eliminating the need to remove the battery for charging.

  1. Ensure the car is powered off.
  2. Locate the Type-C charging port on the RC car.
  3. Connect the provided USB charging cable to the car's charging port.
  4. Connect the other end of the USB cable to a compatible USB power adapter (not included) or a computer USB port.
  5. The charging indicator light on the car or cable will show charging status (refer to specific light behavior in the quick start guide if available).
  6. Charge until the indicator shows a full charge. A full charge provides approximately 50 minutes of playtime.
RC car being charged via Type-C USB cable
Image 5.1: The RC car's Type-C charging port, allowing direct charging without battery removal.
Comparison of Type-C charging versus traditional battery removal for charging
Image 5.2: Illustrates the convenience of Type-C charging compared to older methods requiring battery removal.

5.3 Pairing the Remote Control

  1. Turn on the RC car using the power switch located on the vehicle.
  2. Turn on the remote control.
  3. The remote control and car should automatically pair. A light on the remote or car may change from blinking to solid to indicate successful pairing.
  4. If pairing fails, turn both devices off and repeat the steps.

6. Operating Instructions

6.1 Basic Controls

  • Forward/Backward: Use the trigger on the remote control. Pull to move forward, push to move backward.
  • Left/Right Steering: Use the steering wheel on the remote control. Turn left to steer left, turn right to steer right.

6.2 Driving Tips

  • Start with slow movements to get accustomed to the controls.
  • The 2.4GHz system allows multiple RC cars to operate simultaneously without interference, making it suitable for racing.
  • The car is designed for all-terrain use, including grass, concrete, and light off-road conditions.
RC car driving on various terrains: road, rock, grass
Image 6.1: The RC car demonstrating its capability to operate on diverse terrains such as roads, rocky paths, and grassy areas.
Two RC cars racing with 2.4GHz anti-interference technology
Image 6.2: Two RC cars racing, highlighting the 2.4GHz anti-interference feature for multi-player use.

6.3 LED Lights

The integrated LED lights activate when the car is powered on, providing an exciting visual effect during operation.

Tecnock RC car with cool LED lights illuminated
Image 6.3: The RC car with its cool LED lights illuminated, enhancing visibility and aesthetic appeal.

7. Maintenance

7.1 Cleaning

  • Turn off the RC car and remote control before cleaning.
  • Use a soft, dry cloth to wipe down the car's body.
  • Remove any dirt or debris from the wheels and suspension components. Do not use water or harsh chemicals.

7.2 Battery Care

  • Always fully charge the car battery before use.
  • Do not overcharge or leave batteries charging unattended for extended periods.
  • If the car will not be used for a long time, remove batteries from both the car and the remote control.
  • Dispose of old batteries responsibly according to local regulations.

7.3 Storage

  • Store the RC car and remote control in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Keep out of reach of small children when not in use.

8. Troubleshooting

ProblemPossible CauseSolution
Car does not respond to remote.Low battery in car or remote; Not paired; Out of range.Charge car battery; Replace remote batteries; Re-pair devices; Operate within range.
Car moves slowly or inconsistently.Low car battery; Obstruction in wheels/gears.Recharge car battery; Check for and remove obstructions.
LED lights not working.Car not powered on; Electrical issue.Ensure car is on; Contact customer support if issue persists.
Remote control indicator light is off.Remote batteries are dead or incorrectly installed.Replace remote batteries, ensuring correct polarity.

9. Specifications

  • Model Number: S9606C
  • Scale: 1:18 Scale
  • Dimensions: 22.1 x 13.97 x 8.89 cm
  • Weight: 548.85 g
  • Material: Plastic
  • Battery Type (Car): Nickel-Cadmium (Rechargeable)
  • Battery Type (Remote): AA (Included)
  • Playtime: Approximately 50 minutes per charge
  • Max Speed: Up to 15 km/h
  • Control Frequency: 2.4GHz
  • Recommended Age: 8 years and up

10. Warranty and Support

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Tecnock website. Keep your purchase receipt as proof of purchase.

© 2025 Tecnock. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.