Introduction
Thank you for choosing the gotonovo Bathtub Shower Faucet Set. This manual provides essential information for the safe installation, operation, and maintenance of your new shower system. Please read these instructions carefully before beginning installation and retain them for future reference.
Important Safety Information
Professional Installation Recommended: Installation of this product requires plumbing knowledge. If you are unsure about any steps, it is highly recommended to consult a qualified professional plumber.
Valve Compatibility: This tub shower faucet set includes a specific valve body. It is NOT compatible with valves and cartridges from other brands. The existing valve body in your wall must be removed before installing this unit. This may require altering the plumbing behind the wall or removing tiles.
The image above highlights the importance of using the provided valve and consulting a professional plumber before purchase and installation to ensure compatibility and proper setup.
Package Contents
Verify that all components are present before beginning installation:
- 6-inch 6-setting shower head
- Brass Valve Body
- Installation Hardware
- Installation Instruction Manual (this document)
- Metal Tub Spout
This video demonstrates the unboxing and shows the various accessories included with the gotonovo Bathtub Shower Faucet Set.
Setup & Installation
Before installation, ensure the main water supply is turned off. Follow these steps carefully:
1. Valve Body Installation
The included brass valve body is crucial for proper function and temperature control. As noted in the safety section, the existing valve must be removed. This valve features a pressure balance mechanism to maintain stable water pressure and temperature, preventing scalding.
The image above illustrates the brass rough-in valve body, showing the hot and cold water connections (NPT 1/2" male) and the shower head and tub spout connectors (NPT 1/2" male).
This image shows the pressure balance valve, highlighting its high-quality brass construction and cUPC certification, which helps maintain stable water pressure and temperature.
2. Tub Spout Installation
The metal bathtub spout provides a high flow rate for quick tub filling. It features a diverter knob to switch between the tub spout and the shower head.
This image details the 5.24-inch metal bathtub spout, showing its waterfall design and the requirement for a no-thread 1/2" nominal copper pipe (5/8" OD) with a recommended length of 1.38" (35mm) minimum to 3.34" (85mm) maximum out of the tile for proper installation.
3. Shower Head and Handle Installation
Install the 6-inch multi-function shower head and the single-handle control. The shower head can be adjusted 360° for optimal positioning.
The diagram above provides detailed product dimensions for the shower head (6-inch diameter, 7.09-inch arm length), the handle trim (6.69-inch diameter), and the tub spout (5.24-inch length). It also includes recommended embedment depths for the valve, both with and without iron plates, to ensure proper fit within the wall.
This video provides a general overview of the gotonovo Tub Shower Faucet Set, which can be helpful for understanding the components and overall installation process.
Operating Instructions
1. Water Flow and Temperature Control
The single handle controls both water flow and temperature. Rotate the handle to the left for hotter water and to the right for colder water. Pull the handle outwards to increase water flow and push it inwards to decrease or stop the flow.
The image above illustrates the single-handle design, demonstrating how to rotate it left for hot water, right for cold water, and pull/push to open/close the water flow.
2. Shower Head Spray Modes
The 6-inch multi-function shower head offers 6 distinct spray modes. These modes can be easily switched by rotating the dial on the shower head to customize your bathing experience.
This image displays the six available spray modes: Pause, Massage, Saturating + Massage, Intense Spray, Misty, and Misty + Intense Spray, which can be selected by turning the switch on the shower head.
This video demonstrates how to switch between the different spray modes on the shower head and operate the single handle for water flow and temperature.
3. Diverter Operation
To switch water flow from the tub spout to the shower head, pull up the diverter knob located on the tub spout. Push the knob down to direct water back to the tub spout.
Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your faucet set.
Cleaning the Shower Head Nozzles
The shower head is equipped with soft silicone nozzles. To remove mineral buildup or dirt, simply wipe the nozzles with your finger or a soft cloth. This helps maintain a clean appearance and consistent spray performance.
The image above shows the soft silicone nozzles, designed for easy cleaning to prevent calcification buildup.
General Cleaning
Clean the matte black finish with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish. Mild soap and water are generally sufficient for cleaning.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Low water flow from shower head or tub spout | Clogged nozzles or aerator; low water pressure in home; valve issue. | Clean shower head nozzles. Check home water pressure. Ensure valve is fully open. If issue persists, consult a plumber. |
| Water leaks from connections | Loose connections; worn O-rings or seals; improper installation. | Tighten connections. Check for damaged O-rings and replace if necessary. Ensure proper use of plumber's tape during installation. |
| Water temperature inconsistent or too hot/cold | Improper valve adjustment; issue with water heater. | Adjust the temperature limit stop on the valve cartridge if applicable (refer to valve instructions). Check water heater settings. |
| Diverter not switching properly | Debris in diverter mechanism; worn diverter. | Flush the system to clear debris. If the issue persists, the diverter may need inspection or replacement. |
Specifications
- Brand: gotonovo
- Model Number: B0DMQWN4CW
- Color: Matte Black
- Material: Acrylonitrile Butadiene Styrene (ABS), Brass, Metal
- Finish Type: Painted
- Number of Handles: 1
- Mounting Type: Wall Mount
- Flow Rate: 1.75 GPM (Gallons Per Minute)
- Shower Head Size: 6 inches
- Item Weight: 2.08 kg
- Included Components: 6 inch 6-setting shower head, Brass Valve, Installation Hardware, Installation Instruction, Metal Tub Spout
Warranty & Support
gotonovo products are manufactured to high-quality standards. For specific warranty details, please refer to the product packaging or contact gotonovo customer support directly. If you encounter any issues or have questions regarding your product, please reach out to our customer service team for assistance.