HOMCOM Backless Wobble Stool Chair Instruction Manual

Introduction

Thank you for choosing the HOMCOM Backless Wobble Stool Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new stool. Please read it thoroughly before use and retain it for future reference.

Image: The HOMCOM Backless Wobble Stool Chair positioned next to a standing desk in a modern office environment.

Safety Information

• Weight Limit: Do not exceed the maximum weight capacity of 265 lbs (120 kg) to prevent accidents and damage to the stool.
• Stable Surface: Always use the stool on a flat, stable, and level surface to avoid tipping hazards.
• Assembly: Ensure all components are correctly assembled and tightened before use. Refer to the assembly instructions.
• Movement: Be mindful of the stool's dynamic movement (wobble and swivel) when getting on and off.
• Children: Keep children away from the stool during assembly and supervise them if they use it.
• Cleaning: Use a dry cloth for cleaning. Avoid harsh chemicals that may damage the materials.

Package Contents

Verify that all parts are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• 1 x Seat Cushion Assembly
• 1 x Gas Lift Cylinder
• 1 x Base Assembly
• 1 x Instruction Manual

Image: A brown cardboard box with the HOMCOM logo, indicating "1x PACKAGE".

Setup and Assembly

Assembly is designed to be straightforward and can typically be completed by one person in under 10 minutes. Follow these general steps:

1. Attach Gas Lift to Base: Insert the narrow end of the gas lift cylinder into the center hole of the base assembly. Ensure it is seated firmly.
2. Attach Seat to Gas Lift: Place the seat cushion assembly onto the wider end of the gas lift cylinder. Press down firmly to secure it.
3. Test Stability: Gently sit on the stool to ensure all components are securely connected and stable.

Image: A diagram illustrating the dimensions of the assembled wobble stool, showing height from 27.6" to 35.4" and base width of 14.2".

Operating Instructions

Height Adjustment

To adjust the stool's height, locate the black button positioned underneath the seat. Press this button while simultaneously raising or lowering the seat to your desired height. The stool can be adjusted between 27.5 inches and 35.4 inches.

Image: A visual guide demonstrating the height adjustment mechanism, showing the button under the seat and the stool moving between lowered (27.5") and raised (35.4") positions.

Dynamic Movement

The HOMCOM Wobble Stool is designed for active sitting. It features a 360-degree swivel and a 120-degree tilt motion, allowing for dynamic movement while seated or leaning. This design encourages core engagement and flexibility.

Image: A diagram illustrating the stool's pendulum-like design, highlighting its stability and ability to tilt and swivel.

Image: A person seated on the wobble stool at a standing desk, demonstrating its use and highlighting its 265 lbs weight capacity.

Maintenance

To ensure the longevity and proper function of your wobble stool, follow these maintenance guidelines:

• Cleaning: Wipe the stool with a dry cloth to remove dust and dirt. Do not use liquid cleaners or abrasive materials.
• Inspection: Periodically check all connections and fasteners to ensure they remain tight. Retighten if necessary.
• Storage: Store the stool in a dry environment, away from direct sunlight and extreme temperatures.

Image: A close-up view of the black padded seat of the wobble stool, showing its texture and cushioning.

Troubleshooting

If you encounter any issues with your HOMCOM Wobble Stool, refer to the following common solutions:

• Stool is unstable or wobbly:
  • Ensure all assembly connections are securely tightened.
  • Verify the stool is on a flat, level surface.
• Height adjustment not working:
  • Check if the height adjustment button is fully depressed.
  • Ensure no obstructions are preventing the gas lift from moving.
• Squeaking noises:
  • Inspect for loose parts and tighten them.
  • Apply a small amount of silicone lubricant to moving parts if necessary, avoiding contact with the seat fabric.

Specifications

Image: A detailed view of the large spiral stool base made of non-slip nylon material, suitable for carpet and composite wood floors.

Customer Support

For further assistance, missing parts, or warranty inquiries, please contact HOMCOM customer service. Refer to your purchase documentation for specific contact details or visit the official HOMCOM website.

Website: www.aosom.com (Aosom is the manufacturer of HOMCOM products)